Couldn't load pickup availability
Couldn't load pickup availability
Dare we say the “The Beast” of all cutters? This fierce cutting machine is not for the faint-hearted. We beefed up the direct-drive piston motor and paired it with a massive 3.25” shaft diameter bearing housing for extreme cutting power. The unique “v-notch” design delivers a closer cut and operator precision when leveling trees and saplings. And by trees, we mean 10” thick trees. We then demanded the most robust blade carrier system on the market (there are two to choose from), so you’ll get the performance and power to master the toughest, most demanding jobs.
| Image | Description |
|---|---|
 |
Long-Lasting BladesThe Brush Wolf industrial-strength blades are heat treated, have a milled edge, and are Supertuf coated to stand the test of time. |
 |
Direct-Drive Piston MotorExperience the power of the direct-drive SAI® radial piston motor. With higher torque, you’ll get more cutting power, quicker recovery time, and less bogging down when accelerating through thick brush. |
 |
Massive Bearing HousingWe pair our direct-drive radial piston motor with a robust Eskridge® bearing housing that has a 3.25” shaft diameter and patented shaft retention system. |
 |
Motor ProtectionPressure Relief Valves: Added pressure relief valves safeguard your motor from pressure spikes and allow for a faster shutdown. Case Drain is included to relieve excess pressure build-up and protect the motor. |
 |
Gearbox Seal ProtectionA welded seal guard collar prevents wire, twine, and vegetation from wrapping around and damaging the gearbox. |
 |
Ultra-Rugged Deck FrameHere’s why our brush cutters last for life. We build each deck frame from a single piece of formed 1/4" thick heavy-duty steel, never pieced together. This means our frames are consistently better made and more durable, with the elimination of construction errors and frame failure. One-piece frames will always provide superior strength. |
 |
Clean Deck DesignOur one-piece deck frame construction creates a “clean deck” design that allows material to glide off, preventing unwanted debris buildup. (Think less mess and easier to clean.) |
 |
Seam WeldingUnlike our competitors, Brush Wolf’s deck and frame construction is fully boxed and continuously welded across each seam for an indestructible, rust-proof support structure. |
 |
Reinforced GussetsWe went above and beyond to make sure our cutters are crazy strong by adding boxed-in gusset reinforcements, extra bracing, and supports. |
 |
Powder-Coated ToughProtected with the most durable finishing process, we powder coat every part to minimize rust, resist scratches, and prevent fading, so you get more life out of your brush cutter. |
 |
Push BarMassive, fully-supported serrated push bar with teeth to bite into anything in its way. |
 |
Blade Access CoverEasy access to the blade bolts for quick blade replacement. |
 |
Plug + Play ReadyEverything is ready to go upon delivery with the included quick-connect couplers, 114" hydraulic hoses encased in protective wrap, and dust caps to prevent line contamination. |
 |
Advanced Hose Routing SystemWe took the time to devise a well-thought-out hose routing system based on real-life situations. Using guides and STAUFF clamps, our hydraulic lines can be routed to either side. So, you choose which side works best for your machine. |
 |
Protected Hydraulic HosesOur ALPHA hydraulic hoses are guarded with extreme-duty spiral hose wrap to stave off entanglements from branches and keep you cutting. |
 |
HoodThe vented hood fully encloses the motor and drive components to shield them from damaging impacts and debris. |
 |
Deflector PlateWe upped the safety by adding a deflector plate to control the discharged material coming out of the front of the deck to protect both people and nearby structures. |
 |
Safety StepsEnhancing safety is our thing, so we added two non-slip, serrated metal steps for easy in and out. |
 |
Universal Quick Attach SystemTime is money, so we made sure our cutters attach quickly to your machine by using the industry-standard Quick Attach system. It will only take seconds to attach/detach your machine with our universal pick-up plate. |
 |
Choose Your ColorBlack, yellow, or make it your own custom color. |
| Specification | ALPHA HD (3-Blade Carrier) | ALPHA HD (4-Blade Carrier) |
|---|---|---|
| Flow Type | 3-Blade Carrier | 4-Blade Carrier |
| Cutting Width | 72 in | 72 in |
| Hydraulic Flow Range | 23–32 GPM | 23–32 GPM |
| Max Cutting Diameter | 10 in | 10 in |
| Tip Speed | 10,300–14,300 ft/min | 10,300–14,300 ft/min |
| Overall Width | 75.25 in | 75.25 in |
| Overall Length | 82 in | 82 in |
| Weight | 2,320 lbs | 2,570 lbs |
| Specification | ALPHA XP (3-Blade Carrier) | ALPHA XP (4-Blade Carrier) |
|---|---|---|
| Flow Type | 3-Blade Carrier | 4-Blade Carrier |
| Cutting Width | 72 in | 72 in |
| Hydraulic Flow Range | 33–45 GPM | 33–45 GPM |
| Max Cutting Diameter | 10 in | 10 in |
| Tip Speed | 13,200–18,000 ft/min | 13,200–18,000 ft/min |
| Overall Width | 75.25 in | 75.25 in |
| Overall Length | 82 in | 82 in |
| Weight | 2,320 lbs | 2,570 lbs |
Overall rating: 4.7 / 5 from 107 reviews.
