Built so you can move freely and boat confidently, the Garmin OnBoard system uses wireless tags instead of traditional tethered cords — integrating with your compatible Garmin chartplotter.
Tags are worn on the wrist, a carabiner, or a key ring float
Tags are designated as either captain or passenger
Set the MOB tag as captain to enable engine cutoff
Temporarily unprotect tags with ease
The GOS 10 hub includes a loud external alarm
The tag battery life exceeds a season of typical use
Captain Tag
Captain MOB detection will trigger engine cutoff, a MOB waypoint on the chartplotter, and an audible alarm on the MFDs and hub.
Wireless: No Strings Attached
The wearable MOB tags are part of a wireless MOB system - letting you move untethered while still being monitored.
Passenger Tag
Passenger MOB detection will trigger a MOB waypoint on MFDs plus an audible alarm on the MFDs and hub.
Engine Cutoff System
Should a captain tag trigger an MOB event, the system will cut power to the engines - letting the captain return to the vessel.
Captain or Passenger Tags
Through the Garmin chartplotter interface, you can designate each tag as either captain or passenger — changing their MOB action.
Waypoints
When paired to your compatible Garmin chartplotter, a waypoint will be marked at the location where the MOB tag lost connection with the vessel.
Audio Alarm
The GOS 10 hub includes a loud external alarm — alerting you to a MOB event.
Pair Multiple Tags
Provide peace of mind for up to 8 tags at a time.
Vast Compatibility
This product will work with any boat that has an engine cutoff switch.
What's In The Box?
GOS™ 10 Hub
12-pin fused power and engine cut-off harness with external buzzer
External antenna for wireless connection to MOB tags
NMEA 2000® tee and 6 ft drop cable
White wireless MOB tag
CR2032 coin cell battery
White 20 mm quick-release band
Carabiner with 20 mm quick-release attachment
Floating foam keychain
Installation hardware
Documentation
Specifications:
General:
Number of tags supported: 8 simultaneous passengers and captains
User Interface: Compatible Garmin Chartplotter
MOB Alarm: External beeper and MFD alert
Engine cutoff: Yes
View MOB details on MFD: Yes
View tag status on MFD: yes (battery life, signal strength, protection status)
Manage tags on MFD: yes (arm/disarm, captain/passenger)
Wireless engine kill: Yes
GOS™ 10:
Dimensions (HxWxD): 91.55 mm x 155.12 mm x 48.47 mm
Weight: 171.7 g
Wireless range: 66 ft (up to 20 m)
Supply voltage range: 10-32V
Operating temperature range: -15 °C to 70 °C
Typical power consumption: 50mA @ 12 V or 0.6 W
NMEA 2000 LEN®: 1
Engine compatibility: Inboard, outboard, sterndrive from all major manufacturers
Engine interface: Hardwired, in-line connection to ignition harness
Number of engines supported: Up to 4 close-to-stop or 2 open-to-stop engines
Water rating: IPX6 and IPX7
Compass-safe distance: 5 cm
MOB Tag:
Dimensions (HxWxD): 43.94 mm x 38.60 mm x 11.96 mm
Weight: 21.5 g
Wireless range: 66 ft (up to 20 m)
Battery type: CR 2032 coin cell
Battery life: > 1,200 hours of connected time
View tag status on MFD: yes (battery life, signal strength, protection status)
I've started using the mulcher I on several parcels of land 10 acres . I have grind down a couple of 14 inch stumps. Caution the mount bracket behind the mulcher motor exhaust gets extremely hot even with gloves on . But the unit so far seems to works very good it's well put together.
The Firminator G3 is s heavy duty quality machine. The discs worked extremely well and planting and culti-packing is very smooth and easy. Working with Dillon at Ripping It Outdoors was a very good experience and seamless transaction.
Just got my Buffalo Turbine! Love it. Took a little bit to get used to getting the right angle for the nozzle, but not a problem. Side note, works much better if the frame is level as much as possible.
Love it!
Gary Haddock
Seems to be in order delivery wasn't able to use lift gate but tractor was able to take pallet off the truck bed. No damage to machine after visual check. won't know how it runs until rain stops.
