Paladin Skid Steer Mulcher

The Paladin Bradco MM60 and MM72 are high-flow skid steer forestry mulchers designed for demanding vegetation management and land-clearing applications. They are suitable for clearing brush, trees, pipeline corridors, utility right-of-ways, and other overgrown areas. The Ripping It Outdoors listing specifies tree mulching up to approximately 8 inches in diameter, depending on material and operating conditions.

The primary difference is the cutting width. The MM60 provides a 60-inch cutting width, while the MM72 provides a 72-inch cutting width. The wider MM72 can cover more ground per pass, while the MM60 may be preferable where a more compact working width is desirable. Paladin's current MM72 specifications list a 72-inch cutting width.

The skid-steer versions are designed for 30–45 GPM hydraulic flow. Paladin's operating manual provides setup information across this flow range, so the correct motor configuration and operating settings should be matched to the skid steer’s available hydraulic system.

The required hydraulic power depends on the specific MM60/MM72 configuration and carrier. Paladin's current MM72 specifications list 75–90 hydraulic HP for one configuration and 90–130 hydraulic HP for another, with operating-pressure ranges of 3,500–5,000 psi and 4,500–5,800 psi, respectively. Always verify the exact configuration against your skid steer before purchase.

The MM60 and MM72 use a rotor equipped with fixed hammers and replaceable cutting teeth. The Ripping It Outdoors listing specifies reversible carbide and claw tooth options. The machines also use a synchronous belt-drive system, which is designed to help prevent belt or sprocket slippage during operation.

Before purchasing, confirm your skid steer's hydraulic flow, hydraulic pressure, hydraulic horsepower, case-drain requirements, mounting/attachment compatibility, and available lift capacity. You should also select the appropriate 60" MM60 or 72" MM72 cutting width based on your clearing requirements. The current Paladin MM72 specification lists a weight of approximately 2,860–2,880 lbs, so carrier capacity is an important consideration.