3MP Compact 316L Stainless Steel Thru-Hull/Panel IP Camera - 2.8mm Lens
Looking for a discrete backup or tender watch camera, covert security camera, or through hull/through transom camera? Look no further - the IRIS-S435 (IP) / S1435 (Analogue / Analogue HD) compact bullet-style camera is what you need.
Available in marine grade 316L stainless steel or anodized aluminum, the S435/S1435 is available as an IP camera (IRIS-S435) based on our best-selling S460 camera engine and also in analog/analog HD formats (IRIS-S1435).
The camera features built-in infrared LED illumination for close-range (10m) visibility in the dark and is supplied with 60° wedge adapters to enable you to angle the camera if necessary.
The IP version of the camera (IRIS435) is directly compatible with Raymarine, Navico (Simrad, B & G, Lowrance), and Furuno chart plotters. Compatibility with Garmin MFDs is achieved in conjunction with our CMAC camera management system for boats.
The analog/analog HD version of the camera can interface with all chart plotters supporting composite video in CVBS mode, and when switched to any of the three analog HD modes (AHD, TVI, CVI) interfaces either through our CMAC system or by using an Iris TVIHDMI convertor to provide HD resolution in real-time.
The camera can be supplied with 80°, 120°, and 154° lens options and is ONVIF profile S compliant.
Finally, with an IP68 environmental rating, the camera can also be used below the water line to keep an eye on running gear, film your fishing adventures, or even attached to a pole and used as an underwater inspection camera.
Features:
Available in IP or Analogue (CVBS, TVI, CVI, AHD) Formats
Machined from 316 Marine Grade Stainless Steel or Aluminum
3MP HD Resolution (IP Models)
2MP HD Resolution (Analogue Model (TVI, CVI or AHD mode)
SD Analogue (CVBS) format 1000TVL Resolution
Compatible with Raymarine / Axiom (LH2 and Higher)
Compatible with Furuno TZT / TimeZero 4.1
Compatible with Navico MFDs Inc. SIMRAD, Lowrance, and B & G
Compatible with CMAC for use with Garmin MFD’s
Built In Infra Red LED Illumination (8m Range)
PoE Option (IRISS460 IP Model)
Use Above or Below Water Level
IP68 Environmental Protection
Technical Specifications:
Format - IP
Resolution - 2304 x 1296
Horizontal Field of View - 120°
Interface - RJ45 10/100 Base T Ethernet / Setup through Browser
Video Processing - H.264 / H.265 Codec / Dual Stream (Main / Substream) 3 Instances Max
Protocol/Video Format - TCP/UDP/HTTP/Multicast/UPnP/NTP/RTSP/ONVIF
Onvif - Profile S v2.4
Bitrate - VBR / CBR 32kbps 8Mbps
Illumination - 6 x 850nm Infra Red - 10 meter Range / Available with White LED Illumination on Request
Mirroring - Horizontal & Vertical - Configure via Browser Interface
Operating Temperature - -30 - +60°
Connections - Water Resistant RJ45 Socket (Field Installable Backshell Supplied) / Non-PoE with 2.5mm DC Power Socket
Material - 316L Marine Grade Stainless Steel / Aluminum Option Available
I've started using the mulcher I on several parcels of land 10 acres . I have grind down a couple of 14 inch stumps. Caution the mount bracket behind the mulcher motor exhaust gets extremely hot even with gloves on . But the unit so far seems to works very good it's well put together.
The Firminator G3 is s heavy duty quality machine. The discs worked extremely well and planting and culti-packing is very smooth and easy. Working with Dillon at Ripping It Outdoors was a very good experience and seamless transaction.
The week before leaving for my mule deer hunt in Wyoming, I seeded the area surrounding the new runway at Wertheimer Airport in Norman.
This past Tuesday, I returned to finish the job and was pleased to see that the seed I planted just two weeks earlier was already germinating and coming up nicely.
These pictures show the freshly seeded areas alongside those planted two weeks ago. It’s a great comparison and a good example of what proper seedbed preparation and planting can accomplish.