I've started using the mulcher I on several parcels of land 10 acres . I have grind down a couple of 14 inch stumps. Caution the mount bracket behind the mulcher motor exhaust gets extremely hot even with gloves on . But the unit so far seems to works very good it's well put together.
Forax Gas Powered Mulcher | Model GP40 | 40" Cutting Width | 14HP Kohler | For Tractors
The Firminator G3 is s heavy duty quality machine. The discs worked extremely well and planting and culti-packing is very smooth and easy. Working with Dillon at Ripping It Outdoors was a very good experience and seamless transaction.
Product was fairly priced and they delivered it quickly.
Totally dig this forestry mulcher! It’s a true beast that munches up stumps and trees
Forax Gas Powered Mulcher | Model GP40 | 40" Cutting Width | 14-15 HP | For Tractors
The week before leaving for my mule deer hunt in Wyoming, I seeded the area surrounding the new runway at Wertheimer Airport in Norman. This past Tuesday, I returned to finish the job and was pleased to see that the seed I planted just two weeks earlier was already germinating and coming up nicely. These pictures show the freshly seeded areas alongside those planted two weeks ago. It’s a great comparison and a good example of what proper seedbed preparation and planting can accomplish. I used my Ferminator G-3, which is one impressive piece of equipment. It prepares the seedbed, plants the seed, smooths the soil, and firms everything up for good seed-to-soil contact—all in one efficient operation. I’ve owned and operated several no-till drills over the years, but I can say without hesitation that the Ferminator is the most efficient and versatile seeding machine I’ve ever owned. There’s something pretty satisfying about returning to a job and seeing those first green shoots coming through the ground. That’s when you know your hard work is paying off!
Pulls 100% better no sway and puts tongue weight over the axle
BP Conversions Bumper Puller Ball Hitch to Gooseneck Conversion System
Great machine. Working with Dillon was awesome. Even made me a custom mount for my Polaris.
Just got my Buffalo Turbine! Love it. Took a little bit to get used to getting the right angle for the nozzle, but not a problem. Side note, works much better if the frame is level as much as possible. Love it! Gary Haddock
Seems to be in order delivery wasn't able to use lift gate but tractor was able to take pallet off the truck bed. No damage to machine after visual check. won't know how it runs until rain stops. Staff at RippingitOutdoors was very quick to call and double check the type of backet needed for the unit to ensure the online order matched( to fit my skid steer quick attachment on my l2501 Kubota). Explained the teeth & belt could be ordered through them directly over the phone when/if needed as well as selling other types of custom made brackets for Utv's ect. All around Great customer service and would purchase from again.
Forax Gas Powered Mulcher | Model GP40 | 40" Cutting Width | 14-15 HP | For Tractors
Great device. Makes my property look good.
The machine is a Land Shark! Gobbled up brush and small trees and turned them into mulch in no time!
Forax Gas Powered Mulcher | Model GP40 | 40" Cutting Width | 14-15 HP | For Tractors
The unit arrived within the timeframe that was given. It’s an amazing implement. Would definitely recommend
Forax Gas Powered Mulcher | Model GP40 | 40" Cutting Width | 14HP Kohler | For Tractors
Hay rake works great. It’s a good value for the money. Ripping it outdoors was beyond helpful during the purchase!
Farm-Maxx Rotary Hay Rake | Model FRM-280 | Working Width 110" | 20+ HP | For Tractors
After spending way to much money for forest mulching services I discovered this wonderful machine. It's not a giant powerhouse forest mulcher, but it does everything a property owner needs to maintain a forested property. I wish I would have found it sooner.
