The ACR ResQFlare is a high intensity LED Electronic Distress Flare. Sold with the included daytime distress flag, the ResQFlare and accompanying flag are certified to meet the applicable U.S. Coast Guard requirements allowing them to be carried in lieu of traditional pyrotechnic flares (U.S. only). As a convenient alternative to pyrotechnic flares, the ResQFlare provides 360° visibility for over 6 miles and its efficient design allows for substantial operational life (burn time), drastically increasing your chances of survival and rescue.Â
The ResQFlare facilitates rescue by emitting the flash characteristic for the International Morse Code for S-O-S. Operating on just two user-replaceable C-Cell Alkaline batteries, the ResQFlare’s high-efficiency electronics allow it to maintain the USCG required 75 cd peak equivalent fixed intensity for over 20 hours (more than 3 times longer than the USCG requirement for maintaining this level of light intensity). With its user-replaceable battery power source, the ResQFlare provides years of service while also negating common inconveniences of pyrotechnic flares including their expiry dates and stringent mandatory disposal requirements.
Meeting the requirements of 46 CFR 161.013, the ResQFlare is classified as an approved Night Visual Distress Signal. Given that a Distress Flag, meeting the requirements of 46 CFR 160.072, is included in the package with every ResQFlare, users are also provided with an approved Day Visual Distress Signal (the requirement for carriage of approved day and night visual distress signals can be found in 33 CFR part 175).
The supplied Distress Flag provides numerous daylight signaling options. The flag can be flown by attaching to the mast or simply hoisting to the highest possible point. It can also be displayed by hand, tied to, and then waved on items such as a boat hook, paddle, or fishing rod, or it can be laid flat on the deck to attract aircraft. The flag should be used only as a day signal and when displayed correctly, the black square should be over the black circle.
Carriage of the ResQFlare and Distress Flag together allows boaters to forego the requirement for traditional pyrotechnic flares when on vessels up to 65’ in length, boating on the Great Lakes, within 12 miles of U.S. waters, or on any body of water with a passageway to the sea at least two miles wide. Vessels less than 16’ are not required to carry a Day Visual Distress Signal but must still carry a Night Visual Distress Signal, making the ResQFlare a more than viable alternative to pyrotechnic flares for vessels of this size as well.
The addition of the ResQFlare to ACR’s line of boating safety gear provides U.S. recreational boaters with a comprehensive distress signaling solution.  When paired with an ACR EPIRB or Personal Locator Beacon, USCG rescue personnel not only know where you are within minutes but also have a visual reference light to home in on from up to 6 miles away.
NOTE: The ResQFlare (model: LNK-ERS1) is listed on the U.S. Coast Guard website as ACR ResQFlare (Model LNK-ERS1).
Features & Benefits:
ResQFlare and included Distress Flag, when carried together, qualify as a replacement for the carriage of USCG pyrotechnic flares (the U.S.A. only)
Bright light in all directions (360° visibility)
Lightweight and compact in size
Automatically rights itself and floats when in the water (no buoyancy/flotation ring necessary)
Certified under USCG 161.013 as a Nighttime Visual Distress Signal
Includes Distress Flag (Certified under USCG 160.072 as Daytime Visual Distress Signal)
ResQFlare Benefits vs. Traditional Pyrotechnic Flares:
No expiration date
Family safe (no burning flame)
Easy to operate (so even your kids and first-time boaters can operate it in the event of an emergency)
No issues with the existing stringent mandatory disposal requirements for pyrotechnic flares (legally considered as hazardous materials)
Waterproof and Buoyant
One-time purchase (less cost over the life of the product)
WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Brochure (pdf)
I've started using the mulcher I on several parcels of land 10 acres . I have grind down a couple of 14 inch stumps. Caution the mount bracket behind the mulcher motor exhaust gets extremely hot even with gloves on . But the unit so far seems to works very good it's well put together.
The Firminator G3 is s heavy duty quality machine. The discs worked extremely well and planting and culti-packing is very smooth and easy. Working with Dillon at Ripping It Outdoors was a very good experience and seamless transaction.
