Larson Electronics 30' Portable LED Light Tower - 15kW Diesel Generator w/ 50 Gal Tank, (4) 320W LED Lamps - Trailer Mount

DESCRIPTION

The WCDE-LE-15KW-4X320LTL-LED-M1 Portable LED Light Tower from Larson Electronics is a towable lighting package powered by a 15 kW generator. This system features a 30' telescoping mast with manual winch operation for elevating four LED floodlights. With four 320-watt lamps producing 166,400 total lumens, this unit will illuminate a 2-acre outdoor area continuously without refueling for 80+ hours with lights only and 40 hours at full load. This mobile light tower is made in USA (made in Texas) and is BAA compliant.

The WCDE-LE-15KW-4X320LTL-LED-M1 mobile light tower is a powerful lighting solution for outdoor, remote locations. This unit is supported by a water cooled, diesel generator which supplies the current to four 320-watt LED lamps producing 41,600 lumens each for a combined total of 166,400 lumens of light. The light mast can provide 80+ hours of continuous illumination, at extended heights up to 30 feet.

This mobile floodlight package is ideal for emergency services, large scale event illumination, construction, mining, industrial operations and anywhere an extended operation capable mobile lighting solution is needed. The system is FAR 52.225-2 compliant, Buy American Act Compliant and BAA compliant.

Generator: With engine speeds of 1,800 rpm, the four-cylinder unit is capable of generating 15 kW prime power during use. As a low-rpm generator, it operates quieter than 3,600 rpm "throw-away" models. Because 3,600 rpm generators have higher speeds, the units wear out faster and require less copper during operation.

The WCDE-LE-15KW-4X320LTL-LED-M1 is equipped with a 50-gallon polyethylene fuel tank. It features single-phase 120/240V, as well as a 4-position key activated switch (off, run, glow and start). This unit will automatically shut down in the event of an abnormal condition related to low oil pressure and high coolant pressure. This system comes with an hour meter and glow plugs.

Receptacles: An included 150-amp main breaker features four receptacles protected by breakers: one 30-amp breaker protecting one 30-amp L6-30R 250V NEMA twist-lock receptacle and eight 5-15R/5-20R 120V NEMA T-slot duplex outlets.

Lights: The lighting system on this unit is comprised of four, 320-watt LED lamps producing 41,600 lumens of light each attached to the end of the telescoping light boom. These floodlights produce a wide flood light pattern with a combined total of 166,400 lumens of light and can be rotated 360 degrees. Each floodlight is securely fastened to the light boom and each lamp includes a support bracket to help maintain lamp stability within its housing. Each light has its own on/off switch.  The lamps have a 60° flood beam angle configuration for wide area illumination in outdoor areas.

Heat Management: Heat is the single largest factor in premature LED failure and color shifting. These LED units feature individual heat sinks per bank of six LEDs to control heat buildup rather than utilizing a single housing to dissipate heat. This allows for more thorough cooling of the LEDs for extended operating periods. This allows the LEDs to be driven at up to 90% capacity without overheating or visible loss of light output. The end result is more light with less heat and longer LED life with an average 70% lumen maintenance after 80,000 hours. In addition, should an LED failure occur, these LED flood lights are field serviceable. Each bank of six LEDs can be replaced with the fixture installed. This allows for the tower to stay in operation until repairs can take place, and eliminates the need to remove and disassemble the entire fixture for repairs.

Durability: As well as unparalleled heat control, the LED lights from Larson Electronics also offer IP67 rated construction that is designed to withstand extremes of environmental and operating conditions. These units can withstand rapid temperature changes of -40° Celsius to +80° Celsius, are waterproof, and resist ingress of dust, dirt and humidity. The housings are formed from die cast aluminum and the optics are high transmission PMMA with 98% light transmittance. The LEDs help these units achieve resistance to vibrations and are rated at 70% lumen maintenance after 80,000 hours of use. We recommend these LED lights for use in applications where a lot of vibration, dust, dirt, dampness and abusive working conditions are encountered.

