1 25

Baumalight

Baumalight High Flow Stump Grinder | Model S40/S770 | SSL 22GPM - 47GPM | For Skid Steer

Baumalight High Flow Stump Grinder | Model S40/S770 | SSL 22GPM - 47GPM | For Skid Steer

$14,368.00
$14,368.00
Sale Sold out
Customizable
Fast
24/7 Support
  • Hydraulic Flow Range: Operates efficiently between 22 GPM and 47 GPM, maximizing hydraulic power for stump grinding.
  • Cutting Depth: Capable of cutting stumps up to 15 inches below ground for thorough stump removal.
  • Wide Swing Arc: Features a 63-degree swing arc for increased coverage and maneuverability during operation.
  • High Torque Performance: Equipped with a high-torque gearbox that enhances efficiency and effectiveness in stump grinding.
  • Adjustable Cutting Height: Allows customization of cutting heights above ground for various stump sizes and ground conditions.
View full details

Product Description

Baumalight High Flow Stump Grinder | Model S40/S770 | SSL 22GPM - 47GPM | For Skid Steer

DESCRIPTION

S40/S770

STUMP GRINDER COMMERCIAL CASE DRAIN REQUIREDMUST SPECIFY WIRE HARNESS

High Performance Skid Steer Stump Grinder - S40 The S40 stump grinder is mounted with a bent axis piston motor. By matching a motor to your skid steers hydraulic flow these high efficiency motors make the most hydraulic power transforming it into the highest available stump grinding performance. Stocked with 20 carbide Green teeth the massive 1.25” thick steel rotor provides the back bone for the Skidsteer mounted stump grinder. The high number of teeth means that each tooth needs to do less work. Each tooth only needs to make a small cut, because the work is shared by more of these green teeth, which last longer and typically only need 2 or 3 replaced at a time. The bolt-on designed teeth allow for straightforward replacement. The teeth can also be rotated up to 3 times to provide a renewed cutting surface even in the field. The extra-large Blast shield is designed with dual rows of chain curtains to contain and control chips during grinding. The Blast shield is hinged to give the best protection and chip control throughout the grinding process. This hinge also allows the shield to be raised to get into tight areas and for easy access to the rotor and teeth.

S40/S770/D006386
STUMP GRINDER COMMERCIAL**CASE DRAIN REQUIRED**(Bobcat 7-pin CANBUS plug for Bobcat Skidsteers)
High Performance Skid Steer Stump Grinder - S40 The S40 stump grinder is mounted with a bent axis piston motor. By matching a motor to your skid steers hydraulic flow these high efficiency motors make the most hydraulic power transforming it into the highest available stump grinding performance. Stocked with 20 carbide Green teeth the massive 1.25” thick steel rotor provides the back bone for the Skidsteer mounted stump grinder. The high number of teeth means that each tooth needs to do less work. Each tooth only needs to make a small cut, because the work is shared by more of these green teeth, which last longer and typically only need 2 or 3 replaced at a time. The bolt-on designed teeth allow for straightforward replacement. The teeth can also be rotated up to 3 times to provide a renewed cutting surface even in the field. The extra-large Blast shield is designed with dual rows of chain curtains to contain and control chips during grinding. The Blast shield is hinged to give the best protection and chip control throughout the grinding process. This hinge also allows the shield to be raised to get into tight areas and for easy access to the rotor and teeth. KEY FEATURES
S40/S740

STUMP GRINDER COMMERCIAL**CASE DRAIN REQUIRED

High Performance Skid Steer Stump Grinder - S40 The S40 stump grinder is mounted with a bent axis piston motor. By matching a motor to your skid steers hydraulic flow these high efficiency motors make the most hydraulic power transforming it into the highest available stump grinding performance. Stocked with 20 carbide Green teeth the massive 1.25” thick steel rotor provides the back bone for the Skidsteer mounted stump grinder. The high number of teeth means that each tooth needs to do less work. Each tooth only needs to make a small cut, because the work is shared by more of these green teeth, which last longer and typically only need 2 or 3 replaced at a time. The bolt-on designed teeth allow for straightforward replacement. The teeth can also be rotated up to 3 times to provide a renewed cutting surface even in the field. The extra-large Blast shield is designed with dual rows of chain curtains to contain and control chips during grinding. The Blast shield is hinged to give the best protection and chip control throughout the grinding process. This hinge also allows the shield to be raised to get into tight areas and for easy access to the rotor and teeth. KEY FEATURES

S40/S740/D006386
STUMP GRINDER COMMERCIAL CASE DRAIN REQUIRED (Bobcat 7-pin CANBUS plug for Bobcat Skidsteers)
High Performance Skid Steer Stump Grinder - S40 The S40 stump grinder is mounted with a bent axis piston motor. By matching a motor to your skid steers hydraulic flow these high efficiency motors make the most hydraulic power transforming it into the highest available stump grinding performance. Stocked with 20 carbide Green teeth the massive 1.25” thick steel rotor provides the back bone for the Skidsteer mounted stump grinder. The high number of teeth means that each tooth needs to do less work. Each tooth only needs to make a small cut, because the work is shared by more of these green teeth, which last longer and typically only need 2 or 3 replaced at a time. The bolt-on designed teeth allow for straightforward replacement. The teeth can also be rotated up to 3 times to provide a renewed cutting surface even in the field. The extra-large Blast shield is designed with dual rows of chain curtains to contain and control chips during grinding. The Blast shield is hinged to give the best protection and chip control throughout the grinding process. This hinge also allows the shield to be raised to get into tight areas and for easy access to the rotor and teeth. KEY FEATURES

