Turbo Turf Hydro Seeding System | Model HS-1000 XPW | Capacity 1000 Gallon | 16HP | Skid / Trailer Type
Turbo Turf Hydro Seeding System | Model HS-1000 XPW | Capacity 1000 Gallon | 16HP | Skid / Trailer Type
Couldn't load pickup availability
Couldn't load pickup availability
Product Description
Turbo Turf Hydro Seeding System | Model HS-1000 XPW | Capacity 1000 Gallon | 16HP | Skid / Trailer Type
Lead Times:
- HE & Harve Series - 24 - 26 Week
- The T models 400 and up - 10 - 12 Week
- Small 50-150 to Jet agitated models - 2 - 4 Week
- 300 is - 4-6 Week
DESCRIPTION
The Turbo Turf HS-1000-XPW is a powerful 1000-gallon skid type hydroseeder designed for residential and commercial seeding projects, offering high efficiency and robust performance.
The HS-1000-XPW from Turbo Turf is designed to meet the rigorous demands of hydroseeding professionals, offering powerful performance, durability, and ease of operation. Whether seeding expansive residential lawns or tackling large commercial projects, this hydroseeder provides the capacity and efficiency needed to get the job done effectively.
PUMP
This unit uses a TP4VE centrifugal pump with 662 gallons a minute of flow and 50 P.S.I. of pressure. This pump was designed specifically for hydro seeding. This pump is very low maintenance. There are no grease fittings and the only maintenance required is to winterize if at the end of the season if it is stored where temperatures go below freezing. The pump impeller mounts on the end of the engine shaft so there is no power loss. Typically it can operate for 5 to 10 years with no maintenance. The only thing to be careful of is to not run it dry.
ENGINE
This unit comes with a 16 H.P. Vanguard Briggs & Stratton engine. This has proved to be a very reliable engine with a long life. The engine has a two year warranty and service for the engine is available at any authorized Briggs & Stratton engine dealer. This unit has a self contained fuel tank.
ENGINE
This unit comes standard with 100 ft of 1 1/4″ I. D. hose. The hose we use is both strong and light weight. It is made from a poly material with a spiral reinforcement. Additional hose is available in 50 feet or 100 feet sections. The unit will handle up to 200 feet of hose.
BALE BUSTER
This unit comes equipped with a bale buster to speed loading. The bale buster allows you to add mulch in larger chunks and will quickly break them up. Dry mulch floats on top of the water. The bale buster takes the full flow of the pump and blows it across the top of the water picking up those chunks of mulch and smashing them against the back of the tank. Users can add mulch in chunks any size that will fit through the 16″ opening.
TRAILER
The HS-750-P is permanently attached to a DOT approved double axle trailer with brakes on both axles, DOT lighting, a breakaway, safety chains and an on-board test box for the breakaway battery. The trailer has a GVW of 9990 pounds and is 15’2″ long an 84″ wide. It is available with either a 2 5/16″ ball hitch or a pintle hitch.
Key Features
- Powerful Pump: Equipped with a 4″ x 4″, 662 G.P.M. high volume centrifugal pump that delivers material at 50 P.S.I., ensuring efficient application of hydroseeding materials including mulches, seeds, and fertilizers.
- Engine: Powered by a reliable 16 HP Vanguard Briggs & Stratton engine with electric start, providing ample power for continuous operation.
- Versatile Application: Capable of seeding up to 13,000 square feet per load, making it suitable for both large-scale residential lawns and commercial projects. It can handle up to 4 acres per day with a good water source.
- Ease of Operation: Comes with 100 feet of 1 1/4″ discharge hose, gun, and three nozzles (wide hydro seeding, medium, and straight), offering flexibility and control during spraying operations.
- Additional Features: Includes a Jet “Bale Buster” for easy loading of hydroseeding mulch bales, quick coupler on jets for easy servicing, quick disconnect for the discharge hose, and a poly tank that is rust-resistant and durable.
- Efficient Design: Features continuous agitation, allowing for consistent mixing of materials and the ability to handle partial loads with ease.
Detailed Specifications
| Specification | Details |
|---|---|
| Tank Capacity | 1000 Gallons |
| Engine | 16 H.P. Vanguard Briggs & Stratton with electric start |
| Pump | 4" x 4" centrifugal pump, 662 GPM, 50 PSI |
| Skid Size | 61" x 115" |
| Overall Size | 82" x 123" x 78" |
| Coverage | Up to 13,000 sq. ft. per load |
| Empty Weight | 1315 pounds |
| Loaded Weight | 9400 pounds |
| Standard Hose | 100 feet of 1 1/4" hose |
Material Cost Breakdown
50-Gallon Hydroseeder
- Mulch: 0.5 bales at $11.95 per bale = $5.98
- Seed: 5 pounds at $2.05 per pound = $10.25
- Fertilizer: 1.33 pounds at $2.19 per pound = $2.91
- Tackifier: 0.67 oz at $1.00 per oz = $0.67
- Total Material Cost for the Load: $19.81
- Coverage: Approximately 667 sq. ft.
