Couldn't load pickup availability
Couldn't load pickup availability
The Sony Airpeak S1 Drone redefines aerial creativity and industrial performance. Designed for professionals, this compact yet powerful drone supports Sony Alpha mirrorless cameras for unmatched image quality. With a top speed of 55.9 mph and advanced RTK capabilities, the Airpeak S1 offers precision, stability, and reliability.
Key features include intelligent obstacle avoidance, automated flight planning through Airpeak Base, and real-time camera and gimbal control via Airpeak Flight mobile app. The Airpeak S1 is equipped with a robust propulsion system, enabling high-speed performance and resistance to winds up to 44.7 mph. Whether for creative filmmaking, industrial inspections, or precision mapping, the Airpeak S1 is your ultimate aerial companion.
POWERFUL AND FAST PERFORMANCE
The lightweight frame and quad 17" propellers of the Airpeak S1 help it achieve up to 22 minutes of flight time without payload (approximately 12 minutes with payload). Add in high-powered brushless motors, and the Airpeak S1 can move with exceptional speed. This optimized propulsion system can accelerate through shots and reach waypoints at up to 55.9 mph (without payload) and a 0 to 50 mph acceleration of just 3.5 seconds.
AIRPEAK BASE
Airpeak Base is a web-based app for overall drone project management, primarily providing automated flight planning and flight log storage. Airpeak Base can be implemented with just one Airpeak S1 or a fleet of them. Some management features include reviewing equipment status and usage logs, downloading flight logs from the drone, and setting up error warnings and maintenance reminders.
Separate accounts can be created to increase information security and accountability in aircraft usage. Being a web-based app, all data is conveniently stored in the cloud, so team members can access them from any location. It also helps Sony's Airpeak S1 customer support team to more efficiently provide problem resolution.
Mission Flight mode utilizes the Projects section of Airpeak Base to let you create automated flight plans that can be created for execution by the pilot with the Airpeak Flight mobile app. You can set the drone's speed and position (latitude, longitude, and altitude) along a timeline, along with the gimbal direction and timing of image and video capture. This mode can be saved and run repeatedly, just like a camera on rails when you're on the ground.
Repeat Flight mode accurately recreates old flight paths from flight logs, including gimbal and camera movement. In both Mission Flight and Repeat Flight modes, pilots maintain manual control to tweak the route and settings in the moment.
AIRPEAK FLIGHT
Airpeak Flight is a mobile app that runs on your optional Apple iPhone or iPad (iOS/iPadOS 14 or higher), giving you aircraft, remote, camera, and gimbal control. While in flight, you can check flight distance, battery usage, and other telemetry. Airpeak Flight can also be used to confirm and execute automated flight plans created by Airpeak Base in Mission Flight mode. During automated flights in Mission Flight mode, pilots retain control of the gimbal and camera, can check aircraft status, monitor equipment, and view a live feed from the nose-mounted FPV camera.
VISION SENSING SYSTEM
The flight control system and ESC (Electronic Speed Control) integrates the propulsion and various sensing metrics, such as IMU (Inertial Measurement Unit), direction, barometric pressure, and infrared ranging. In addition to the five stereo cameras (front, back, left, right, and bottom) and two IR range sensors, the S1 can accurately determine its spatial position and orientation in real time.
This ability allows for reduced camera shake during low-level flying, and it is essential for automatic obstacle avoidance in dense areas or when GNSS reception is not available. If an obstacle is detected, the S1 can enable the obstacle braking function, which auto-decelerates or stops the aircraft if needed. Obstacle braking can also be manually triggered if needed.
FLIGHT MODES
Standard Mode: Ensures all sensors and obstacle detection are on
Velocity Mode: Reduces effects of wind on hovering, turning, and maneuvering
On Course Function: Pilots can accomplish accurate recreations of circular flight paths
All Modes: You can customize maximum speed, angles, acceleration rates, and other parameters
Automatic Return to Home
When the battery is low or the remote controller signal is lost, the Return to Home (RTH) feature automatically brings the drone back to its starting point. If obstacles are in the way of a straight flight, the aircraft will intelligently calculate an alternate route. Pilots can also conveniently trigger RTH at the end of a shoot to free them from piloting the aircraft home.