S28-S645
STUMP GRINDER

The S28 skid steer stump grinder is designed for high flow and higher horsepower skid steers. Baumalight’s most powerful model, the S28 adds a high volume hydraulic motor and a gearbox that increases the torque to the cutting head giving you the best of precision, power and speed in your stump grinding. Cutting depth is up to 15" below ground with a swing radius of 63 degrees. The floating deflector safely directs the flow of debris for quick clean up. With it’s swing cylinder the S28 is a good choice for skidsteer stump grinding on close cut grass such as golf courses as well as for stump grinder rental on large skidsteers and track loaders. The high number of teeth means that each tooth needs to do less work. Each of the Stump Grinders teeth only need to make a small cut, because the work is shared by more of our rugged teeth they last longer and usually only require 2 or 3 replacements at a time.

The bolt-on designed teeth allow for straightforward replacement. The massive ¾" thick steel rotor provides the back bone for the Stump Grinder cutting system. It’s the anchor for the carbide tipped teeth. For smooth operation it’s important that the rotor remains solid, with no flexing. The rugged rotor also provides the Stump Grinder with the extra momentum needed when the grinding is tough, making sure the Stump Grinder can power through the hardest stumps. The Stump Grinder's carbide teeth extend a full 1-¼ inches from the rotor. This prevents chips and mulch from getting plugged. More chip clearing produces smoother operation and reduces heat build-up that can damage the rotor and cause premature tooth failure.

Key Features

The Baumalight High Flow Stump Grinder SSL 22GPM - 47GPM for Skid Steer:

  • Hydraulic Flow Range: Operates efficiently between 22 GPM and 47 GPM.

  • Powerful Cutting: Can cut stumps up to 15 inches below ground.

  • Wide Swing Arc: Features a 63-degree swing arc for better coverage.

  • High Torque: Provides high torque for efficient stump grinding.

  • Adjustable Cutting Height: Allows for customizable cutting heights above ground.

  • Durable Construction: Built with high-quality materials for long-lasting use.

  • Safety Features: Includes a chain curtain to contain debris and sleeved hydraulic hoses for operator protection.

  • System Protection: Comes with a built-in relief system to prevent over-torquing.

  • User-Friendly Design: Manual control system for easy operation.

  • Accessories: Includes free replacement teeth and a spare teeth holder

  • D004460 OPTIONAL HAND CONTROL

    Is one of your skidsteers older, without an auxiliary electrical connection? We also have an in-cab adapter to plug into your Aux Electrical Connected attachments that will allow you to run them. Plug the adapter into the attachment, connect it to 12V and now you can run your new attachment on an older skidsteer.

    D004460 optional hand control

    VISIBILITY

    Excellent Visibility from the operators seat.

    Visibility

    SWING ARM

    Dual swing cylinders for smoother, more controlled swing speed operation.

    Swing arm

    HOSE SHIELD

    Double shielded hoses for extra protection.

    Hose shield

    AUX PLUG IS STANDARD

    Baumalight now offers a more direct and simple way of connecting to your skid steer's auxiliary electrical connection. Simply connect the hydraulics and plug in the electrical. Now you can control the attachment from inside your cab.

    AUX

    BENT AXIS PISTON MOTOR

    Our industry leading bent axis piston motors make the most efficient use of your hydraulic flow and pressure for your stump grinding needs.

    Bent axis piston motor

    ROTOR

    The massive 1.25" thick steel rotor provides the back bone for the Holt Eraser stump grinder. It's the anchor of the carbide teeth.

    Rotor

    BLAST SHIELD

    Designed with an extra-large Blast shield with dual rows of chain curtains to contain and control chips during grinding. After grinding it also helps clean up giving you the ability to back fill without switching attachments.

    Blast shield

    FREE TEETH

    The S40 Stump Grinder comes with 3 free replacement teeth and 1 extra teeth holder. These replacement teeth can be conveniently stored in the spare tool compartment.

    Free Teeth

    HIGH SPEED TEETH

    The concave shaped carbide tip of our High Speed Teeth provide aggressive cutting action by chipping the brush bit by bit. This round tooth is 3 teeth in 1. Simply loosen the lock nut and rotate the tooth to a fresh, sharp cutting edge. This can be done three times, extending the life of each tooth.

    High speed teeth
    .

