Skip to product information
1 of 6

Kunz Engineering

Best Quality Rough Cut Mower AcrEase Model MR44B

Best Quality Rough Cut Mower AcrEase Model MR44B

Regular price $5,875.00 USD
Regular price Sale price $5,875.00 USD
Sale Sold out
Shipping calculated at checkout.
Optional Wetlands Kit
Optional Electric Lift Kit
Optional Floatation Kit


44″ rough cut model with a non-commercial grade single cylinder electric start engine and manual clutch blade engagement.  Works great behind an ATV for smaller acreage jobs or tight clearance conditions.


  • 44″ Cutting Width
  • 19 HP Briggs & Stratton Engine
  • Commercial Grade Deck Assembly
  • 4 Tire Design
  • Quick Single Crank Height Adjust System
  • Height Adjustment Range From 2″ to 8″
  • Manual Clutch Blade Engagement
  • Conservative 2″ Diameter Sapling Rating
  • Pull Directly Behind or Fully Offset to the Side of the Tow Vehicle.


              MODEL MR44B
              Class Mower Rough Cut (Rear Discharge)
              Engine Make OHV Briggs & Stratton
              Engine Model Intek Professional Single Cylinder
              Engine HP 19
              Lubrication Method Pressure With Filter
              Air Filter Type Standard Air Filter with Pre-Cleaner
              Electric Start (Battery not included) Yes
              Hour/Tach Meter Optional
              Number of Mower Blades 2-23″
              Blade Tip Speed (ft/mm) 19000
              Cutting Width 44″
              Cutting Height 2.0 to 8.0 With Single Crank Assy
              Hitch Directly Behind or Full Offset to Either Side
              Blade Engagement Clutch Manual
              Deck Metal Thickness 10 GA (.135″)
              Deck Top Plate Thickness 3/16″ Backed With 1/4″ Plate at Blade Spindles
              (Blade Spindle Attachment Area)
              Weight 520 lbs
              Pneumatic Fixed Rear Tires 15/600×6, 4 Ply Tubeless (Flat Proof Option Available)
              Pneumatic Front Tires on Casters 5.30/4.50×6, 4 Ply Tubeless (Flat Proof Option Available)
              Fuel Tank Size 3 Gal.
              Blade Spindles
              Shaft Size 30 mm (1-3/16″)
              Bearing # 6206-2RST
              Drive Method 1 B Section “V” Belt (Kevlar)
              Warranty 1 Year Commercial
              Warranty – Engine 1 Year Commercial / 2 Year Residential

              (*FOB Mendota, IL)
              *Prices do not include shipping costs and may vary in different locations.


              19HP Briggs & Stratton Professional non-commercial grade single cylinder engine

              The blade spindles used on the AcrEase mowers are built out of heavy duty welded steel hubs, 30mm (1-3/16") steel shafts, machined steel blade holders and large sealed ball bearings.

              The cutting height can quickly and easily be adjusted from 2"-8" with the single crank height adjustment system.

              The main deck is built out of 10 GA (.135") thick steel with a 3/16" thick steel top plate for reinforcement. An additional 1/4" thick steel plate is welded in the blade spindle mounting location. The three layers of steel in the blade spindle mounting area add up to just under 5/8" thick.

              Unique twin blade design provides more of a mulch action that reduces the size of the clippings and reduces bunching.

              The blades are easily engaged by simply shifting a manual clutch lever.

              The tow bar features a farm clevis type connection. This system provides more degrees of motion than most types of hitching systems. This is necessary to prevent binding in rough uneven terrain.

              Large 3-1/4 gallon fuel tank that provides 3 to 3-1/2 hours of run time


              Floatation Kit: 

              An extra front and back tire can be added to the center section of the mower deck.

              • Great for mowing around ponds and on rough uneven ground where scalping would normally occur.
              • Clamping style receiver allows for adjustments from side to side with both the front and rear tires.
              • Pinned receivers make for quick kit removal when not needed.
              • Works on all existing and new rough cut mowers.

              Wetlands Kit: 

              The Wetlands Kit consists of an extra set of tires and mounting brackets.

              • Great for wetlands or marshy areas that stay wet all year around.
              • Works well in combination with small personal amphibious vehicles and ATVs/UTVs with tracks.
              • Kit more than doubles the tire surface area in contact with the ground.
              • Easy to install.  Works on all existing and new rough cut mowers.
              • The rough cut mower will not float with the wetlands kit installed. Water greater than 2-3″ in depth should be avoided.
              • With the Wetlands Kit installed the minimum cutting height is 3.5″-4″.
              • Works on all existing and new rough cut mowers.

              Electric Lift Kit: 

              The Electric Lift Kit consists of all of the mounting hardware, brackets, electric actuator and wiring with remote control panel.

              • Great for constantly changing terrain and grass/brush heights.
              • Allows for quick cutting height changes on the go from the seat of the tow vehicle.
              • Raise up and over rocks and logs with ease.
              • Heavy duty 1500 lb linear screw actuator made by Linak.
              • Works on all existing and new rough cut mowers.

              View full details