Turbo Turf Hydroseeder | Model Hs-100-P | Capacity 100 Gallon | 4HP | Trailer Type
Turbo Turf Hydroseeder | Model Hs-100-P | Capacity 100 Gallon | 4HP | Trailer Type
Couldn't load pickup availability
Couldn't load pickup availability
Product Description
Turbo Turf Hydroseeder | Model Hs-100-P | Capacity 100 Gallon | 4HP | Trailer Type
Lead Time:
- HE & Harve Series - 24 - 26 Week
- The T models 400 and up - 10 - 12 Week
- Small 50-150 to Jet agitated models - 2 - 4 Week
- 300 is - 4-6 Week
DESCRIPTION
The Turbo Turf HS-100-P Hydroseeder is a versatile 100-gallon pull-type unit designed for efficient seeding and lawn renovation projects. Featuring a clevis hitch and equipped with two 20 x 10.0 x 8 tires on demountable hubs, it is easily pulled by compact tractors, ATVs, or utility vehicles like the John Deere Gator. Powered by a reliable 4 H.P. Honda engine directly coupled to a high-volume 2" x 2" centrifugal pump, this hydroseeder delivers consistent performance for covering up to 1300 square feet per load.
PUMP
This unit used a 2″ x 2″ centrifugal pump with an output of –180 gallons a minute of flow and 42 P.S.I. of pressure. We have been using this pump for nearly 20 years and it has provided excellent performance and durability. The housing material is cast aluminum and it is easy to service and maintain. There are no grease fittings and the only maintenance required is to winterize if at the end of the season if it is stored where temperatures go below freezing. The pump impeller mounds on the end of the engine shaft so there is no power loss. Typically it can operate for 5 to 10 years with no maintenance. The only thing to be careful of is to not run it dry.
ENGINE
This unit comes with a 4 H.P. Honda recoil start engine. This has proved to be a very reliable engine with a long life. The engine has a two year warranty and service for the engine is available.
HOSE
This unit comes standard with 100 ft of 1 1/4″ I. D. hose. The hose we use is both strong and light weight. It is made from a poly material with a spiral reinforcement. Additional hose is available in 50 foot sections. The unit will handle up to 150 feet of hose.
OPERATION
This unit is easy to run. There are only two valves on the unit. The main mixing valve is opened fully when mixing and closed to a 45 degree angle in which case it is half open and half closed. This provides some mixing action but gives added spray power. There is also a valve going to the discharge hose. This is always fully open when spraying but can be closed to disconnect the discharge hose. The discharge hose is connected with a quick coupler. Should you need to go someplace to get water the hose can quickly be disconnected so when you have a new load mixed up you can connect the hose and start spraying right where you left off. It eliminates the need to wrap up the hose before you are finished.
TRANSPORT
The HS-100-P is a pull type unit that can be pulled behind a tractor ATV or utility vehicle. It is equipped with a clevis style hitch. It is not designed to be pulled on the road or at highway speeds. It is for off road use and is not highway legal.
Key Features
- Poly Tank: Durable, rust-resistant 110-gallon poly tank.
- Engine: 4 H.P. Honda engine with recoil start.
- Pump: 2" x 2" centrifugal pump delivers 180 GPM and 43 PSI.
- Tires & Wheels: 205/65-10 tires with 4-bolt hubs for easy mobility.
- Hitch: Clevis hitch for secure attachment to vehicles.
- Nozzles: Includes wide hydroseeding, straight distance, and trim nozzles for versatile spraying.
- Coverage: Seeds up to 1300 square feet per load.
- Agitation: Continuous agitation for uniform mixing.
- Control at Gun: Adjust flow at the gun without adjusting at the unit.
- Compatibility: Suitable for 100% paper and pourable mulches; cannot use wood mulches.
- Dimensions: 47" W x 77" L x 49" H (overall size).
Detailed Specifications
| Feature | Specification |
|---|---|
| Tank Capacity | 110 Gallons |
| Engine | 4 H.P. Honda, recoil start |
| Pump | 2" x 2" centrifugal, 180 GPM, 43 PSI |
| Tires & Wheels | 205/65-10 tires with 4-bolt hubs |
| Overall Size | 47" W x 77" L x 49" H |
| Empty Weight | 320 pounds |
| Loaded Weight | 1,120 pounds |
| Standard Hose | 100 feet |
In Package
- Turbo Turf HS-100-P Hydroseeder with 100 feet of discharge hose and three nozzles.
Material Cost Breakdown
- Mulch: 0.5 bales at $11.95 per bale = $5.98
- Seed: 5 pounds at $2.05 per pound = $10.25
- Fertilizer: 1.33 pounds at $2.19 per pound = $2.91
- Tackifier: 0.67 oz at $1.00 per oz = $0.67
- Total Material Cost for the Load: $19.81
Coverage:
- Approximately 667 sq. ft.
