Best Quality 40″ Finish Cut Mowers AcrEase Model H40B | Single Cylinder Manual Start Engine | Pull Type | For ATV

Product Description

Best Quality 40″ Finish Cut Mowers AcrEase Model H40B | Single Cylinder Manual Start Engine | Pull Type | For ATV

DESCRIPTION

The H40B Finish Cut Mower is a reliable and compact homeowner-grade mower, designed for precise mowing on residential properties. Powered by a 10.5 HP Briggs & Stratton Power Built single-cylinder engine, this mower provides dependable performance for smaller lawns and properties.

With a 40″ cutting width, the H40B features a deep-deck design and wide side discharge for efficient grass cutting and mulching. The cutting height can be easily adjusted from 1″ to 4″ using the 4-point infinite adjustment system, ensuring flexibility for various mowing conditions. Built with durable 11 GA steel, reinforced with an additional 11 GA top plate, the mower is tough enough to handle residential mowing tasks with ease.

This model is equipped with manual clutch blade engagement, allowing for easy operation. With 3 anti-scalp wheels, the H40B ensures smooth mowing without damaging the turf. It can be conveniently pulled behind ATVs, riding mowers, or zero-turn mowers, making it a versatile addition to any homeowner’s equipment lineup.

Key Features

• Durable Engine: 10.5 HP Briggs & Stratton Power Built non-commercial engine with splash lubrication and pre-cleaner air filter.
• Manual Blade Engagement: Engages blades easily with a manual clutch lever for reliable operation.
• Adjustable Cutting Height: Infinite height adjustment from 1″ to 4″ using the 4-point adjustment system.
• Heavy-Duty Deck Construction: Built with 11 GA steel deck and reinforced top plate for long-lasting durability.
• Deep Deck Design: Wide side discharge with inline blades for efficient cutting and mulching.
• Anti-Scalp Protection: Three anti-scalp wheels ensure smooth mowing without turf damage.
• Versatile Hitching Options: Compatible with ATVs, riding mowers, and zero-turn mowers for easy towing.

10.5HP Briggs & Stratton Power Built non-commercial grade single cylinder engine

The blade spindles used on the AcrEase mowers are built out of heavy-duty welded steel hubs, 25mm (1") steel shafts and large sealed ball bearings.

The cutting height can accurately be adjusted from 1"-4" with the 4-point height adjust system.

The main deck is built out of 11 GA (.120") thick steel with an 11 GA (.120") thick steel top plate for reinforcement.

The deck features a wide side discharge and deep deck design

The blades are easily engaged by simply shifting a manual clutch lever.

ACCESSORIES

Floatation Kit: 

An extra front and back tire can be bolted in the center section of the mower deck. This is handy in the following applications:

• Rough uneven ground where added floatation is needed.
• Hard to reach areas at the waters edge around ponds.
• Extending over a creek banks edge.
• Steep road banks where added traction is needed.
• Gradual crowned or peaked areas in a yard.

Lawn & Garden Hitching: 

Use on riding mowers and zero turn radius mowers.

• The Lawn and Garden Hitching bolts directly to the existing hitch on any riding lawn mower or zero turning radius mower.
• Allows for close hitching of the AcrEase and telescopes in or out to adjust for the tow vehicles deck width.
• Provides a maneuverable quick response system with maximum stability at high mowing speeds and on steep banks.
• When pulling one wing mower use the tow vehicle hitch (telescope hitch)  and short tongue.
• When pulling multiple wing mowers it is necessary to purchase additional hitching.
• The long tongue extension is used when two AcrEase are pulled (one on the left and one on the right). By extending the left side AcrEase back, grass will not be blown onto the right side AcrEase.
• The rear hitch is used for hitching two AcrEase in tandem (both off to the left side).

ATV Tongue: 

Use on ATVs, utility vehicles, and all other tow vehicles without mowing decks.

• The ATV tongue hitches directly to the tow vehicles’ existing hitch with a provided clevis pin.
• Quick and easy initial installation.
• The ATV tongue can be quickly interchanged from the offset position to direct behind towing.
• Quick response maneuverability and stability at high mowing speeds and on steep banks may be reduced slightly.
• Multiple mowers can be pulled with an ATV or UTV by using a combination of Lawn & Garden and ATV Tongue hitching.

Detailed Specifications

In Package

• H40B Finish Cut Mower (40″ cutting width)
• Briggs & Stratton 10.5 HP Power Built Engine
• Two 20″ Mower Blades
• Pneumatic Front and Rear Tires
• 4-Point Infinite Height Adjustment System

Manuals & Documents

General Warranty Info:

• Ripping It Outdoors works closely with our manufacturers to supply and support your products warranty needs as best as possible!
• The majority of products come with a manufacturer represented warranty against manufacturing defects for at least a 12 month period after the date of sale. 
• Expendable components and "wear parts" including but not limited to blades, knives, teeth, oil, chain sprockets, skid shoes, knife mounting discs, and similar components are usually excluded from manufacturer warranties.
• Please reach out to us for any specific warranty information needed about products and parts you can’t find!

Videos

Shipping

General Shipping Info:

• Instantly calculate shipping quotes to the lower 48 states by 1. adding this product to your cart, 2. click continue to the checkout page and 3. enter your shipping address to check rates. Contact us for quotes for shipping to Hawaii, Alaska, Canada, Mexico and Internationally.
• Complimentary lift gate service on all freight shipments where it’s possible. We guarantee safe delivery!
• Low shipping rates for customers. We have negotiated the best possible rates for customers from our trusted carriers (ODFL, ESTES, UPS, and FedEx).
• Negotiate shipping rates if you think we can do better please reach out. Keep in mind some shipping rates also include assembly & configuration as well!