Host Machines

Left ArrowS40/S770 

ASV RT 135 HIGH FLOW

ASV RT120 HIGH FLOW

ASV RT75 HIGH FLOW

BOBCAT T770 HIGH FLOW

BOBCAT T870 HIGH FLOW

CASE TR340 ENHANCED HIGH FLOW

CASE TV370 HIGH FLOW

CASE TV450 ENHANCED HIGH FLOW

CATERPILLAR 299 D3 XE

CATERPILLAR 299 HIGH FLOW

JOHN DEERE 333G HIGH FLOW

KUBOTA SVL90 HIGH FLOW

KUBOTA SVL95 HIGH FLOW

KUBOTA SVL97 HIGH FLOW

MUSTANG 2150RT HIGH FLOW

MUSTANG 2550RT HIGH FLOW

MUSTANG 3200VT HIGH FLOW

NEW HOLLAND C332 HIGH FLOW

NEW HOLLAND C334 HIGH FLOW

NEW HOLLAND C345 HIGH FLOW

NEW HOLLAND C362 HIGH FLOW

TAKEUCHI TL12 HIGH FLOW

WACKER NUESON ST35 HIGH FLOW

WACKER NUESON ST40 HIGH FLOW

WACKER NUESON ST45 HIGH


Detailed Specifications

Specification Details
Model Baumalight High Flow Stump Grinder SSL
Hydraulic Flow 22 GPM - 47 GPM
Cutting Depth Up to 15 inches below ground
Swing Arc 63 degrees
Cutting Wheel Speed High torque for efficient grinding
Control Type Manual
Drive System Skid steer
Cutting Height Above Ground Adjustable
Weight Varies by model
Fuel Type Gas
Cooling System Air-cooled
Over Torque Protection Built-in relief system
Input Speed Varies by model
Length Varies by model
Width Varies by model
Safety Features Chain curtain, sleeved hydraulic hoses
Accessories Free replacement teeth, spare teeth holder

 S40/S770

Part #: S40/S770
Mfg: BAUMALIGHT
Category: SKID STEER ATTACHMENTS
SubCategory: STUMP GRINDER SKID STEER HIGH FLOW
Industry: CONSTRUCTION
Machine Size: SSL 35GPM-47GPM

 

S40/S770/D006386

Part #: S40/S770/D006386
Mfg: BAUMALIGHT
Category: SKID STEER ATTACHMENTS
SubCategory: STUMP GRINDER SKID STEER HIGH FLOW
Industry: CONSTRUCTION
Machine Size: SSL 35GPM-47GPM
Attachment Size: BOBCAT WIRE PLUG

 

 S40/S740

Part #: S40/S740
Mfg: BAUMALIGHT
Category: SKID STEER ATTACHMENTS
SubCategory: STUMP GRINDER SKID STEER HIGH FLOW
Industry: CONSTRUCTION
Machine Size: SSL 30GPM-40GPM

 

S40/S740/D006386 

Part #: S40/S740/D006386
Mfg: BAUMALIGHT
Category: SKID STEER ATTACHMENTS
SubCategory: STUMP GRINDER SKID STEER HIGH FLOW
Industry: CONSTRUCTION
Machine Size: SSL 30GPM-40GPM
Attachment Size: BOBCAT WIRE PLUG

 

S28-S645

Part #: S28-S645
Mfg: BAUMALIGHT
Category: SKID STEER ATTACHMENTS
SubCategory: STUMP GRINDER SKID STEER HIGH FLOW
Industry: CONSTRUCTION
Machine Size: SSL 22GPM-32GPM

Manuals & Documents

The Product Manual

General Warranty Info:

  • Ripping It Outdoors works closely with our manufacturers to supply and support your products warranty needs as best as possible!
  • The majority of products come with a manufacturer represented warranty against manufacturing defects for at least a 12 month period after the date of sale. 
  • Expendable components and "wear parts" including but not limited to blades, knives, teeth, oil, chain sprockets, skid shoes, knife mounting discs, and similar components are usually excluded from manufacturer warranties.
  • Please reach out to us for any specific warranty information needed about products and parts you can’t find!

Videos

SERVICE AND INSTRUCTIONAL VIDEOS


Why Breaking in a Replacement Hydraulic Motor is Important

What Can Cause Excessive Case Drain Back-Pressure on Skidsteers?

Testing Skidsteer Case Drain Back-Pressure Using Pressure Gauge

Testing Case Drain Back-Pressure Using Open Case Drain Coupler

How to Remove Seal on Hydraulic Motor or Load Adapter

Demonstrating and Troubleshooting Zero-Leak Relief Valve

How to Replace the Motor Shaft Seal

Inserting a pin in a 8 and 14 pin connector

Shipping

General Shipping Info:

  • Instantly calculate shipping quotes to the lower 48 states by 1. adding this product to your cart, 2. click continue to the checkout page and 3. enter your shipping address to check rates. Contact us for quotes for shipping to Hawaii, Alaska, Canada, Mexico and Internationally.
  • Complimentary lift gate service on all freight shipments where it’s possible. We guarantee safe delivery!
  • Low shipping rates for customers. We have negotiated the best possible rates for customers from our trusted carriers (ODFL, ESTES, UPS, and FedEx).
  • Negotiate shipping rates if you think we can do better please reach out. Keep in mind some shipping rates also include assembly & configuration as well!