Baumalight
BAUMALIGHT MX948R/D97X2 MULCHER 2 SPEED MOTOR OPTION 24,000LBS-60,000LBS 40-50GPM 48" WORKING WIDTH For Excavator
BAUMALIGHT MX948R/D97X2 MULCHER 2 SPEED MOTOR OPTION 24,000LBS-60,000LBS 40-50GPM 48" WORKING WIDTH For Excavator
Couldn't load pickup availability
DESCRIPTION
| MX948R (WITH A MOUNT AND PINS) NO HOSES PROVIDED **CASE DRAIN REQUIRED** 2 SPEED MOTOR OPTION | |
| The Baumalight MX948R Brush Mulcher has a 60” rotor and is designed for excavators starting at 12 ton up to 30 tons. The MX948R uses a fixed tooth holder comes with heavy duty double carbit tipped teeth (R9000), these teeth are ideal for vegetation management with lots of ground contact and don’t mind the occasional stone. Powered by a piston motor like all of the larger Baumalight mulchers the MX948R comes with aggressive root rake ripper teeth build into the frame to rip out rocks and move logs. The unit also has a heavier duty body, built with a low-weight, high-strength AR400 steel and is equipped with replaceable body wear plates. |
SPECIFICATION
| Part #: | MX948R/D97X2 |
| Mfg: | BAUMALIGHT |
| Category: | EXCAVATOR ATTACHMENTS |
| SubCategory: | MULCHER EXCAVATOR 35,000LBS-66,000LBS |
| Industry: | CONSTRUCTION |
| Machine Size: | 24,000LBS-60,000LBS 40-50GPM |
| Attachment Size: | 48" CUTTING WIDTH |
| Part #: | MX948R/C950 |
| Mfg: | BAUMALIGHT |
| Category: | EXCAVATOR ATTACHMENTS |
| SubCategory: | MULCHER EXCAVATOR 35,000LBS-66,000LBS |
| Industry: | CONSTRUCTION |
| Machine Size: | 24,000LBS-60,000LBS 33-40GPM |
| Attachment Size: | 48" CUTTING WIDTH |
| Part #: | MX948R/C940 |
| Mfg: | BAUMALIGHT |
| Category: | EXCAVATOR ATTACHMENTS |
| SubCategory: | MULCHER EXCAVATOR 35,000LBS-66,000LBS |
| Industry: | CONSTRUCTION |
| Machine Size: | 24,000LBS-60,000LBS 27-35GPM |
| Attachment Size: | 48" CUTTING WIDTH |
FEATURES
|
REPLACEABLE BOLT-IN LINER Save time by easily replacing the AR400 steel wear plates on the MX960R without needing to remove the rotor.
|
|
ADJUSTABLE BELT TENSIONER The adjustable belt tensioner ensures the proper tension of your belts, with no extra idler wheel that could wear out. Simply loosen the bolts and raise the motor mount to tighten the belt.
|
|
BENT AXIS PISTON MOTORS ARE A STANDARD OPTION Our industry leading bent axis piston motors make the most use of your hydraulic flow and pressure for your brush clearing needs.
|
|
WIRE PROTECTION KIT If you are mulching and you catch some old fence wire, it can really cause damage to the unit if the wire slips over the edge of the rotor and gets wrapped around the shaft. The wire can get bunched against the bearings, causing major damage. Our wire protection kit contains a welded raised area on the end of the rotor that protects the shaft and prevents wire from getting in.
|
|
CHAIN CURTAIN The rear of the unit is guarded by a 3/8” thick chain curtain so standing brush enters and mulched debris exits.
|
|
OVERTORQUE PROTECTION - RELIEF VALVE The relief valve protects the motor and the hydraulic system from pressure spikes. When an obstacle is hit the relief valves open and relieves the pressure.
|
|
REINFORCED BELT A heavy duty reinforced belt delivers the force from the gear box to the rotor. This offers protection from the shocks inherent in mulching. |
|
EASY ACCESS GREASE FITTINGS Reduce your regular maintenance time by easily greasing the bearings on the MX1160R from outside the frame. No tools required.
|
HOST MACHINE
MX948R/C950
| CATERPILLAR M314 |  |
| DOOSAN DX140LC-5 |  |
| DOOSAN DX140LCR-5 |  |
| DOOSAN DX170LC-5 |  |
| DOOSAN DX180LC-5 |  |
MX948R/C940
| BOBCAT E145 |  |
| BOBCAT E165 |  |
| DOOSAN DX140LC-5 | |
| DOOSAN DX140LCR-5 | |
| HITACHI ZX130-6 |  |
| SANY SY135U |  |
| SANY SY155U |  |
| VOLVO EC140E |  |
| VOLVO EC160E |  |
| VOLVO EC220E |  |
| VOLVO ECR145C |  |