- Cost per Sq. Ft.: 2.97 cents per sq. ft.
- 10,000 Sq. Ft. Residential Job:
- At 10 cents per sq. ft.: Charge = $1,000.00; Material Cost = $297.00; Profit = $703.00.
- At 15 cents per sq. ft.: Charge = $1,500.00; Material Cost = $297.00; Profit = $1,203.00.
100-Gallon Hydroseeder
- Mulch: 1 bale at $11.95 per bale = $11.95
- Seed: 10 pounds at $2.05 per pound = $20.50
- Fertilizer: 2.67 pounds at $2.19 per pound = $5.85
- Tackifier: 1.33 oz at $1.00 per oz = $1.33
- Total Material Cost for the Load: $39.63
- Coverage: Approximately 1,333 sq. ft.
- Cost per Sq. Ft.: 2.97 cents per sq. ft.
- 10,000 Sq. Ft. Residential Job:
- At 10 cents per sq. ft.: Charge = $1,000.00; Material Cost = $297.00; Profit = $703.00.
- At 15 cents per sq. ft.: Charge = $1,500.00; Material Cost = $297.00; Profit = $1,203.00.
150-Gallon Hydroseeder
- Mulch: 1.5 bales at $11.95 per bale = $17.93
- Seed: 15 pounds at $2.05 per pound = $30.75
- Fertilizer: 4 pounds at $2.19 per pound = $8.76
- Tackifier: 2 oz at $1.00 per oz = $2.00
- Total Material Cost for the Load: $59.44
- Coverage: Approximately 2,000 sq. ft.
- Cost per Sq. Ft.: 2.97 cents per sq. ft.
- 10,000 Sq. Ft. Residential Job:
- At 10 cents per sq. ft.: Charge = $1,000.00; Material Cost = $297.00; Profit = $703.00.
- At 15 cents per sq. ft.: Charge = $1,500.00; Material Cost = $297.00; Profit = $1,203.00.
500-Gallon Hydroseeder
- Mulch: 5 bales at $11.95 per bale = $59.75
- Seed: 50 pounds at $2.05 per pound = $102.50
- Fertilizer: 13 pounds at $2.19 per pound = $28.47
- Tackifier: 6.67 oz at $1.00 per oz = $6.67
- Total Material Cost for the Load: $197.39
- Coverage: Assuming linear scaling, a 500-gallon unit covers approximately 6,667 sq. ft.
- Cost per Sq. Ft.: 2.96 cents per sq. ft.
- 10,000 Sq. Ft. Residential Job:
- At 10 cents per sq. ft.: Charge = $1,000.00; Material Cost = $296.70; Profit = $703.30.
- At 15 cents per sq. ft.: Charge = $1,500.00; Material Cost = $296.70; Profit = $1,203.30.
750-Gallon Hydroseeder
- Mulch: 7.5 bales at $11.95 per bale = $89.63
- Seed: 75 pounds at $2.05 per pound = $153.75
- Fertilizer: 20 pounds at $2.19 per pound = $43.80
- Tackifier: 10 oz at $1.00 per oz = $10.00
- Total Material Cost for the Load: $297.18
- Coverage: Approximately 10,000 sq. ft.
- Cost per Sq. Ft.: 2.97 cents per sq. ft.
- 10,000 Sq. Ft. Residential Job:
- At 10 cents per sq. ft.: Charge = $1,000.00; Material Cost = $297.18; Profit = $702.82.
- At 15 cents per sq. ft.: Charge = $1,500.00; Material Cost = $297.18; Profit = $1,202.82.
1000-Gallon Hydroseeder
- Mulch: 10 bales at $11.95 per bale = $119.50
- Seed: 100 pounds at $2.05 per pound = $205.00
- Fertilizer: 26.67 pounds at $2.19 per pound = $58.43
- Tackifier: 13.33 oz at $1.00 per oz = $13.33
- Total Material Cost for the Load: $396.26
- Coverage: Approximately 13,333 sq. ft.
- Cost per Sq. Ft.: 2.97 cents per sq. ft.
- 10,000 Sq. Ft. Residential Job:
- At 10 cents per sq. ft.: Charge = $1,000.00; Material Cost = $297.00 (rounded); Profit = $703.00.
