Baumalight Stump Grinder Skid Steer Standard Flow SSL 12GPM-32GPM | Model S18-S24 | For Skid Steer

Product Description

Baumalight Stump Grinder Skid Steer Standard Flow SSL 12GPM-32GPM | Model S18-S24 | For Skid Steer

Key Features

• High Flow Hydraulic System: Ensures efficient operation with hydraulic flows ranging from 12GPM to 32GPM.
• Deep Cutting Depth: Capable of grinding up to 15 inches below ground level.
• Swing Radius: 63-degree swing radius for smooth and precise grinding.
• Durable Rotor: 1/2 inch thick steel rotor provides strength and stability.
• Carbide Tipped Teeth: Long-lasting teeth that require minimal replacements.
• Easy Maintenance: Bolt-on teeth design for straightforward replacement.
• Multiple Electrical Connections: Compatible with 8 pin, 14 pin, and 7 pin Bobcat connections

CARBIDE TIPPED

Like the finest saw blades, the cutting teeth on Stump Blasters are carbide tipped. This incredibly hard material ensures reliable cutting performance. When grinding stumps, buried hazards are inevitable; gravel, stones even metal posts are not uncommon to “find”. Our carbide teeth are designed to stand up to this abuse and keep on blasting stumps to dust.

Planer Teeth Video

6 FREE TEETH

All S18 Stump Grinder comes with a free set of 6 replacement teeth. These replacement teeth are conveniently shipped in a robust enclosed compartment on top of the frame.

MORE TEETH

The high number of teeth means that each tooth needs to do less work. Each of the Stump Blasters teeth only need to make a small cut, because the work is shared by more of our rugged teeth they last longer and usually only require 2 or 3 replacements at a time. The bolt-on designed teeth allow for straightforward replacement.

HYDRAULIC MOTOR

Skid steer mounted Stump Blasters run on hydraulic motors. For best results, match your equipments flow rate to one of our available hydraulic motor options.

MORE CLEARANCE

The Stump Blaster’s carbide teeth extend a full 1-¼ inches from the rotor. This prevents chips and mulch from getting plugged. More chip clearing produces smoother operation and reduces heat build-up that can damage the rotor and cause premature tooth failure.

ROTOR

The massive ¾" thick steel rotor provides the back bone for the Stump Blaster cutting system. It’s the anchor for the carbide tipped teeth. For smooth operation it’s important that the rotor remains solid, with no flexing. The rugged rotor also provides the Stump Blaster with the extra momentum needed when the grinding is tough, making sure the Stump Blaster can power through the hardest stumps.

GREASEABLE PINS

Our grease pins are zinc plated to prevent corrosion which will allow for smoother operation of the units joints over their lifetime.

HOST MACHINES

Detailed Specifications

SSL 12GPM-22GPM

SSL 12GPM-22GPM RC30 & PT30

SSL 12GPM-27GPM

SSL 25GPM-40GPM

SSL 20GPM-26GPM

SSL 20GPM-26GPM BOBCAT WIRE PLUG

SSL 22GPM-32GPM

SSL 22GPM-32GPM BOBCAT WIRE PLUG

Comparison Chart

Motor Options-Stump Cutting Time Chart

STUMP CUTTING TIMES BASED ON 24" STUMP

Motor	Case Drain	PSI	12 GPM	15 GPM	20 GPM	25 GPM	30 GPM	35 GPM	40 GPM	CC	Motor Type	RPM at MAX GPM
S250 Motor	Not Required	2,500	50 min	40 min	--	--	--	--	--	50	Roller Vane	910
		3,000	40 min	35 min	--	--	--	--	--
S450 Motor	Not Required	2,500	60 min	40 min	35 min	--	--	--	--	125	Roller Vane	520
		3,000	50 min	30 min	30 min	--	--	--	--
S550 Motor	Recommended	3,000	--	30 min	25 min	20 min	16 min	--	--	130	Roller Vane	700
		3,500*	--	30 min	25 min	20 min	16 min	--	--
S650 Motor	Recommended	3,000	--	--	40 min	25 min	15 min	12 min	10 min	245	Roller Vane	540
		3,500*	--	--	30 min	20 min	10 min	8 min	6 min

Note: Motor will run at this PSI but excess pressure is dumping over relief.

 

Manuals & Documents

General Warranty Info:

• Ripping It Outdoors works closely with our manufacturers to supply and support your products warranty needs as best as possible!
• The majority of products come with a manufacturer represented warranty against manufacturing defects for at least a 12 month period after the date of sale. 
• Expendable components and "wear parts" including but not limited to blades, knives, teeth, oil, chain sprockets, skid shoes, knife mounting discs, and similar components are usually excluded from manufacturer warranties.
• Please reach out to us for any specific warranty information needed about products and parts you can’t find!

Videos

Shipping

General Shipping Info:

• Instantly calculate shipping quotes to the lower 48 states by 1. adding this product to your cart, 2. click continue to the checkout page and 3. enter your shipping address to check rates. Contact us for quotes for shipping to Hawaii, Alaska, Canada, Mexico and Internationally.
• Complimentary lift gate service on all freight shipments where it’s possible. We guarantee safe delivery!
• Low shipping rates for customers. We have negotiated the best possible rates for customers from our trusted carriers (ODFL, ESTES, UPS, and FedEx).
• Negotiate shipping rates if you think we can do better please reach out. Keep in mind some shipping rates also include assembly & configuration as well!