Why 1P24 PTO Shaft Angle is Important
Product Description
Baumalight Stump Grinder | Model 1P24/D005735 | 24" Rotor Size | 20HP-45HP | For Tractor
DESCRIPTION
STUMP GRINDER Tractor must have hydrostatic drive On subcompact tractors with short arms, the D005735 Extension kit is required. Before using the 1P24 Stump Grinder, you must first measure your compact tractor to see if you require our D005735 Extension kit
The 1P24 PTO stump grinder is designed for small tractors equipped with hydrostatic drive and Category 1 3PH. This tractor mounted stump grinder model allows you to grind small and midsized stumps efficiently with a 24" Rotor, carrying 34 replaceable carbide teeth and has a cutting depth of 10" above ground and 6" below ground. With no hydraulics required this versatile PTO Stump Grinder is controlled with gravity feed which is ideal for tractors with no hydraulic remotes. All Baumalight stump grinders are made in North America and sold through dealers so you always will have local support to service or support your stump grinder.
STUMP GRINDER Tractor must have hydrostatic drive
The 1P24 PTO stump grinder is designed for small tractors equipped with hydrostatic drive and Category 1 3PH. This tractor mounted stump grinder model allows you to grind small and midsized stumps efficiently with a 24" Rotor, carrying 34 replaceable carbide teeth and has a cutting depth of 10" above ground and 6" below ground. With no hydraulics required this versatile PTO Stump Grinder is controlled with gravity feed which is ideal for tractors with no hydraulic remotes. All Baumalight stump grinders are made in North America and sold through dealers so you always will have local support to service or support your stump grinder.
Key Features
-
D005735 Extension Kit
The extension brackets attach to the 1P24's 3PH mounting bracket. The extension brackets allow you to increase the installed length of the PTO shaft and maximize shaft overlay through the 3PH range of movement.
How to Measure?
Measure dimensions (A) from the PTO lock groove to the center of the lower link arm pin holes. If the dimensions (A) are less than 20 inches, you will require the D005735 extension kit. PLEASE SEE PICTURE.
QUICK HITCH COMPATIBLE
The 1P24 Stump Grinder is CAT 1 Quick Hitch compatible, allowing you to easily connect to your compact tractor.
SLIP CLUTCH PTO SHAFT
The 1P24 Stump Grinder includes a slip clutch PTO shaft. In the event that the grinder hits a rock, the slip clutch is designed to slip so that the shaft is not damaged. (this started in mid 2020).
SELF-REGULATING FEED
For smoother operation, the 1P24 3-point hitch stump grinder features a self-regulating feed function that uses the weight of the grinder head. If you suddenly advance your tractor while grinding, a hinge will automatically swing the grinding head out a bit, keeping even pressure on the stump.
CARBIDE TIPPED
Like the finest saw blades, the cutting teeth on Stump Blasters are carbide tipped. This incredibly hard material ensures reliable cutting performance. When grinding stumps, buried hazards are inevitable; gravel, stones even metal posts are not uncommon to “find”. Our carbide teeth are designed to stand up to this abuse and keep on blasting stumps to dust.
6 FREE TEETH
All 1P24 Stump Grinder comes with a free set of 6 replacement teeth. These replacement teeth are conveniently shipped in a robust enclosed compartment on top of the frame.
MORE TEETH
Many hands make light work, or in this case fine mulch faster and easier. The high number of teeth means that each tooth does less work. Each of the Stump Blasters teeth only need to make a small cut, because the work is shared by more of these rugged teeth, which last longer and typically only need 2 or 3 replaced at a time. The bolt-on designed teeth allow for straightforward replacement.
ROTOR
The massive ¾" thick steel rotor provides the back bone for the Stump Blaster cutting system. It’s the anchor for the carbide tipped teeth. For smooth operation it’s important that the rotor remains solid, with no flexing. The rugged rotor also provides the Stump Blaster with the extra momentum needed when the grinding is tough, making sure the Stump Blaster can power through the hardest stumps.
MORE CLEARANCE
The Stump Blaster’s carbide teeth extend a full 1-¼ inches from the rotor. This prevents chips and mulch from getting plugged. More chip clearing produces smoother operation and reduces heat build-up that can damage the rotor and cause premature tooth failure.
GREASEABLE PINS
Our grease pins are zinc plated to prevent corrosion which will allow for smoother operation of the units joints over their lifetime.
HOST MACHINE
JOHN DEERE 4044R |
JOHN DEERE 4052R |
KUBOTA L3301 HYDROSTATIC |
KUBOTA L3560 HYDROSTATIC |
KUBOTA L3901 HYDROSTATIC |
KUBOTA L4060 HYDROSTATIC |
KUBOTA L4701 HYDROSTATIC |
KUBOTA LX2610HSDC |
KUBOTA LX3310HSD |
KUBOTA LX3310HSDC |
Detailed Specifications
Specification | 1P24/D005735 |
---|---|
Recommended HP Size | 20-45 |
Maximum Engine HP | 50 |
Maximum PTO HP | 40 |
Transmission | Hydrostatic only |
Hydraulic GPM | – |
Rotor Size | 24" |
Number of Teeth | 34 |
Tooth Part Number | S1000 |
Tooth Construction | Carbide steel bolt-in |
Cutting Wheel Speed | 540 RPM |
Cutting Height - Above Ground | 10" |
Cutting Depth - Below Ground | 6" |
Maximum Cutting Depth - Per Pass | 5" |
Maximum Horizontal Cut | 22" |
Swing Arc | 0° |
Hub Torque | 803 Ft.-Lbs. |
Over Torque Protection | Slip clutch |
Hitch | Cat I |
Quick Hitch Compatibility | Yes |
No. of Remotes Required - Hydraulic | 0 |
Requires 12 Volt DC | No |
Input Speed | 540 |
Unit Weight (Shipping) | 350 lbs |
Width (Shipping) | 48" |
Length (Shipping) | 48" |
Manuals & Documents
The Product Manual
General Warranty Info:
- Ripping It Outdoors works closely with our manufacturers to supply and support your products warranty needs as best as possible!
- The majority of products come with a manufacturer represented warranty against manufacturing defects for at least a 12 month period after the date of sale.
- Expendable components and "wear parts" including but not limited to blades, knives, teeth, oil, chain sprockets, skid shoes, knife mounting discs, and similar components are usually excluded from manufacturer warranties.
- Please reach out to us for any specific warranty information needed about products and parts you can’t find!
Videos
SERVICE AND INSTRUCTIONAL VIDEOS
Shipping
General Shipping Info:
- Instantly calculate shipping quotes to the lower 48 states by 1. adding this product to your cart, 2. click continue to the checkout page and 3. enter your shipping address to check rates. Contact us for quotes for shipping to Hawaii, Alaska, Canada, Mexico and Internationally.
- Complimentary lift gate service on all freight shipments where it’s possible. We guarantee safe delivery!
- Low shipping rates for customers. We have negotiated the best possible rates for customers from our trusted carriers (ODFL, ESTES, UPS, and FedEx).
- Negotiate shipping rates if you think we can do better please reach out. Keep in mind some shipping rates also include assembly & configuration as well!