Virnig Skid Steer High Dump Bucket

The Virnig DMP Series High Dump Bucket is a hydraulic rollout-style bucket designed for high-reach material handling and loading applications. It is particularly useful for loading materials into taller dump trucks, feed mixers, hoppers, and other elevated containers. The design can increase vertical lift by up to 44 inches and horizontal reach by approximately 13 inches, depending on the carrier machine.

The DMP Series is available in 60", 72", 84", and 96" models, designated DMP60, DMP72, DMP84, and DMP96. Overall widths are approximately 61.5", 73.5", 85.5", and 97.5", respectively. Selecting the right width depends on the available space, desired material-handling coverage, and the operating capacity of the skid steer.

The Virnig High Dump Bucket is designed for 15–25 GPM hydraulic flow and is intended for skid steer loaders with a recommended operating capacity of more than 1,800 lb. Before purchasing, operators should verify that their skid steer meets both the hydraulic-flow and loader-capacity requirements for the selected DMP model.

Capacity varies by model. The DMP60 provides approximately 22.8 cu. ft. struck and 27.4 cu. ft. heaped capacity, while the DMP96 provides approximately 36.6 cu. ft. struck and 43.9 cu. ft. heaped capacity. The DMP72 and DMP84 offer capacities between these sizes, allowing customers to select a bucket according to their material-handling requirements.

The DMP Series features NITROSTEEL® cylinder rods, Teflon®-coated bushings on all pivots, operator visibility windows, and a 3/4" × 6" weld-on cutting edge. It provides an approximately 86° dump angle in the specifications, helping release material efficiently. Optional bolt-on and serrated edge configurations are also available.

Choose among the DMP60, DMP72, DMP84, and DMP96 based on the required bucket width, material capacity, and your skid steer's operating capabilities. The approximate attachment weights range from 1,015 lb for the DMP60 to 1,310 lb for the DMP96, while all models are listed for loaders with more than 1,800 lb operating capacity and 15–25 GPM hydraulic flow. Confirm your machine's specifications and available attachment mount before ordering.