I used my Ferminator G-3, which is one impressive piece of equipment. It prepares the seedbed, plants the seed, smooths the soil, and firms everything up for good seed-to-soil contact—all in one efficient operation.
I’ve owned and operated several no-till drills over the years, but I can say without hesitation that the Ferminator is the most efficient and versatile seeding machine I’ve ever owned.
There’s something pretty satisfying about returning to a job and seeing those first green shoots coming through the ground. That’s when you know your hard work is paying off!
Just got my Buffalo Turbine! Love it. Took a little bit to get used to getting the right angle for the nozzle, but not a problem. Side note, works much better if the frame is level as much as possible.
Love it!
Gary Haddock
Seems to be in order delivery wasn't able to use lift gate but tractor was able to take pallet off the truck bed. No damage to machine after visual check. won't know how it runs until rain stops.
Staff at RippingitOutdoors was very quick to call and double check the type of backet needed for the unit to ensure the online order matched( to fit my skid steer quick attachment on my l2501 Kubota). Explained the teeth & belt could be ordered through them directly over the phone when/if needed as well as selling other types of custom made brackets for Utv's ect. All around Great customer service and would purchase from again.
After spending way to much money for forest mulching services I discovered this wonderful machine. It's not a giant powerhouse forest mulcher, but it does everything a property owner needs to maintain a forested property. I wish I would have found it sooner.
The Firminator is well built and functions well. I am having some trouble while planting mixed size seeds. Next time out I’ll try setting it so only the smaller seeds drop out the open it up for the larger seeds.
easy buying process and great communication. Mulcher works great, easily clears overgrown brush and even mulched a 5" thick mulberry tree fairly easily. running it off of my old 331 bobcat with no problem powering the drum at all. Only small issue which isn't a big deal is that the supplied hoses are about 16" too short to operate a full range of motion.
Over all built well. I like it is all cast iron and metal and not plastic. Had to modify fertilizer disc mount to fit correctly, nothing major, a little grinding. I modified the center link hitch point to accommodate my John Deere quick hitch. Have yet to plant with it but I’m sure it will work perfect. Love the grease fittings everywhere. Reminds me of the old farm equipment I grew up on, and still use periodically.
My firminator RT was delivered in good condition in ND. I will be using it next week. I have a 45 HP John Deere tractor that is supposed to lift 2000 lb but really struggles to lift this 6 foot firminator RT. I will just have to use in as a two pass operation for now.
I do wish there was a better operating manual for this unit. Maybe that is something you can work on.
I will give you an update once I start using it in a few days.
Great piece of equipment. Performs far better than I expected. One piece of advice - if property is significantly overgrown, consider the tractor attachment first to bring down the over growth and then switch to the UTV attachment to maintain property. No complaints worked perfectly.
The seeder is GREAT! But the shipping was VERY POOR! Over $250 in shipping cost & the unit was in a poor quality cardboard box with no substantial packaging material. Several key components were bent. It was components that need to be straight for precision seeding. I’m disappointed ☹️ that a great product was so poorly packaged for shipping.
Very pleased. Product was better than anticipated and is working well.
I expect the 2000lb feeders to last at least a decade based on my use with cattle.
If feeding wild game would likely last a lifetime with minimal maintenance.
seeds come out way to fast at lowest setting when planting alfalfa literally the only reason I bought it now I can't even use it and I can't return it so I'm stuck with it for the price you pay you would think it would work!
It’s built solid. It handles Field grass hip high pretty well. With the maintaining the field grass after the first cut, the pasture field is starting to look like a lawn. The 84 inch with the best thing to get for 8 acres. It’s best to order belts for back up in the event if the belts were to break. But overall, I like the product quality is good.
When I think of ripping it outdoors something else comes to mind, but I digress. This spreader is awesome. Works like a champ. The hopper is big enough to do my 1 acre lot for my applications. Just load once and go. I would highly recommend this spreader. It saves a ton of time and is a quality product.