Unlike gas burning and arc type lamps that have glass bulbs, LEDs have no filaments or fragile housings to break during operation. Instead of heating a small filament or using a combination of gases to produce light, light emitting diodes (LEDs) use semi-conductive materials that illuminate when electric current applied and emitting light. With LED lights, there is no warm up time or cool down time before re-striking and provide instant illumination when powered on, adding to the reliability of LED technology. By nature, LED light sources run significantly cooler than traditional lamps, reducing the chance of accidental burns and increased temperatures due to heat emissions. This solid state design of light emitting diodes provides a more reliable, stable, durable, and energy efficient light source over traditional lighting.

Light Controls: Operators can access individual on/off controls for individual fixtures. These LED floodlights are protected by a 15-amp breaker per circuit.

Telescoping Boom: The fold-over telescoping boom extends up to 30 feet through the use of a dual, self-braking winch and allows for rotating the lights 360 degrees. The telescoping boom is capable of withstanding 65 mph winds when extended to its full height and the stabilizing outriggers are deployed.

Housing: All of the operating components are housed within a protective compartment constructed of 14ga sheet steel with a galvanized finish, which is designed to provide airflow for cooling. Side wing doors provide access to the interior while latches provide secure closing when the unit is in use. The entire unit can be loaded and unloaded onto trucks via forklift skid pockets at the bottom of the system or four D rings. The entire unit is mounted onto a two-wheel trailer with a 2,200 lbs leaf spring axle. A standard 2" ball hitch and two standard safety chains allow for easy hookup and towing. The stop, tail, turn and license plate lights are LED. Maximum towing speed is 55 mph.

Applications: This portable generator is suitable for use in remote locations, such as temporary camps, construction sites, military bases and areas without reliable access to the grid. It can be utilized to power a wide range of heavy duty tools and equipment, including laptops, portable machines and mobile devices. The unit’s robust recharging options offer flexibility in environments where access to reliable power sources are severely limited.

SPECIFICATIONS

WCDE-LE-15KW-4X320LTL-LED-M1 Mobile Light Tower 

Engine Specs:

• Engine: Perkins (if available)
• Engine Type: Diesel, Liquid Water Cooled, EPA Final Tier 4
• Engine Speed: 1800 RPM
• No. of Cylinders: 4
• Horsepower: 40 HP
• Rated Prime Power: 15 kW

Fuel System Specs:

• Tank Type: Polyethylene Tank
• Fuel Capacity: 50 Gallons
• Runtime: 80 Hours for LED Lights, 40 Hours Full Load
• Fuel Consumption Gal/Hr: -
• Exterior Fill Port Diameter: 3.5"

Cooling/Lubrication System Specs:

• Air Filter: Dry Type Cartridge
• Oil Filter: Full Flow, Spin-on
• Service Interval: 750 Hrs

Generator Specs:  

• Generator: Brushless  
• Alternator: Cummins  
• Voltage: 120/240V, 1-phase, 60Hz  
• Efficiency Rating: 89.2  
• Voltage Regulation: +/-1% Voltage Regulation  
• Battery: Wet Cell  
• Exhaust: CARB (California) Compliant, EPA Tier 4 Final Compliant  
• Fuel Filter: Included w/ Replaceable Element  

Control Specs:  

• Control Panel Type: External, Illuminated Control Panel w/ Sealed Switches  
• Switch: 4-position, Key Activated - Off, Run, Glow, Start  
• Meter: Digital Hour Meter  
• Light Control: Individual On-Off Switch for Each Light Fixture  
• LED Breakers: 15A Breakers per Circuit

Convenience Receptacles w/ Individual Breakers Specs:

• Main Breaker Capacity: 150A Main Breaker  
• Breakers: (1) 30A and (8) 20a
• Receptacles: (1) 30A L6-30R NEMA Twist Lock [250V], (8) 20A 5-15R/5-20R GFCI T-slot Duplex Outlet [120V]  

Light Mast Specs:  