- Cost per Sq. Ft.: 2.97 cents per sq. ft.
10,000 Sq. Ft. Residential Job:
-
At 10 cents per sq. ft.:
- Charge: $1,000.00
- Material Cost: $297.00
- Profit: $703.00
-
At 15 cents per sq. ft.:
- Charge: $1,500.00
- Material Cost: $297.00
- Profit: $1,203.00
General Supply Information for a One Acre Job
Paper Mulch Covering:
- 1000 lbs per acre: 25 40# paper bales, $21.95 per bale, totaling $548.75
- 1200 lbs per acre: 30 40# paper bales, $21.95 per bale, totaling $658.50
- 1500 lbs per acre (steeper slope): 38 40# paper bales, $21.95 per bale, totaling $834.10
Fertilizer:
- 2-4 bags per acre
- For residential use: 4 bags
- For non-residential use: 2 bags
- Cost per bag: $59.95
Trafficker:
- For flat to slight slope: Turbo Tack, covers one acre, $49.95
Tracker:
- For slopes: Witches Brew, covers one acre, $69.96
Wood Blend Mulch or 100% Wood:
- Typical coverage: 2000 lbs per acre
- For steep slopes: Up to 3500 lbs per acre
Seed Costs:
- Reach out to us or check your local seed supplier
How Quickly Can I Do a 10,000sf Hydroseeding Job?
50-Gallon Hydroseeder:
- Coverage per Load: Approximately 667 sq. ft.
- Number of Loads Needed: About 15 loads (10,000 / 667).
- Estimated Time per Load: Assuming approximately 20 minutes per load (including refilling and application).
- Total Time: 15 loads x 20 minutes = 300 minutes or 5 hours.
100-Gallon Hydroseeder:
- Coverage per Load: Approximately 1,333 sq. ft.
- Number of Loads Needed: About 8 loads (10,000 / 1,333).
- Estimated Time per Load: Assuming approximately 25 minutes per load.
- Total Time: 8 loads x 25 minutes = 200 minutes or about 3 hours and 20 minutes.
150-Gallon Hydroseeder:
- Coverage per Load: Approximately 2,000 sq. ft.
- Number of Loads Needed: 5 loads (10,000 / 2,000).
- Estimated Time per Load: Assuming approximately 30 minutes per load.
- Total Time: 5 loads x 30 minutes = 150 minutes or 2.5 hours.
300-Gallon Hydroseeder:
- Coverage per Load: Approximately 4,000 sq. ft.
- Number of Loads Needed: 2.5 loads (10,000 / 4,000).
- Estimated Time per Load: Assuming approximately 40 minutes per load.
- Total Time: 2.5 loads x 40 minutes = 100 minutes or about 1 hour and 40 minutes.
500-Gallon Hydroseeder:
- Coverage per Load: Approximately 6,667 sq. ft.
- Number of Loads Needed: 1.5 loads (10,000 / 6,667).
- Estimated Time per Load: Assuming approximately 45 minutes per load.
- Total Time: 1.5 loads x 45 minutes = 68 minutes or about 1 hour and 8 minutes.
750-Gallon Hydroseeder:
- Coverage per Load: Approximately 10,000 sq. ft.
- Number of Loads Needed: 1 load.
- Estimated Time per Load: Assuming approximately 50 minutes per load.
- Total Time: 50 minutes.
1000-Gallon Hydroseeder:
- Coverage per Load: Approximately 13,333 sq. ft.
- Number of Loads Needed: 1 load.
- Estimated Time per Load: Assuming approximately 50 minutes per load.
- Total Time: 50 minutes.
Hydroseeder Options & Add-Ons!
Manuals & Documents
General Warranty Info:
- Ripping It Outdoors works closely with our manufacturers to supply and support your products warranty needs as best as possible!
- The majority of products come with a manufacturer represented warranty against manufacturing defects for at least a 12 month period after the date of sale.
- Expendable components and "wear parts" including but not limited to blades, knives, teeth, oil, chain sprockets, skid shoes, knife mounting discs, and similar components are usually excluded from manufacturer warranties.
- Please reach out to us for any specific warranty information neededabout products and parts you can’t find!
Videos
Shipping
General Shipping Info:
- Instantly calculate shipping quotes to the lower 48 states by 1. adding this product to your cart, 2. click continue to the checkout page and 3. enter your shipping address to check rates. Contact us for quotes for shipping to Hawaii, Alaska, Canada, Mexico and Internationally.
- Complimentary lift gate service on all freight shipments where it’s possible. We guarantee safe delivery!
- Low shipping rates for customers. We have negotiated the best possible rates for customers from our trusted carriers (ODFL, ESTES, UPS, and FedEx).
- Negotiate shipping rates if you think we can do better please reach out. Keep in mind some shipping rates also include assembly & configuration as well!