Option 1: “Contact Usto make sure you are getting the best unit possible. These machines are complex so let us help you get exactly what you need!
Option 2: (quickest response times) Step 1. Add the item to your cart Step 2. Checkout or Click on the Chat button box that is at the bottom right of your screen Step 3. Please tell us any info you think we would need to know Step 4. Relax, our team is processing your request and an expert will be in touch to get you exactly what you need!
DESCRIPTION
Attracts and collects all types of floating waste
Collec’Thorattracts and collectsall solid and liquid waste floatingon the water’s surface. Silent and effective, Collec’Thor is installed at the water’s edge and/or on floating docks in areas where marine waste routes have been identified.
It operates continuously and silently, attracting waste over a large area. It can hold up to 100 kg or 220lb of waste. Highly ergonomic, with no waste bag, easy waist-level emptying and cleaning, and a handle system for easy maintenance.
Take the manual work out of cleaning!
Specs Electric operation (750 W) Durable industrial pump for a long lifespan
Make sure to check sacrificial anodes. They must be replaced imperatively once consumed.
Make sure the winch cable is well fitted into every pulley.
Make sure the winch cable is not frayed
Make sure the rear door closes correctly • Make sure the beams (x2) are free of any obstacles (e.g.: marine life or trash)
Removing Trash: 1. When taking the trash out, make sure to pull out both tabs from the Collec’Thor, refering to the drawing.
2. Make sure to gently wait for the tank to empty of water : a - turn off the pump : noise change will indicate when to turn it off b - proceed to using the winch to lift the Collec’Thor
3. Warning: Do not let the pump run for too long when the tank is empty of water
Maintenance:
Thoroughly clean the Collec’Thor with a pressure washer every 2 to 3 weeks. Inside surfaces as well as outside surfaces. Beware to include the external surface of the pump as shown on the picture below. Make sure the bolts are properly tightened on both sides of the lifting structure. Check the pulleys.
Every 2 to 3 weeks: Unscrew the PVC fitting under the pump, referring to the drawing below. Lubricate the pump with WD40 type of lubricant or marine specialised lubricant. Clean the outside and the inside of the pump using clear water.
Once a year: Perform an oil change. Refer to the pump instructions manual delivered with the Collec’Thor.
In the event of prolonged stop - over a week: Strictly maintain the Collec’Thor out of the water. Clean the pump referring to the procedure below Lubricate the pump with WD40 type of lubricant or marine specialised lubricant.
-Let us make sure you are getting the perfect cleaning system and you have all your needs covered. Check out the full lineup of: The Searial Cleaners!