Baumalight 3pt Mulcher MP348 | 48" Cutting Width | 25HP-40HP| For Tractor

Product Description

Baumalight 3pt Mulcher MP348 | 48" Cutting Width | 25HP-40HP| For Tractor

DESCRIPTION

MP348 Fixed Tooth Mulcher for Power Take Off on a Tractor

The 300 series is our most light weight fixed tooth masticating head brush mulcher for 3-point hitch tractors. With low ground speed the MP348 brush mulcher will efficiently cut heavy vegetation and light brush using high speed teeth. The concave shaped carbide tip provides aggressive brush mulching action by chipping the brush bit by bit. Part of the secret of their performance is the ease of rotating the teeth so there is always a sharp edge to make mulching easier. The spiral tooth pattern helps in one tooth at a time for smooth mulching.

The direct drive of a brush mulcher on the PTO of a tractor is the most efficient way to run a brush mulcher and if you check our brush cutting size charts you will see that the slower you can travel the bigger material you can handle. A heavy duty reinforced belt delivers the force from the gear box to the rotor. Heavy duty gearbox for high performance and better mulching power and long life. To protect the gearbox and drive system, Baumalight PTO Mulchers come with a slip clutch, which automatically disengages the clutch at a predetermined torque. If a fence wire is caught during the mulching process , it can damage the unit by slipping over to the edge of the rotor and get wrapped on the shaft, so wire protection kit is provided to safeguard the rotor and the shaft.
The MS348 small tractor mounted brush mulcher as a rotor diameter of 15 inches(tool tips), rotor width of 48 inches and a path width of 60 inches. The A450 motor option has a cutting capacity of up to 4 inches in brush diameter, see the brush cutting chart to see what your tractor would do.

Key Features

INTEGRATED PUSH BAR

The integrated brush bar helps control the brush and bend taller brush for easier mulching.

ADJUSTABLE SKID SHOES

These two position skid shoes allow you to adjust the cutting height for optimal clearing performance.

V-NOTCH

The force and impact of mulching often bends the teeth. Our V-Notch teeth and hardened holders hold the tooth firmly in place to absorb impacts from multiple directions.

HARDENED TOOTH HOLDERS

These heavy-duty tooth holders resist bending and keep you working longer.

SPIRAL TOOTH PATTERN

For smoother mulching, the spiral tool pattern allows one tooth to engage at a time.

SLIP CLUTCH

To protect the gearbox and drive sytem, Baumalight PTO mulchers come with a slip clutch. Automatically disengaging the clutch at a predetermined torque.

HEAVY DUTY GEARBOX

Heavy duty gearbox for high performance and better mulching power and long life.

HYDRAULIC DOORS

The single debris door is controlled hydraulically from the cab to give the operator more control of the mulching action. When closed the mulch debris is more controlled and a finer mulch is produced.

REINFORCED BELT

A heavy duty reinforced belt delivers the force from the gear box to the rotor. This offers protection from the shocks inherent in mulching.

WIRE PROTECTION KIT

Protective steel cover that prevents damage from wire fencing.

CHAIN CURTAIN

The rear of the unit is guarded by a chain curtain so standing brush enters and mulched debris exits.

GREASEABLE PINS

Baumalight mulchers feature grease pins on all pivot points, reducing the risk of equipment damage and providing long life and easy servicing.

HEAVY DUTY FRAME

Heavy duty frame with T1 alloy tool steel sheet metal for all the main areas. Powder coated frame with multiple anti-slip pads to give you secure footing for ease of entry and exit from your cab.

POWDER COATED

Our powder coat finish is much tougher than conventional paint to stand up to the rigors of mulching and helps prevent rusting.

DOUBLE SHIELDED HOSES

All hoses are sleeved for operator and hose protection. The Connecting hoses are sleeved and wrapped in hose armour for double protection.

Detailed Specifications

Manuals & Documents

The Product Manual

General Warranty Info:

• Ripping It Outdoors works closely with our manufacturers to supply and support your products warranty needs as best as possible!
• The majority of products come with a manufacturer represented warranty against manufacturing defects for at least a 12 month period after the date of sale. 
• Expendable components and "wear parts" including but not limited to blades, knives, teeth, oil, chain sprockets, skid shoes, knife mounting discs, and similar components are usually excluded from manufacturer warranties.
• Please reach out to us for any specific warranty information needed about products and parts you can’t find!

Videos 

SERVICE AND INSTRUCTIONAL VIDEOS

Shipping

General Shipping Info:

• Instantly calculate shipping quotes to the lower 48 states by 1. adding this product to your cart, 2. click continue to the checkout page and 3. enter your shipping address to check rates. Contact us for quotes for shipping to Hawaii, Alaska, Canada, Mexico and Internationally.
• Complimentary lift gate service on all freight shipments where it’s possible. We guarantee safe delivery!
• Low shipping rates for customers. We have negotiated the best possible rates for customers from our trusted carriers (ODFL, ESTES, UPS, and FedEx) & Top Private Drivers.
• Negotiate shipping rates if you think we can do better please reach out. Keep in mind some shipping rates also include assembly & configuration as well!