SELF-DIAGNOSTICS
The Airpeak S1 automatically runs a full system check before starting its motor, alerting you to any possible issues and restricting takeoff and landing if these issues are too severe. Self-diagnostics can also be done while in flight, letting pilots know of any issue so they can make an emergency landing if necessary.
REMOTE CONTROLLER
The included remote controller provides real-time control over the Airpeak S1 and the optional gimbal. Piloting is done via the twin Futaba-designed control sticks and various aircraft, gimbal, and camera buttons, which can be changed if needed. In addition to that, four customizable buttons can be set to actions that reflect your specific piloting needs. A mobile device holder on the remote can open up to 7" to accommodate either an Apple iPhone or iPad. To allow for external drone footage monitoring by a product team, use the built-in HDMI port to output video to an optional monitor.
World’s smallest drone that can carry a full frame Alpha series mirrorless camera*
* The installed gimbal, camera, and lens are sold separately. Use with camera systems (lens filter, hood etc.) weighing under 1.1kg
Advanced drone technology to inspire creators to new heights. The sky is your canvas. Let your creativity soar.
The Airpeak system enhances creativity for a seamless drone experience, Airpeak S1 is supported by a remote controller, an app and cloud service which work together to create a high-performance aircraft system. From piloting and camera work to flight programming and data management, the Airpeak system is comprehensive and easy to use.
With a max speed of 55.9mph (25m/s)*, maximum angular velocity of 180°/s* and attitude angle up to 55°*, Airpeak S1 offers incredible creative freedom for dynamic professional aerial imagery.
* no payload, obstacle brake function disabled
Airpeak S1’s propulsion system is designed by Sony engineers to achieve maximum flight performance and energy efficiency. The powerful yet lightweight brushless motor optimises 17-inch propellers for maximum power and minimum energy loss, and the Electric Speed Controller (ESC) is carefully designed to regulate the whole system for peak efficiency. By integrating this propulsion system to the information from the sensors, it realises increased stability and highly responsive flight control.
The propellers, motor and ESC that make up the flight propulsion system, combined with the dedicated remote controller achieve optimal wind resistance. Airpeak S1 can withstand wind speeds as high as 44.7mph (20m/s)*, and can maintain stable flight in erratic upper-level winds and strong low-level canyon and coastal winds.
* no payload
Airpeak S1 has a maximum flight time of 22 minutes*1 without a payload, and can still maintain flight for up to 12 minutes*1 when fitted with a heavy payload like the α7S III and FE 24mm F1.4 GM. The hot-swappable battery allows for power supply exchange*2 without powering down the aircraft for minimal downtime.
*1 Without payload, obstacle brake disabled
*2 Vision Positioning disabled
Airpeak S1 is fitted with a landing gear with open/close legs in-flight, allowing the gimbal to pan without worrying about them appearing into images.
The propellors are light, compact, and exceptionally durable, and the quick release mechanism makes for easy attachment and removal.
Equipped with Sony’s image sensor 5-way stereo cameras (front, back, left, right, down), visual information is fed to the high-speed Vision Sensing Processor and proprietary algorithm. By integrating this information to IMU (Inertial Measurement Unit), compass, barometric pressure, and infrared range sensors, Airpeak S1 perceive its real-time location and positioning with incredible precision, even in enclosed spaces or when out of range of GNSS (Global Navigation Satellite System), to ensure a stable flight.
High-precision sensors and the refined flight algorithm enable Airpeak S1 to accurately determine its environment, location, and positioning and keep low-level flight shake to a minimum. Airpeak S1 can fly smoothly and safely through wooded and obstacle heavy areas, for steady shooting even in the most demanding close ups.
Airpeak S1 combines five directional stereo cameras with infrared range sensor for optimal obstacle avoidance. The automatic deceleration and braking functions allow it to intuitively respond to the environment and its situation. The “obstacle brake function” can be enabled in both automated and manual modes, and there is the option to restrict sensing to a specific direction, or disable the braking function altogether.