Staff at RippingitOutdoors was very quick to call and double check the type of backet needed for the unit to ensure the online order matched( to fit my skid steer quick attachment on my l2501 Kubota). Explained the teeth & belt could be ordered through them directly over the phone when/if needed as well as selling other types of custom made brackets for Utv's ect. All around Great customer service and would purchase from again.
After spending way to much money for forest mulching services I discovered this wonderful machine. It's not a giant powerhouse forest mulcher, but it does everything a property owner needs to maintain a forested property. I wish I would have found it sooner.
The Firminator is well built and functions well. I am having some trouble while planting mixed size seeds. Next time out I’ll try setting it so only the smaller seeds drop out the open it up for the larger seeds.
easy buying process and great communication. Mulcher works great, easily clears overgrown brush and even mulched a 5" thick mulberry tree fairly easily. running it off of my old 331 bobcat with no problem powering the drum at all. Only small issue which isn't a big deal is that the supplied hoses are about 16" too short to operate a full range of motion.
Over all built well. I like it is all cast iron and metal and not plastic. Had to modify fertilizer disc mount to fit correctly, nothing major, a little grinding. I modified the center link hitch point to accommodate my John Deere quick hitch. Have yet to plant with it but I’m sure it will work perfect. Love the grease fittings everywhere. Reminds me of the old farm equipment I grew up on, and still use periodically.
My firminator RT was delivered in good condition in ND. I will be using it next week. I have a 45 HP John Deere tractor that is supposed to lift 2000 lb but really struggles to lift this 6 foot firminator RT. I will just have to use in as a two pass operation for now.
I do wish there was a better operating manual for this unit. Maybe that is something you can work on.
I will give you an update once I start using it in a few days.
Great piece of equipment. Performs far better than I expected. One piece of advice - if property is significantly overgrown, consider the tractor attachment first to bring down the over growth and then switch to the UTV attachment to maintain property. No complaints worked perfectly.
Put this on Kubota 900 with winch hookup. This thing is a beast (within reason). I named it ‘Homie”, cause Homie don’t play. It will take care of stuff up to about 2” in diameter. You still have to remember that this is NOT like the ones on a bobcat or larger machinery. It does have its limits. But all in all I am very satisfied with it. Now on to the good part! The staff at Ripping It are outstanding! Especially Kayla in the office. She has gone above and beyond on making sure everything went right, from ordering to questions about installation. This young lady would be of great value at ANY company ! Her knowledge and personality are like over the top. This is my first experience with Ripping It Outdoors and I can only say positive things about them. With all that being said, I do fill out reviews on things I buy, AND I give a honest review. If it’s bad then you will know it. But if it’s good, well I tell the truth ! Again Kayla, from the bottom of my heart, a great big THANK YOU for all your help and just talking to you. I feel like we’ve know each other for years!
TENT is easy to put up , material is tuff as told....only complaint is that i wish the bottom had about 3 to 4 inches overlap towards the inside so i could install a 2 x4 or something to help hold the tent down in high winds we have here in virginia thanks
Hi, my name is Ken. I’ve had a great experience with Ripping It Outdoors. I purchased a Forax Hp40 Mulcher for my mini excavator. Kayla Patterson is who I dealt with from the beginning until I received it at my house. She has been wonderful to work with and looking forward to working with her with any other orders I purchase. Kayla answered any questions I had and kept me updated throughout the whole process, can’t say it enough just a wonderful person to work with!!
These are great feeders if you don’t have any feral hogs but if the hogs tear off the wiring harness from the timer to the feeder motor, you’re disabled. Then, if you ask for help from Outback, they refer you to the dealer but really you’re on your own for parts and repairs.
I have three Outback feeders that work as designed. They’re 13 years old and have always served well but this feeder misses the mark by a very high margin. I’d NEVER buy this product again.
Feeders need to be dependable and this unit is not.
This is my first experience with Ripping It Outdoors. Fortunately I got Dillion as a representative and everything from sales to shipping was spot on..
Thanks Dillion for your help!!