RAMMY 48", 55" & 61" ATV SNOWBLOWER 120/140/155 PROFESSIONAL SERIES 420CC ENGINE

DESCRIPTION

The Rammy ATV Snowblower allows you to easily clear snow on any surface, from pavement to gravel, or even grass areas. As a single stage snowblower, the Rammy snowblower is compact and allows your ATV to remain agile, even while blowing snow.

• Each snowblower has electric controls for chute rotation and deflector angle.
• Due to its streamlined design, the Rammy can be installed or uninstalled in about 2 minutes (after the initial setup and mounting).
• The Rammy snowblower includes a control box that will mount to your ATV. However, the control box is only wired to the Rammy – no connections to your ATV are necessary. The control box houses the switches to control chute rotation and deflector angle, as well as an engine kill switch.
• Two wings sets are available to upgrade the snow clearing capacity. The 140 wing set increases the clearing width from 47.25 inches (120 cm), to 55 inches (140 cm). The 155 wing set upgrades its clearing width to 61 inches (155 cm).
• The Rammy ATV Snowblower can either be powered by a Briggs & Stratton Professional series 420 cc engine. This engine includes electric start.
• The Rammy snowblower mounts with your existing center mount snowplow brackets. However, your ATV needs a winch to raise and lower the snowblower between mowing and transport positions. We also recommend using about 100 lb (45.36 kg) of ballast weight on the rear rack of your ATV. This will help offset the added weight of the Rammy.
• Additionally, you can tighten your front springs (if adjustable) and adjust your front tire pressures to help alleviate the extra weight on the suspension. If your ATV has a soft front suspension, it would benefit from having heavy duty springs or spring inserts installed.
• One thing to note is that the weight is only on the suspension in transport position. When blowing snow, the weight of the Rammy is on the ground via its adjustable skid shoes.
• Mounting varies based on brand and model of ATV/UTV and the mounting bracket used on your machine. We cannot guarantee that the Rammy will mount without needing to make modifications to your ATV/UTV’s mounting bracket or front panel.
• The Rammy’s standard mounting system uses two 10 mm pins, which connect the subframe / push tubes to the mounting bracket on your ATV/UTV. These need to be used with a 10 mm clearance pinhole on the mounting bracket. Using these pins in a hole that is not designed for 10 mm pins (i.e. too large, or too small), can and will cause damage to the subframe. This may lead to further damage to the Rammy and/or your ATV/UTV.
• If your bracket/mounting system is not compatible with the 10 mm pins, the Rammy Lock Hook set is an alternative option for mounting.

We stay stocked on spare parts for all Rammy machines at our warehouse in Wisconsin. If you have service questions, need after sales support, or would like to order spare parts, please contact the dealer you purchased your machine from.

SPECIFICATIONS

RAMMY ATV SNOWBLOWER 120

RAMMY ATV SNOWBLOWER 140

RAMMY ATV SNOWBLOWER 155