With a custom-designed powerful motor and compact frame, Airpeak S1 is capable of carrying a camera system (including gimbal) of up to 5.5lbs (2.5 kg). Fully compatible with Alpha series full-frame mirrorless cameras, Airpeak S1 opens up the possibilities for professional creators.
With Airpeak S1, the camera can be controlled from the remote controller. The user can check and change camera settings at-a-glance. With the latest system update, more settings such as focus area settings can be controlled and focus point can be selected by tapping the screen.*
* Compatible settings vary depending on the camera model. Refer to compatibility section in specifications for more details.
Airpeak S1 is compatible with a huge range of cameras and lenses, allowing creators to choose the perfect setup for their needs. Powerful low-light cameras like the α7S series or FX3 leverage high sensitivity with stability to capture vivid images even in dark conditions. High-resolution cameras like the α7R series can achieve aerial imagery of outstanding quality, with huge potential for commercial and industrial applications. α9 series will capture high quality images with ultimately low distortion, and α１ can shoot in the air with 8K quality. For lenses, Airpeak S1 is compatible with select E-mount lenses. You can match the best model for your application.
As a dedicated accessory for Airpeak S1, there are two Gremsy gimbals available; “T3 for Airpeak” and “PX1 for Airpeak” that are compatible with Alpha series cameras. Once the gimbal is connected, the quick release mechanism allows for easy attachment. And the temperature controlled IMU allows for accurate control of the gimbal in any temperature.*
* Gremsy gimbal parameters may need to be calibrated when using certain camera and lens setups.
Developed for professionals in mind, the remote controller combines superior functionality with a comfortable design. It allows for a live view during the flight and real-time control over the aircraft and gimbal. There are four customisable buttons, and the aircraft, camera, and gimbal buttons can be changed according to requirements. It is also designed to fit comfortably in the hand.
The holder allows for a maximum of 178.5 mm making it compatible with smartphones and tablets.
The grip is shaped for secure handling, and the control stick is based on a design by the Futaba Corporation, popular with drone pilots.
It also has an HDMI port for connecting to an external screen.
“Airpeak Flight” is a mobile app for comprehensive monitoring and management of the aircraft, remote controller, camera, and gimbal. From checking flight distance and battery usage, to adjusting camera settings, the app is designed to optimise the flight experience. Airpeak Flight is fully compatible with Alpha full-frame mirrorless cameras, allowing for camera adjustments during flight. “Airpeak Flight” can be used both with manual and automated flight modes. During the “Mission Flight mode”, the app can be used to confirm the route, execute the mission, check the status of the aircraft, and monitor the equipment.
The “Dual Operation Mode” allows two operators to control the aircraft and gimbal/camera separately, allowing for more precision control in complex shooting conditions. By placing the FPV camera on the nose of the aircraft, the pilot can control FPV tilt and check the flight direction and angle, while the camera operator continues capturing images. In addition, when two operators are using the remote controllers, the control stick and buttons will automatically be assigned to the pilot and camera operator accordingly.
Airpeak S1 is equipped with several different flight modes to make flying and creating even easier. The default Velocity Mode was developed in-house. This mode differs from a regular Position Mode by reducing the effects of wind and external influences on hovering, turning and manoeuvring, making it easier to recreate flight routes with more accuracy. By enabling “On Course Function”, the pilot can accomplish accurate and flawless recreation of a circular flight path with ease. Each flight mode allows for customisation of maximum speeds, angles, acceleration rates and other parameters. Whether for speed and power, or smooth and steady, pilots will be able to find the flight mode to support optimal performance. Airpeak S1 also comes with Standard Mode which all sensors including obstacle detection is turned on as default for a safe and stable flight experience.
“Airpeak Base” is a web app used to efficiently organise drone projects, from flight planning and flight log organisation, to reviewing equipment status and usage. Use the app to plan a detailed flight route, download flight logs from the aircraft to view data on past flights, or create a new flight plan from past flight logs. “Airpeak Base” can also be used to view the equipment status and usage logs, and set up error warnings and maintenance reminders, to reduce the risk of unexpected problems on site. Your flight logs can only be viewed and managed on your account ensuring data privacy and security.