- At 15 cents per sq. ft.: Charge = $1,500.00; Material Cost = $297.00; Profit = $1,203.00.
General Supply Information for a One Acre Job
Paper Mulch Covering:
- 1000 lbs per acre: 25 40# paper bales, $21.95 per bale, totaling $548.75
- 1200 lbs per acre: 30 40# paper bales, $21.95 per bale, totaling $658.50
- 1500 lbs per acre (steeper slope): 38 40# paper bales, $21.95 per bale, totaling $834.10
Fertilizer:
- 2-4 bags per acre
- For residential use: 4 bags
- For non-residential use: 2 bags
- Cost per bag: $59.95
Trafficker:
- For flat to slight slope: Turbo Tack, covers one acre, $49.95
Tracker:
- For slopes: Witches Brew, covers one acre, $69.96
Wood Blend Mulch or 100% Wood:
- Typical coverage: 2000 lbs per acre
- For steep slopes: Up to 3500 lbs per acre
Seed Costs:
- Reach out to us or check your local seed supplier
How Quickly Can I Do a 10,000sf Hydroseeding Job?
50-Gallon Hydroseeder:
- Coverage per Load: Approximately 667 sq. ft.
- Number of Loads Needed: About 15 loads (10,000 / 667).
- Estimated Time per Load: Assuming approximately 20 minutes per load (including refilling and application).
- Total Time: 15 loads x 20 minutes = 300 minutes or 5 hours.
100-Gallon Hydroseeder:
- Coverage per Load: Approximately 1,333 sq. ft.
- Number of Loads Needed: About 8 loads (10,000 / 1,333).
- Estimated Time per Load: Assuming approximately 25 minutes per load.
- Total Time: 8 loads x 25 minutes = 200 minutes or about 3 hours and 20 minutes.
150-Gallon Hydroseeder:
- Coverage per Load: Approximately 2,000 sq. ft.
- Number of Loads Needed: 5 loads (10,000 / 2,000).
- Estimated Time per Load: Assuming approximately 30 minutes per load.
- Total Time: 5 loads x 30 minutes = 150 minutes or 2.5 hours.
300-Gallon Hydroseeder:
- Coverage per Load: Approximately 4,000 sq. ft.
- Number of Loads Needed: 2.5 loads (10,000 / 4,000).
- Estimated Time per Load: Assuming approximately 40 minutes per load.
- Total Time: 2.5 loads x 40 minutes = 100 minutes or about 1 hour and 40 minutes.
500-Gallon Hydroseeder:
- Coverage per Load: Approximately 6,667 sq. ft.
- Number of Loads Needed: 1.5 loads (10,000 / 6,667).
- Estimated Time per Load: Assuming approximately 45 minutes per load.
- Total Time: 1.5 loads x 45 minutes = 68 minutes or about 1 hour and 8 minutes.
750-Gallon Hydroseeder:
- Coverage per Load: Approximately 10,000 sq. ft.
- Number of Loads Needed: 1 load.
- Estimated Time per Load: Assuming approximately 50 minutes per load.
- Total Time: 50 minutes.
1000-Gallon Hydroseeder:
- Coverage per Load: Approximately 13,333 sq. ft.
- Number of Loads Needed: 1 load.
- Estimated Time per Load: Assuming approximately 50 minutes per load.
- Total Time: 50 minutes.
Hydroseeder Options & Add-Ons!
Manuals & Documents
General Warranty Info:
- Ripping It Outdoors works closely with our manufacturers to supply and support your products warranty needs as best as possible!
- The majority of products come with a manufacturer represented warranty against manufacturing defects for at least a 12 month period after the date of sale.
- Expendable components and "wear parts" including but not limited to blades, knives, teeth, oil, chain sprockets, skid shoes, knife mounting discs, and similar components are usually excluded from manufacturer warranties.
- Please reach out to us for any specific warranty information neededabout products and parts you can’t find!
Videos
Shipping
General Shipping Info:
- Instantly calculate shipping quotes to the lower 48 states by 1. adding this product to your cart, 2. click continue to the checkout page and 3. enter your shipping address to check rates. Contact us for quotes for shipping to Hawaii, Alaska, Canada, Mexico and Internationally.
- Complimentary lift gate service on all freight shipments where it’s possible. We guarantee safe delivery!
- Low shipping rates for customers. We have negotiated the best possible rates for customers from our trusted carriers (ODFL, ESTES, UPS, and FedEx).
- Negotiate shipping rates if you think we can do better please reach out. Keep in mind some shipping rates also include assembly & configuration as well!