RAMMY ATV FLAIL MOWER 120" WITH WINCH AND UNIVERSAL SNOWPLOW MOUNT BRACKET

DESCRIPTION

The Rammy Flail Mower 120 is a front mount mower for cutting grass, hay, and brush up to 3/4″ diameter. It attaches to almost any ATV using a center mounted snowplow mount bracket.

To adjust the height of the Rammy, you move the rear roller and front casters on the mower. This allows you to adjust the height between 3/4″ and 4″ but additional adjustment is possible via the winch on your ATV.

IMPORTANT: Mounting varies based on brand and model of ATV/UTV and the mounting bracket used on your machine. We cannot guarantee that the Rammy will mount without needing to make modifications to your ATV/UTV’s mounting bracket or front panel.

The Rammy Flail Mower mounts to your ATV/UTV using a snowplow mount bracket. You also need a winch to raise and lower the Rammy. The Rammy subframe (included with the Rammy) connects to the snowplow mount bracket with 10 mm pins. Make sure these pins fit properly when mounting the Rammy. If they are loose fitting, it can cause damage to the subframe during use.

If your machine has mounting posts that are .625-.75 inches (16-19 mm) in diameter, you have the option of using the Rammy Lock Hook Set.

For machines with light suspensions, you can tighten your front springs (if adjustable), as well as your front tire pressures, to help alleviate the extra weight on the suspension. You may also benefit from having heavy-duty springs or spring inserts installed. We always recommend using about 100 lb of ballast weight on the rear rack of your ATV, to offset the added weight of the Rammy.

The Rammy’s standard mounting system uses two 10 mm pins, which connect the subframe / push tubes to the mounting bracket on your ATV/UTV. These need to be used with a 10 mm clearance pinhole on the mounting bracket. Using these pins in a hole that is not designed for 10 mm pins (i.e. too large, or too small), can and will cause damage to the subframe. This may lead to further damage to the Rammy and/or your ATV/UTV.

If your bracket/mounting system is not compatible with the 10 mm pins, the Rammy Lock Hook set is an alternative option for mounting.

Rammy mowers are manufactured in Finland and are made with quality and efficiency in mind. As a front mount ATV flail mower, you don’t flatten the grass, or brush, before mowing. This gives you a better and more consistent cut.

We also offer the Rammy ATV Lawn Mower and the Rammy ATV Brush Cutter, which are designed to handle different jobs.

Metsa Machines does not carry spare parts for engines. Briggs & Stratton warranty and repair work would be handled by your local Briggs & Stratton service center.

We stay stocked on spare parts for all Rammy machines at our warehouse in Wisconsin. If you have service questions, need after sales support, or would like to order spare parts, please contact the dealer you purchased your machine from.

SPECIFICATIONS

• Mowing Width: 47.25 inches
  
• Mowing Capabilities: Grass, Hay, and Brush up to 3/4" Diameter
  
• Cutting System: 44 Y-Blades
  
• Mowing Height: Adjustable from 3/4" to 4"
  
• ATV Requirements: Winch and Universal Snowplow Mount Bracket
  
• Engine: Briggs & Stratton 306cc
  
• Warranty: 1 Year
  
• Brand: Rammy

OPTIONS

An optional $349.99 side shift kit is available. With it, the flail mower can be shifted almost 15 inches (38.1 cm) to the left of center. This is great for mowing fence rows or any other place that you’d want the mower further left of the tires on your ATV.

The flail mower comes standard with 44 Y-blades, which are designed for rough cut. The 44 blades mount in pairs in 22 locations to form a Y shape. However, there is an optional $449.99 hammer blade set, which is intended for finish cutting. This set consists of 22 blades, that are wider with a long flat edge.