“Airpeak Base” is optimised to support professional creators in designing sophisticated flight plans with ease. With the “Mission Flight mode”, you can set the aircraft’s speed and position (latitude, longitude, altitude) along with the timeline, and also specify the direction of the gimbal and the timing of camera for both video and still image capture. This is not only for straight paths, but for curved routes as well. The aircraft can be programmed to repeat the same path and can recreate the route with flawless accuracy every time.
“Repeat Flight mode” enables re-creation of a flight path from a previous log, including gimbal and camera movement and camera shooting timing for both still images and movies**, ideal for continuous shooting of a fixed point or when accurately reproducing the same flight path multiple times. Manual control is enabled during Mission Flight and Repeat Flight, allowing pilots to tweak the route or change the angle of the gimbal during flight.
** System software version 2.1.0 / Airpeak Flight version 2.2.0 or more are needed
“Return to Home (RTH)” will automatically activate if the battery is low or the signal is lost, bringing the aircraft safely back to the home point. If the return route has restricted airspace or obstacles, the aircraft can automatically calculate a bypass route. Either Basic or Advanced setting can be chosen. Basic can avoid obstacles upward, while Advanced can also avoid obstacles horizontally for more efficient flight*. The “Return to Home” feature is also convenient to bring the aircraft safely back to the home point at the end of an aerial imagery project.
* Requires system software version 2.1.0 and Airpeak Flight version 2.2.0 or newer.
Airpeak S1 automatically runs a full system check before starting the motor. It will alert the pilot to any possible issues, and restrict take-off and landing if necessary. Airpeak S1 is also capable of self-checks during flight, and can immediately notify the pilot if there is an issue, and make an emergency landing when required.
Aircraft data is shared to the cloud and can be viewed in “Airpeak Base”. Status information from multiple aircrafts can be checked in one location ensuring more efficient flight preparation and planning. “Airpeak Base” also stores past flight logs so that error data can be checked after the event. And as customer support for Airpeak S1 is coordinated with the cloud, uploading data from flight logs can enable efficient and quick problem resolution.
HxGN SmartNet is the world’s largest Global Navigation Satellite System (GNSS) correction service, providing data from over 5,300 reference stations worldwide. Reliable coverage empowers you to seamlessly integrate accurate positioning data into your workflow
.
Pix4D is a market leader in photogrammetry software technology. Pix4D products enable you to digitize reality and measure from images taken from your Airpeak UAV or any other Sony camera. Pix4D revolutionizes photogrammetry, so you can scale up and unleash the power of your imagery.
AirData UAV is the largest online drone fleet data management and real-time flight streaming platform. Serving over 311,000 users with more than 36 million flights uploaded to date and counting, we process an average of 25,000 flights a day with high-resolution data stored per each flight. It is used by large fleet operators around the world not only as a logbook, but also as a comprehensive flight safety data analysis and crash prevention platform, with advanced maintenance, pilot tracking, and easy-to-use live streaming.
DroneLogbook provides enterprise grade software to manage commercial drone operations. DroneLogbook’s platform manages personnel currency, provides fleet management, helps you plan and document missions and flights. DroneLogbook integrates 80+ telemetry (flight log) types to maintain detailed, accurate data on every aspect of your drone operations. We also offer private/white label versions with extensive admin functionaity for more complex operations.
