1 1

ANDERSEN

ANDERSEN 40ST E1 Electric FS Winch - 24V [RA2040011400]

ANDERSEN 40ST E1 Electric FS Winch - 24V [RA2040011400]

$3,883.30
$4,314.78 $3,883.30
Sale Sold out
Customizable
Fast
24/7 Support

40ST E1 Electric Full Stainless Winch - 24V

Andersen E1 Electric Winches allow you to hoist and trim sails of any size at the push of a button. They remove the requirement for physical strength, making it possible for any crew member to easily and safely control lines and sails. Perfect for enjoying sailing short-handed or with friends and family.

In addition to the host of standard features that have made Andersen self tailing winches the benchmark for quality and performance Andersen E1 Electric Winches are engineered with unsurpassed levels of functionality, monitoring and protection.

Ease of Installation
Internal contractors and controller, with no separate control box required, mean a more reliable, neater and lighter installation. Simplified electrical installation requires just the connection of positive and negative power cables to the motor terminals and the connection of the push button using the included output cable. Marine grade circuit breakers are also available for protection and isolation.

Efficient, high quality motor
At the heart of the E1 winch is a high quality European engineered and manufactured series wound motor. Carefully matched with the optimal gearbox they deliver high speed at low load for fast sheeting in, and low speed at high load for safe, fine tuning when trimming. They are available in 12 Volt and 24 Volt models providing smooth and quiet operation across a wide working load range.

Illuminated “intelligent” Push Button
E1 winches are supplied with push button with integrated LED which illuminates when power to the winch system is on. The push button incorporates a hinged safety cover to prevent inadvertent winch operation and is water resistant rated to IP67. The push button also acts with the controller to flash status codes that assist with trouble shooting in the event of overload or where other system protection intervention occurs. A cable for connection of the push button is included for convenient installation.

Unrivalled level of monitoring and protection:

  • Integrated Overload Protection - The controller is pre-set to stop the winch if the Maximum Pull Load is exceeded. Operation can resume within a few seconds when the load returns below the limit
  • Thermal Overload Protection – The motor is fitted with a thermal cutout that disables the motor in case of overheating; it automatically resets after the temperature returns to normal.
  • Reverse Polarity Protection – An integrated 5 Amp fuse protects the motor against incorrect cable connection.
  • Accidental Start Protection – Winch operation is disabled if the push button is already inadvertently pressed when the power supply is turned on at the circuit breaker or battery.
  • Low Voltage Detection - Operation is disabled if the battery charge level is low, which prevents further drain on batteries and avoids triggering low-voltage reset of navigation instruments and other electronic devices.
  • Continuous Run Time Limit– Operation is disabled if continuous run time exceeds 10 minutes.

Manual operation
2-speed manual operation is always available as a backup; to winch beyond the pre-set maximum pull load (but below the winch Max Working Load) or just for the experience. 

Specifications

  • Drum: 2-15/16 in. (75 mm)
  • Base: 4-15/16 in. (152 mm)
  • Height: 7-1/16 in. (180 mm)
  • Line Entry: 3-1/8 in. (79 mm)
  • Line Size: 5/16-9/16 in. (8-14 mm)
  • Weight: 39.7 lbs. (19 kg)
  • Max Deck Thickness: 1-15/16 in. (49 mm)
  • Motor Depth: 7-3/16 in. (183 mm)
  • Gear Length: 2-9/16 in. (65 mm)
  • Motor Length: 11-13/16 in. (300 mm)





Quick Guide (pdf)
View full details

Customer Reviews

Overall rating: 4.7 / 5 from 107 reviews.

Customer photo review of Ranew Outdoors Firminator G3 Planter 4ft, 5ft, 6ft & 8ft | 3 in 1 Food Plot Implement | 3pt Planter | Discs, Seeder & Cultipacker | For Tractor

The week before leaving for my mule deer hunt in Wyoming, I seeded the area surrounding the new runway at Wertheimer Airport in Norman. This past Tuesday, I returned to finish the job and was pleased to see that the seed I planted just two weeks earlier was already germinating and coming up nicely. These pictures show the freshly seeded areas alongside those planted two weeks ago. It’s a great comparison and a good example of what proper seedbed preparation and planting can accomplish. I used my Ferminator G-3, which is one impressive piece of equipment. It prepares the seedbed, plants the seed, smooths the soil, and firms everything up for good seed-to-soil contact—all in one efficient operation. I’ve owned and operated several no-till drills over the years, but I can say without hesitation that the Ferminator is the most efficient and versatile seeding machine I’ve ever owned. There’s something pretty satisfying about returning to a job and seeing those first green shoots coming through the ground. That’s when you know your hard work is paying off!