• Mast Type: Manual Crank-Up, Fold Over  
• Boom Height: Up to 30`  
• Boom Rotation: 360° Range of Motion, Adjustable from Ground during Full Extension, Rotation Lock  
• Materials: Aluminum  
• Finish: Powder Coated Black  
• Operation: Dual Winch System  
• Winch: 1,500 lbs - Self-Braking  
• Cord: Self-retracting Coiled Mast Cord
• Wind Rating: 65 mph 

Light Specs:

• Lamp Type: LED
• Lamp Qty: (4)
• Total Watts: 1,280W
• Single-lamp Watts: 320W
• Total Lumens: 166,400 lms
• Single-lamp Lumens: 41,600 lms
• Luminous Efficiency: 164 lm/w
• LED Color Temperature: Cool White - 5500-6500K
• LED Life Expectancy: 80,000 hours
• Beam Angle: 60° Flood
• Optics Efficiency: 98% - PMMA High Transmittance Optics
• Ambient Temperature Range: -40°C to +80°C
• Materials: Die Cast Aluminum w/ Powder Coated Black Finish
• Mounting: Trunnion Mount U-Bracket
• Waterproof Rating: IP67 LED Lights
• Coverage: 2 Acres, 87,120 ft2

Trailer/Housing Specs 

• Enclosure Type: Durable, steel vented housing customized to store, protect and maximize functionality of power generation, power storage and light tower components
• Enclosure Material: 14ga Sheet Steel
• Trailer Finish: Galvanized
• Dimensions: 145" L x 60" W x 88" H
• Max Towing Weight: 3,600 lbs
• Height Adjustment: Hitch Up and Down
• Hitch: Reversible 2” Ball Hitch
• Wheelbase: 60"
• D Rings: (4) Side of Trailer
• Forklift Pockets: (2) Trailer Base for Low Point Access Lifting
• Pickeye: (1) Crane Hook Pickeye for High Point Access Lifting
• Safety Chains: 7,800 lb Safety Chains with Spring Loaded Safety Hooks for Connecting to Tow Vehicle
• Tongue: Removable w/ (1) 1000lb manual crank tongue jack
• Outriggers: (4) 2ft Extending Stabilizing Outriggers w/ 1000 lb Manual Crank Jacks
• Axle: (1) 5000 lb Axle
• Fenders: Steel
• Brake System: Electric
• LED Lighting: DOT Approved Tail, Side, Brake, Directional and License Plate LED Lights
• Wheels: (2) 16" Steel Rims
• Tires: (2) ST235/80R16 High Capacity Trailer Rated Tires
• Maximum Tow Speed: 55 mph
• Shipping Dimensions: -
• Weight: -

Protection

• Made in USA, Made in Texas
• BAA Compliant
• Buy American Act Compliant
• FAR 52.225-2 compliant
• 15 kW Genset
• 50 Gallon Fuel Capacity
• 30' Fold Over Mast
• Low Oil, High Engine Temp Auto Shut-Off
• Four Point Outrigger System
• Steel Trailer w/ Industrial Grade Paint Finish
• (4) LED Fixtures
• Independently Adjustable Light Heads
• 164 Lumens Per Watt Efficiency
• Withstands 65 Mph Winds at Full Extension
• 98% Transmission High Purity PMMA Optics
• 70% Lumen Retention after 80,000 Hours
• Multiple LED Banks for Heat Dispersion
• Rear Located Engine Controls, Lighting Controls and Receptacles
• Lift-up Enclosure w/ Hydraulic Lift Assist Arms for Engine Access and Fuel Tank
• Engine Controls and Lighting Controls Located Behind Hinged Door w/ Viewing Window

Larson Electronics LLC manufactures a wide variety of products, including custom built to spec designs. The pictures displayed for this unit are a general representation of form factor for the product line and may not accurately represent this exact configuration in every detail due to custom builds and changes between similar products in our standard catalog. The specifics for this configuration are listed in the specification table and supporting documentation (CAD files, Dimensional Drawing, Name Plate Diagram, Wiring Diagram, etc.). This means that specific details (receptacles, plugs, wires, connections, mounting brackets, external finishes, etc.) may not be accurately represented in images vs specifications. Please review specifications and do not order based solely on images.