| Feature | Details |
|---|---|
| Dimensions | 20.75" H x 23.38" W x 20.25" D (without propellers) |
| Diagonal Wheelbase | Approx. 25.5 inches |
| Weight | 6 lbs 14.9 oz (main unit only) |
| Max Payload | 5 lbs 9.4 oz |
| Max Speed | 55.9 mph |
| Flight Time | 22 minutes (no payload), 12 minutes (full payload) |
| GNSS | Dual-band GPS, GLONASS, and RTK |
| Obstacle Avoidance | 5 stereo cameras, infrared range sensors |
| Operating Temperature | 14°F to 104°F |
| Propeller Size | 17 inches |
| Camera Compatibility | Supports Sony Alpha series cameras |
| Gimbal Compatibility | GBL-T3 and GBL-PX1 Gremsy Gimbals |
| Dimension | Measurement |
|---|---|
| Main unit only | Approx. 20.75(H) x 23.38(W) x 20.25(D) inches*¹ *² |
| With RTK kit attached to the aircraft | Approx. 21.25(H) x 23.38(W) x 20.25(D) inches*¹ *² |
| Note | *¹ Landing position, without propellers ² Approx. 39.88(W) inches (Landing gear is up) |
| Description | Measurement |
|---|---|
| Without propellers | Approx. 25.5 inches |
| Description | Weight |
|---|---|
| Aircraft Weight (Main unit only)* | Approx. 6 lb 14.9 oz |
| With RTK kit and gimbals attached* | Approx. 7 lb 7.2 oz (GBL-T3 gimbal), Approx. 7 lb 6.9 oz (GBL-PX1 gimbal) |
| Note | Without battery packs |
| Description | Weight |
|---|---|
| Max Payload | Approx. 5 lb 9.4 oz |
| Max Takeoff Weight | LBP-HS1: Approx. 15 lb 5.7 oz LBP-HM1: Approx. 16 lb 7.0 oz |
| Parameter | Specification |
|---|---|
| Max Speed | 25 m/s (55.9 mph) without payload, obstacle brake disabled |
| Max Ascent Speed | 7 m/s (without payload, obstacle brake disabled) |
| Max Descent Speed | 4 m/s (without payload, obstacle brake disabled) |
| Acceleration | Approx. 3.5 seconds (0–49.7 mph, without payload) |
| Max Angular Velocity | Pitch/Yaw/Roll: 180°/s (Vision Positioning disabled) |
| Max Pitch Angle | 55° (Obstacle brake disabled), 35° (Obstacle brake enabled) |
| Parameter | Specification |
|---|---|
| Max Wind Resistance | 20 m/s (44.7 mph) without payload |
| Max Gust Resistance* | 15 m/s (33.6 mph) with maximum payload |
| Max Service Ceiling | 8,202 ft (Above Sea Level) |
| Operating Temperature | 14–104 ℉ |
| Condition | Duration |
|---|---|
| Battery Pack LBP-HM1 | |
| Without Payload | Approx. 30 minutes |
| With RTK-1, GBL-PX1, ILCE-7RM4A, SEL35F28Z | Approx. 20 minutes |
| With Maximum Payload | Approx. 16 minutes |
| Battery Pack LBP-HS1 | |
| Without Payload | Approx. 22 minutes |
| With Maximum Payload | Approx. 12 minutes |
| Condition | Accuracy Range |
|---|---|
| RTK kit attached | Vertical: ±0.3 ft, Horizontal: ±0.3 ft (RTK and Vision Positioning enabled) |
| Main unit only | Vertical: ±0.3 ft, Horizontal: ±1.6 ft |
| Parameter | Specification |
|---|---|
| Operating Frequency | 2.4–2.4835 GHz, 5.15–5.25 GHz, 5.725–5.82 GHz |
| EIRP | 2.4 GHz: 23.8 dBm, 5.15 GHz: 18 dBm, 5.725 GHz: 25.6 dBm |
| Max Transmitting Distance | 2.4 GHz: 1.2 miles 5.15 GHz: 0.6 miles 5.725 GHz: 1.2 miles |
| Model | Size |
|---|---|
| PPL1785 | 17 inches |
| Position | Description |
|---|---|
| Landing Gear | Raise and lower |
| Sensor | Description |
|---|---|
| Vision Sensor | Stereo camera, Sensing Range: 1.6–177.2 ft, HFOV/VFOV: 80° |
| Infrared Sensor | Range: 0.3–9.8 ft, FOV ±15° |
| Parameter | Specification |
|---|---|
| Image Sensor | 1/4 inch 8.17 Mpx CMOS Sensor |
| Max Frame Rate | 30 fps |
| FOV | DFOV 120° |
Overall rating: 4.6 / 5 from 99 reviews.
I've started using the mulcher I on several parcels of land 10 acres . I have grind down a couple of 14 inch stumps. Caution the mount bracket behind the mulcher motor exhaust gets extremely hot even with gloves on . But the unit so far seems to works very good it's well put together.