Thomas P. 5/5

Ranew Outdoors Firminator G3 Planter 4ft, 5ft, 6ft & 8ft | 3 in 1 Food Plot Implement | 3pt Planter | Discs, Seeder & Cultipacker | For Tractor

Customer photo review of Forax Gas Powered Mulcher | Model GP40 | 40" Cutting Width | 14-15 HP | For Tractors

Seems to be in order delivery wasn't able to use lift gate but tractor was able to take pallet off the truck bed. No damage to machine after visual check. won't know how it runs until rain stops. Staff at RippingitOutdoors was very quick to call and double check the type of backet needed for the unit to ensure the online order matched( to fit my skid steer quick attachment on my l2501 Kubota). Explained the teeth & belt could be ordered through them directly over the phone when/if needed as well as selling other types of custom made brackets for Utv's ect. All around Great customer service and would purchase from again.

Dwayne G. 5/5 Verified

Forax Gas Powered Mulcher | Model GP40 | 40" Cutting Width | 14-15 HP | For Tractors

Customer photo review of Ferntree Mini Excavator Forestry Mulcher | Model FF-L Series | 22"-30" Cutting Width | Machine Size 2.5- 6 Ton | For Mini Excavator

easy buying process and great communication. Mulcher works great, easily clears overgrown brush and even mulched a 5" thick mulberry tree fairly easily. running it off of my old 331 bobcat with no problem powering the drum at all. Only small issue which isn't a big deal is that the supplied hoses are about 16" too short to operate a full range of motion.

Clint S. 5/5 Verified

Ferntree Mini Excavator Forestry Mulcher | Model FF-L Series | 22"-30" Cutting Width | Machine Size 2.5- 6 Ton | For Mini Excavator

Over all built well. I like it is all cast iron and metal and not plastic. Had to modify fertilizer disc mount to fit correctly, nothing major, a little grinding. I modified the center link hitch point to accommodate my John Deere quick hitch. Have yet to plant with it but I’m sure it will work perfect. Love the grease fittings everywhere. Reminds me of the old farm equipment I grew up on, and still use periodically.

Curtis L. 4/5 Verified

Cole 12 MX Multiflex Planter | Model B46-664A / 0120103 | Width 13" | Size: One Row | 3PT Hitch Planter Attachment | Horsepower 25–45 HP | For Tractor

My firminator RT was delivered in good condition in ND. I will be using it next week. I have a 45 HP John Deere tractor that is supposed to lift 2000 lb but really struggles to lift this 6 foot firminator RT. I will just have to use in as a two pass operation for now. I do wish there was a better operating manual for this unit. Maybe that is something you can work on. I will give you an update once I start using it in a few days.

John L. 5/5 Verified

Ranew Outdoor Firminator Rototiller | RT Series | Working Width 4', 6' & 8' | Tiller, Seeder & Cultipacker | Horsepower 24–55 HP | For Tractors

It’s built solid. It handles Field grass hip high pretty well. With the maintaining the field grass after the first cut, the pasture field is starting to look like a lawn. The 84 inch with the best thing to get for 8 acres. It’s best to order belts for back up in the event if the belts were to break. But overall, I like the product quality is good.

Richard C. 5/5 Verified

Farm-Maxx Grooming Mower | FMR Series | Working Width 48", 60", 72" & 84" | 15-50 HP | For Tractors

When I think of ripping it outdoors something else comes to mind, but I digress. This spreader is awesome. Works like a champ. The hopper is big enough to do my 1 acre lot for my applications. Just load once and go. I would highly recommend this spreader. It saves a ton of time and is a quality product.

Chip M. 5/5 Verified

BEFCO | Baby-Hop Pull-Type Broadcast Spreader | Model 103 & 106 Series | 237–339 lb Capacity | 3′–20′ Spread Width | Horsepower 10 To 20 HP | For Lawn Tractors, ATVs & UTVs