The week before leaving for my mule deer hunt in Wyoming, I seeded the area surrounding the new runway at Wertheimer Airport in Norman.
This past Tuesday, I returned to finish the job and was pleased to see that the seed I planted just two weeks earlier was already germinating and coming up nicely.
These pictures show the freshly seeded areas alongside those planted two weeks ago. It’s a great comparison and a good example of what proper seedbed preparation and planting can accomplish.
I used my Ferminator G-3, which is one impressive piece of equipment. It prepares the seedbed, plants the seed, smooths the soil, and firms everything up for good seed-to-soil contact—all in one efficient operation.
I’ve owned and operated several no-till drills over the years, but I can say without hesitation that the Ferminator is the most efficient and versatile seeding machine I’ve ever owned.
There’s something pretty satisfying about returning to a job and seeing those first green shoots coming through the ground. That’s when you know your hard work is paying off!
Just got my Buffalo Turbine! Love it. Took a little bit to get used to getting the right angle for the nozzle, but not a problem. Side note, works much better if the frame is level as much as possible.
Love it!
Gary Haddock
Seems to be in order delivery wasn't able to use lift gate but tractor was able to take pallet off the truck bed. No damage to machine after visual check. won't know how it runs until rain stops.
Staff at RippingitOutdoors was very quick to call and double check the type of backet needed for the unit to ensure the online order matched( to fit my skid steer quick attachment on my l2501 Kubota). Explained the teeth & belt could be ordered through them directly over the phone when/if needed as well as selling other types of custom made brackets for Utv's ect. All around Great customer service and would purchase from again.
After spending way to much money for forest mulching services I discovered this wonderful machine. It's not a giant powerhouse forest mulcher, but it does everything a property owner needs to maintain a forested property. I wish I would have found it sooner.
The Firminator is well built and functions well. I am having some trouble while planting mixed size seeds. Next time out I’ll try setting it so only the smaller seeds drop out the open it up for the larger seeds.
easy buying process and great communication. Mulcher works great, easily clears overgrown brush and even mulched a 5" thick mulberry tree fairly easily. running it off of my old 331 bobcat with no problem powering the drum at all. Only small issue which isn't a big deal is that the supplied hoses are about 16" too short to operate a full range of motion.
Over all built well. I like it is all cast iron and metal and not plastic. Had to modify fertilizer disc mount to fit correctly, nothing major, a little grinding. I modified the center link hitch point to accommodate my John Deere quick hitch. Have yet to plant with it but I’m sure it will work perfect. Love the grease fittings everywhere. Reminds me of the old farm equipment I grew up on, and still use periodically.
My firminator RT was delivered in good condition in ND. I will be using it next week. I have a 45 HP John Deere tractor that is supposed to lift 2000 lb but really struggles to lift this 6 foot firminator RT. I will just have to use in as a two pass operation for now.
I do wish there was a better operating manual for this unit. Maybe that is something you can work on.
I will give you an update once I start using it in a few days.
Great piece of equipment. Performs far better than I expected. One piece of advice - if property is significantly overgrown, consider the tractor attachment first to bring down the over growth and then switch to the UTV attachment to maintain property. No complaints worked perfectly.
Very pleased. Product was better than anticipated and is working well.
I expect the 2000lb feeders to last at least a decade based on my use with cattle.
If feeding wild game would likely last a lifetime with minimal maintenance.
seeds come out way to fast at lowest setting when planting alfalfa literally the only reason I bought it now I can't even use it and I can't return it so I'm stuck with it for the price you pay you would think it would work!
It’s built solid. It handles Field grass hip high pretty well. With the maintaining the field grass after the first cut, the pasture field is starting to look like a lawn. The 84 inch with the best thing to get for 8 acres. It’s best to order belts for back up in the event if the belts were to break. But overall, I like the product quality is good.
When I think of ripping it outdoors something else comes to mind, but I digress. This spreader is awesome. Works like a champ. The hopper is big enough to do my 1 acre lot for my applications. Just load once and go. I would highly recommend this spreader. It saves a ton of time and is a quality product.