Forax Gas Powered Mulcher | Model GP40 | 40" Cutting Width | 14HP Kohler | For Tractors
The Firminator G3 is s heavy duty quality machine. The discs worked extremely well and planting and culti-packing is very smooth and easy. Working with Dillon at Ripping It Outdoors was a very good experience and seamless transaction.
Product was fairly priced and they delivered it quickly.
Pulls 100% better no sway and puts tongue weight over the axle
BP Conversions Bumper Puller Ball Hitch to Gooseneck Conversion System
Great machine. Working with Dillon was awesome. Even made me a custom mount for my Polaris.
Just got my Buffalo Turbine! Love it. Took a little bit to get used to getting the right angle for the nozzle, but not a problem. Side note, works much better if the frame is level as much as possible. Love it! Gary Haddock
Seems to be in order delivery wasn't able to use lift gate but tractor was able to take pallet off the truck bed. No damage to machine after visual check. won't know how it runs until rain stops. Staff at RippingitOutdoors was very quick to call and double check the type of backet needed for the unit to ensure the online order matched( to fit my skid steer quick attachment on my l2501 Kubota). Explained the teeth & belt could be ordered through them directly over the phone when/if needed as well as selling other types of custom made brackets for Utv's ect. All around Great customer service and would purchase from again.
Forax Gas Powered Mulcher | Model GP40 | 40" Cutting Width | 14-15 HP | For Tractors
Great device. Makes my property look good.
The machine is a Land Shark! Gobbled up brush and small trees and turned them into mulch in no time!
Forax Gas Powered Mulcher | Model GP40 | 40" Cutting Width | 14-15 HP | For Tractors
The unit arrived within the timeframe that was given. It’s an amazing implement. Would definitely recommend
Forax Gas Powered Mulcher | Model GP40 | 40" Cutting Width | 14HP Kohler | For Tractors
Hay rake works great. It’s a good value for the money. Ripping it outdoors was beyond helpful during the purchase!
Farm-Maxx Rotary Hay Rake | Model FRM-280 | Working Width 110" | 20+ HP | For Tractors
After spending way to much money for forest mulching services I discovered this wonderful machine. It's not a giant powerhouse forest mulcher, but it does everything a property owner needs to maintain a forested property. I wish I would have found it sooner.
Forax Gas Powered Mulcher | Model GP40 | 40" Cutting Width | 14HP Kohler | For Tractor
I wasn't sure what to expect, but it has proven to be a strong, durable, and terribly useful tool for clearing what I needed to clear. Thank you!
Works great and its easy to use.
Forax Gas Powered Mulcher | Model GP40 | 40" Cutting Width | 14HP Kohler | For Tractors
Love it . Now I am going to have to get a new tractor and a Lane Shark.
Baumalight MP330 Brush Mulcher | Cutting Path 30" | 15-40 HP | For PTO On Tractors
The Firminator is well built and functions well. I am having some trouble while planting mixed size seeds. Next time out I’ll try setting it so only the smaller seeds drop out the open it up for the larger seeds.
easy buying process and great communication. Mulcher works great, easily clears overgrown brush and even mulched a 5" thick mulberry tree fairly easily. running it off of my old 331 bobcat with no problem powering the drum at all. Only small issue which isn't a big deal is that the supplied hoses are about 16" too short to operate a full range of motion.
The Firmanator works great very well built .I am very happy I made this purchase.
This trap seems to be kinda hard to set off.
Works excellent and is very well made.
Over all built well. I like it is all cast iron and metal and not plastic. Had to modify fertilizer disc mount to fit correctly, nothing major, a little grinding. I modified the center link hitch point to accommodate my John Deere quick hitch. Have yet to plant with it but I’m sure it will work perfect. Love the grease fittings everywhere. Reminds me of the old farm equipment I grew up on, and still use periodically.
My firminator RT was delivered in good condition in ND. I will be using it next week. I have a 45 HP John Deere tractor that is supposed to lift 2000 lb but really struggles to lift this 6 foot firminator RT. I will just have to use in as a two pass operation for now. I do wish there was a better operating manual for this unit. Maybe that is something you can work on. I will give you an update once I start using it in a few days.
