BAUMALIGHT MX1160R/D117X2 MULCHER 2 SPEED MOTOR OPTION 36000LBS - 66000LBS 40GPM - 60GPM 60" WORKING WIDTH For Excavator
BAUMALIGHT MX1160R/D117X2 MULCHER 2 SPEED MOTOR OPTION 36000LBS - 66000LBS 40GPM - 60GPM 60" WORKING WIDTH For Excavator
Share
DESCRIPTION
MX1160R (WITH A MOUNT AND PINS) NO HOSES PROVIDED **CASE DRAIN REQUIRED**MUST SPECIFY MOUNT**2 SPEED MOTOR OPTION
MX1160R Heavy Duty Fixed Tooth Mulcher for Excavator, 18 to 33 Ton The Baumalight MX1160R Brush Mulcher has a 60” rotor and is designed for excavators up to 33 tons. The MX1160R comes with unique performance boosting mulcher rings (licensed by Denis Cimaf). These rings improve the speed and efficiency of your mulching while reducing the risk of breakage on the tooth holders by limiting the size of the bites. The MX1160R uses a fixed tooth holder and comes with 31 sharpenable planer teeth (P11000), as you will see in the brush cutting size charts this allow mulching of much larger material with an average carrier. The MX1160R comes with aggressive root rake ripper teeth build into the frame to rip out rocks and move logs. The unit also has a heavier duty body, built with a low-weight, high-strength AR400 steel.
MX960R (WITH A MOUNT AND PINS) NO HOSES PROVIDED **CASE DRAIN REQUIRED** 2 SPEED MOTOR OPTION
The Baumalight MX960R Brush Mulcher has a 60” rotor and is designed for excavators starting at 18 ton up to 33 tons. The MX960R uses a fixed tooth holder comes with heavy duty double carbit tipped teeth (R9000), these teeth are ideal for vegetation management with lots of ground contact and don’t mind the occasional stone. Powered by a piston motor like all of the larger Baumalight mulchers the MX960R comes with aggressive root rake ripper teeth build into the frame to rip out rocks and move logs. The unit also has a heavier duty body, built with a low-weight, high-strength AR400 steel and is equipped with replaceable body wear plates.
SPECIFICATION
Part #: | MX1160R/D117X2 |
Mfg: | BAUMALIGHT |
Category: | EXCAVATOR ATTACHMENTS |
SubCategory: | MULCHER EXCAVATOR 35,000LBS-66,000LBS |
Industry: | CONSTRUCTION |
Machine Size: | 36000LBS-66000LBS 40GPM-60GPM |
Attachment Size: | 60" WORKING WIDTH |
Part #: | MX1160R/C1190 |
Mfg: | BAUMALIGHT |
Category: | EXCAVATOR ATTACHMENTS |
SubCategory: | MULCHER EXCAVATOR 35,000LBS-66,000LBS |
Industry: | CONSTRUCTION |
Machine Size: | 36000LBS-66000LBS 40GPM-60GPM |
Attachment Size: | 60" WORKING WIDTH |
Part #: | MX1160R/C1170 |
Mfg: | BAUMALIGHT |
Category: | EXCAVATOR ATTACHMENTS |
SubCategory: | MULCHER EXCAVATOR 35,000LBS-66,000LBS |
Industry: | CONSTRUCTION |
Machine Size: | 36000LBS-66000LBS 35GPM-50GPM |
Attachment Size: | 60" WORKING WIDTH |
Part #: | MX1160R/C1150 |
Mfg: | BAUMALIGHT |
Category: | EXCAVATOR ATTACHMENTS |
SubCategory: | MULCHER EXCAVATOR 35,000LBS-66,000LBS |
Industry: | CONSTRUCTION |
Machine Size: | 36000LBS-66000LBS 30GPM-40GPM |
Attachment Size: | 60" WORKING WIDTH |
Part #: | MX960R/C950 |
Mfg: | BAUMALIGHT |
Category: | EXCAVATOR ATTACHMENTS |
SubCategory: | MULCHER EXCAVATOR 35,000LBS-66,000LBS |
Industry: | CONSTRUCTION |
Machine Size: | 33,000LBS-66,000LBS 30-40GPM |
Attachment Size: | 60" CUTTING WIDTH |
Part #: | MX960R/D97X2 |
Mfg: | BAUMALIGHT |
Category: | EXCAVATOR ATTACHMENTS |
SubCategory: | MULCHER EXCAVATOR 35,000LBS-66,000LBS |
Industry: | CONSTRUCTION |
Machine Size: | 33,000LBS-66,000LBS 35-50GPM |
Attachment Size: | 60" WORKING WIDTH |
FEATURES
MX1160R
REPLACEABLE BOLT-IN LINER Save time by easily replacing the AR400 steel wear plates on the MX1160R without needing to remove the rotor. |
ADJUSTABLE BELT TENSIONER The adjustable belt tensioner ensures the proper tension of your belts, with no extra idler wheel that could wear out. Simply loosen the bolts and raise the motor mount to tighten the belt. |
BENT AXIS PISTON MOTORS ARE A STANDARD OPTION Our industry leading bent axis piston motors make the most use of your hydraulic flow and pressure for your brush clearing needs. |