Forax Gas Powered Mulcher | Model GP40 | 40" Cutting Width | 14HP Kohler | For Tractor
I wasn't sure what to expect, but it has proven to be a strong, durable, and terribly useful tool for clearing what I needed to clear. Thank you!
Works great and its easy to use.
Forax Gas Powered Mulcher | Model GP40 | 40" Cutting Width | 14HP Kohler | For Tractors
Love it . Now I am going to have to get a new tractor and a Lane Shark.
Baumalight MP330 Brush Mulcher | Cutting Path 30" | 15-40 HP | For PTO On Tractors
The Firminator is well built and functions well. I am having some trouble while planting mixed size seeds. Next time out I’ll try setting it so only the smaller seeds drop out the open it up for the larger seeds.
easy buying process and great communication. Mulcher works great, easily clears overgrown brush and even mulched a 5" thick mulberry tree fairly easily. running it off of my old 331 bobcat with no problem powering the drum at all. Only small issue which isn't a big deal is that the supplied hoses are about 16" too short to operate a full range of motion.
The Firmanator works great very well built .I am very happy I made this purchase.
This trap seems to be kinda hard to set off.
Works excellent and is very well made.
Over all built well. I like it is all cast iron and metal and not plastic. Had to modify fertilizer disc mount to fit correctly, nothing major, a little grinding. I modified the center link hitch point to accommodate my John Deere quick hitch. Have yet to plant with it but I’m sure it will work perfect. Love the grease fittings everywhere. Reminds me of the old farm equipment I grew up on, and still use periodically.
My firminator RT was delivered in good condition in ND. I will be using it next week. I have a 45 HP John Deere tractor that is supposed to lift 2000 lb but really struggles to lift this 6 foot firminator RT. I will just have to use in as a two pass operation for now. I do wish there was a better operating manual for this unit. Maybe that is something you can work on. I will give you an update once I start using it in a few days.
Great piece of equipment. Performs far better than I expected. One piece of advice - if property is significantly overgrown, consider the tractor attachment first to bring down the over growth and then switch to the UTV attachment to maintain property. No complaints worked perfectly.
Ordered a 36” clean out bucket for my mini excavator. Love it, welds are great. Works as it should.
Showed up on time and I will be using it to put in 15 acres of food plots in this weekend!
Great experience. Easy transaction and fast shipping. The blade is built well and heavy duty.
Very good
Rammy 48", 55" & 61" ATV Snowblower 120/140/155 Professional Series SERIES 420CC Engine | For ATV
I like the mudder shoes. Looking forward to using them!
Forestry Supplies Mudder Boots | Mud & Snow Shoes | Float On Mud | One Size Fits All
Works as expected
seeds come out way to fast at lowest setting when planting alfalfa literally the only reason I bought it now I can't even use it and I can't return it so I'm stuck with it for the price you pay you would think it would work!
It’s built solid. It handles Field grass hip high pretty well. With the maintaining the field grass after the first cut, the pasture field is starting to look like a lawn. The 84 inch with the best thing to get for 8 acres. It’s best to order belts for back up in the event if the belts were to break. But overall, I like the product quality is good.
Farm-Maxx Grooming Mower | FMR Series | Working Width 48", 60", 72" & 84" | 15-50 HP | For Tractors
Definitely a better unit than you can find locally. I've ran several spreaders. This is by far the best.
When I think of ripping it outdoors something else comes to mind, but I digress. This spreader is awesome. Works like a champ. The hopper is big enough to do my 1 acre lot for my applications. Just load once and go. I would highly recommend this spreader. It saves a ton of time and is a quality product.
the way it was built is hefty and looks to be easy to operate
Rammy 48", 55" & 61" ATV Snowblower 120/140/155 Professional Series SERIES 420CC Engine | For ATV
good experience
Farm-Maxx Snow-Blowers | FSNB Series | Working Width 54", 68" & 74" | 15-50 HP | For Tractors
Very smooth experience fantastic Equipment delivered on time, actually ahead of time. Great product looking forward to the results.
A good product !
Field Tuff 125 lb. Receiver Mount Spreader – 12V | Towing Power 15–25 HP | For ATVs, UTVs & Tractor
Looks great will use it this weekend
CL Fabrication Adapters | Multiple Styles | Universal Compatibility | Heavy-Duty Construction