Great piece of equipment. Performs far better than I expected. One piece of advice - if property is significantly overgrown, consider the tractor attachment first to bring down the over growth and then switch to the UTV attachment to maintain property. No complaints worked perfectly.
Ordered a 36” clean out bucket for my mini excavator. Love it, welds are great. Works as it should.
Showed up on time and I will be using it to put in 15 acres of food plots in this weekend!
Great experience. Easy transaction and fast shipping. The blade is built well and heavy duty.
good experience
Farm-Maxx Snow-Blowers | FSNB Series | Working Width 54", 68" & 74" | 15-50 HP | For Tractors
Very smooth experience fantastic Equipment delivered on time, actually ahead of time. Great product looking forward to the results.
Warranty protection need to be better it’s a joke I will not recommend
Baumalight MP560 Brush Mulcher | Cutting Width 60" | Up to 75 HP | For PTO On Tractors
A good product !
Field Tuff 125 lb. Receiver Mount Spreader – 12V | Towing Power 15–25 HP | For ATVs, UTVs & Tractor
Looks great will use it this weekend
CL Fabrication Adapters | Multiple Styles | Universal Compatibility | Heavy-Duty Construction
Put this on Kubota 900 with winch hookup. This thing is a beast (within reason). I named it ‘Homie”, cause Homie don’t play. It will take care of stuff up to about 2” in diameter. You still have to remember that this is NOT like the ones on a bobcat or larger machinery. It does have its limits. But all in all I am very satisfied with it. Now on to the good part! The staff at Ripping It are outstanding! Especially Kayla in the office. She has gone above and beyond on making sure everything went right, from ordering to questions about installation. This young lady would be of great value at ANY company ! Her knowledge and personality are like over the top. This is my first experience with Ripping It Outdoors and I can only say positive things about them. With all that being said, I do fill out reviews on things I buy, AND I give a honest review. If it’s bad then you will know it. But if it’s good, well I tell the truth ! Again Kayla, from the bottom of my heart, a great big THANK YOU for all your help and just talking to you. I feel like we’ve know each other for years!
First Class communication and perfect delivery with great communication and fast. The equipment was excellent
TENT is easy to put up , material is tuff as told....only complaint is that i wish the bottom had about 3 to 4 inches overlap towards the inside so i could install a 2 x4 or something to help hold the tent down in high winds we have here in virginia thanks
Great product. Works very well in our arena and round pen.
Love it Well worth the money. Dillon did a great job well pleased
Ranew Outdoors Firmiseeder | Width 4', 5', 6' & 8' | Horsepower 25–75 HP | For Tractors
Hi, my name is Ken. I’ve had a great experience with Ripping It Outdoors. I purchased a Forax Hp40 Mulcher for my mini excavator. Kayla Patterson is who I dealt with from the beginning until I received it at my house. She has been wonderful to work with and looking forward to working with her with any other orders I purchase. Kayla answered any questions I had and kept me updated throughout the whole process, can’t say it enough just a wonderful person to work with!!
Forax Ultralight Mulcher | Model HP40 | Cutting Width 40" | Carrier 2-4-Ton | For Excavators
These are great feeders if you don’t have any feral hogs but if the hogs tear off the wiring harness from the timer to the feeder motor, you’re disabled. Then, if you ask for help from Outback, they refer you to the dealer but really you’re on your own for parts and repairs. I have three Outback feeders that work as designed. They’re 13 years old and have always served well but this feeder misses the mark by a very high margin. I’d NEVER buy this product again. Feeders need to be dependable and this unit is not.
Heavy duty , solid construction, exactly what I wanted and expected. Thank you
Hoelscher Inc. 4', 5', 6' & 8' Land Smooth Roller Pull Type | 25-50 HP | For Tractor
This is my first experience with Ripping It Outdoors. Fortunately I got Dillion as a representative and everything from sales to shipping was spot on.. Thanks Dillion for your help!!
Industrias America Header Trailer | Model 440 | Length 40' | Pull Type