WIRE PROTECTION KIT If you are mulching and you catch some old fence wire, it can really cause damage to the unit if the wire slips over the edge of the rotor and gets wrapped around the shaft. The wire can get bunched against the bearings, causing major damage. Our wire protection kit contains a welded raised area on the end of the rotor that protects the shaft and prevents wire from getting in. |
CHAIN CURTAIN The rear of the unit is guarded by a 3/8” thick chain curtain so standing brush enters and mulched debris exits. |
OVERTORQUE PROTECTION - RELIEF VALVE The relief valve protects the motor and the hydraulic system from pressure spikes. When an obstacle is hit the relief valves open and relieves the pressure. |
REINFORCED BELT A heavy duty reinforced belt delivers the force from the gear box to the rotor. This offers protection from the shocks inherent in mulching. |
EASY ACCESS GREASE FITTINGS Reduce your regular maintenance time by easily greasing the bearings on the MX1160R from outside the frame. No tools required. |
MX960R
REPLACEABLE BOLT-IN LINER | Save time by easily replacing the AR400 steel wear plates on the MX960R without needing to remove the rotor. |
ADJUSTABLE BELT TENSIONER | The adjustable belt tensioner ensures the proper tension of your belts, with no extra idler wheel that could wear out. Simply loosen the bolts and raise the motor mount to tighten the belt. |
BENT AXIS PISTON MOTORS ARE A STANDARD OPTION | Our industry leading bent axis piston motors make the most use of your hydraulic flow and pressure for your brush clearing needs. |
WIRE PROTECTION KIT | If you are mulching and you catch some old fence wire, it can really cause damage to the unit if the wire slips over the edge of the rotor and gets wrapped around the shaft. The wire can get bunched against the bearings, causing major damage. Our wire protection kit contains a welded raised area on the end of the rotor that protects the shaft and prevents wire from getting in. |
CHAIN CURTAIN | The rear of the unit is guarded by a 3/8” thick chain curtain so standing brush enters and mulched debris exits. |
OVERTORQUE PROTECTION - RELIEF VALVE | The relief valve protects the motor and the hydraulic system from pressure spikes. When an obstacle is hit the relief valves open and relieves the pressure. |
REINFORCED BELT | A heavy duty reinforced belt delivers the force from the gear box to the rotor. This offers protection from the shocks inherent in mulching. |
HOST MACHINE
MX1160R/C1190
CATERPILLAR 320 | |
CATERPILLAR 320 GC | |
CATERPILLAR 323 | |
CATERPILLAR 330 | |
DOOSAN DX225LC-5 | |
DOOSAN DX235LCR-5 | |
DOOSAN DX255LC-5 | |
HITACHI ZX250LC-6 | |
JOHN DEERE 160G LC | |
JOHN DEERE 190G W | |
JOHN DEERE 200G | |
JOHN DEERE 210G LC | |
JOHN DEERE 245G LC | |
JOHN DEERE 250G LC | |
KOBELCO SK230SRLC-5 | |
KOBELCO SK270SRLC-5 | |
KOMATSU PC170LC-11 | |
KOMATSU PC210LC-11 | |
KOMATSU PC238USLC-11 | |
KOMATSU PC240LC-11 | |
SANY SY215C | |
SANY SY225C | |
SANY SY265C |
MX1160R/C1170
CATERPILLAR 320 | |
CATERPILLAR 320 GC | |
CATERPILLAR 323 | |
CATERPILLAR M314 | |
DOOSAN DX180LC-5 | |
DOOSAN DX225LC-5 | |
HITACHI ZX180LC-6 | |
HITACHI ZX210-6 | |
JOHN DEERE 190G W | |
JOHN DEERE 200G | |
JOHN DEERE 210G LC | |
JOHN DEERE 245G LC | |
JOHN DEERE 250G LC | |
KOBELCO SK230SRLC-5 | |
KOMATSU PC170LC-11 | |
SANY SY215C | |
SANY SY225C | |
SANY SY265C |
MX1160R/C1150
CATERPILLAR M314 | |
DOOSAN DX180LC-5 | |
HITACHI ZX160LC-6 | |
HITACHI ZX180LC-6 | |
HITACHI ZX210-6 | |
KOMATSU PC170LC-11 | |
SANY SY215C | |
SANY SY225C | |
SANY SY265C | |
VOLVO EC160E | |
VOLVO EC220E | |
VOLVO ECR235E |
MX960R/C950
CATERPILLAR M314 | |
DOOSAN DX180LC-5 | |
HITACHI ZX180LC-6 | |
HITACHI ZX210-6 | |
KOMATSU PC170LC-11 | |
SANY SY215C | |
SANY SY225C | |
SANY SY265C | |
VOLVO EC160E | |
VOLVO EC220E | |
VOLVO ECR235E |