M200 Marine Subwoofer 10" with LED & Grey Sport Grille
Enhance your experience on the water with JL Audio M200 subwoofers, which bring M-series bass for less.
Features:
250-WATT RMS POWER HANDLING
RGB LED LIGHTING
LONG-EXCURSION DESIGN DELIVERS DEEP AND POWERFUL BASS
INTERCHANGEABLE GRILLE OPTIONS (SOLD SEPARATELY)
MARINE-GRADE CONSTRUCTION
BUILT TO IMPRESS
This 10-inch subwoofer features an injection-molded polypropylene cone and rubber surround with a marine-grade synthetic spider to keep the cone under control for tight bass response.
RGB LED LIGHTING
Enhance your audio experience with a wide spectrum of colors. Pair with the Garmin Spectra™ control module (sold separately) for advanced lighting control from your compatible chartplotter or the ActiveCaptain® app.
INCREDIBLE PERFORMANCE
With 250-watt RMS power handling and a long-excursion design, this subwoofer delivers powerful and deep bass with less distortion.
CUSTOMIZABLE GRILLE OPTIONS
Match the look of your vessel with white or gray color options along with interchangeable grilles (sold separately).
SALT AND SUN PROTECTED
Sail to your heart’s content knowing that your speakers are built from marine-grade materials and finishes with corrosion-resistant connections and circuit boards to withstand salt and sun.
INFINITE BAFFLE DESIGN
M200 marine subwoofers are purpose-engineered to operate without a dedicated enclosure, needing only a moderate amount of air behind them.
Mounting Dimensions:
Mounting depth clearance: 5.16" (131 mm)
Frontal grille protrusion: 1.85" (47 mm)
Mounting hole: 8.75" (222 mm)
Bolt hole circle: 9.72" (247 mm)
General:
Warranty: 3 years
Sizes: 10"
Color: Gray Sport
Physical dimensions (Diameter): 10.84" (275 mm)
Physical dimensions (Depth): 5.16" (131 mm)
Weight: 10.69 lbs (4.85 kg)
Water and dust rating: IPX6
Speaker type: Infinite Baffle Subwoofer
Continuous power handling (RMS): 250 W
Sensitivity (SPL @ 1 W/1 m): 86 dB
Nominal impedance: 4 Ω
Recommended amplifier power (RMS): 250 W
LED lighting: yes (RGB)
LED supply voltage: 10 - 14.4 VDC
LED load current @ 14.4 VDC (max): 220 mA
Cone material: Injection-molded, polypropylene
Compass-safe distance: 116" (295 cm)
Networking & Connections:
Speaker connections: Spade connectors
LED connection: Flying lead with waterproof connector, 4-conductor 20 AWG wire
I've started using the mulcher I on several parcels of land 10 acres . I have grind down a couple of 14 inch stumps. Caution the mount bracket behind the mulcher motor exhaust gets extremely hot even with gloves on . But the unit so far seems to works very good it's well put together.
The Firminator G3 is s heavy duty quality machine. The discs worked extremely well and planting and culti-packing is very smooth and easy. Working with Dillon at Ripping It Outdoors was a very good experience and seamless transaction.
After spending way to much money for forest mulching services I discovered this wonderful machine. It's not a giant powerhouse forest mulcher, but it does everything a property owner needs to maintain a forested property. I wish I would have found it sooner.
The Firminator is well built and functions well. I am having some trouble while planting mixed size seeds. Next time out I’ll try setting it so only the smaller seeds drop out the open it up for the larger seeds.
easy buying process and great communication. Mulcher works great, easily clears overgrown brush and even mulched a 5" thick mulberry tree fairly easily. running it off of my old 331 bobcat with no problem powering the drum at all. Only small issue which isn't a big deal is that the supplied hoses are about 16" too short to operate a full range of motion.
Over all built well. I like it is all cast iron and metal and not plastic. Had to modify fertilizer disc mount to fit correctly, nothing major, a little grinding. I modified the center link hitch point to accommodate my John Deere quick hitch. Have yet to plant with it but I’m sure it will work perfect. Love the grease fittings everywhere. Reminds me of the old farm equipment I grew up on, and still use periodically.
My firminator RT was delivered in good condition in ND. I will be using it next week. I have a 45 HP John Deere tractor that is supposed to lift 2000 lb but really struggles to lift this 6 foot firminator RT. I will just have to use in as a two pass operation for now.
I do wish there was a better operating manual for this unit. Maybe that is something you can work on.
I will give you an update once I start using it in a few days.
Great piece of equipment. Performs far better than I expected. One piece of advice - if property is significantly overgrown, consider the tractor attachment first to bring down the over growth and then switch to the UTV attachment to maintain property. No complaints worked perfectly.
These are great feeders if you don’t have any feral hogs but if the hogs tear off the wiring harness from the timer to the feeder motor, you’re disabled. Then, if you ask for help from Outback, they refer you to the dealer but really you’re on your own for parts and repairs.
I have three Outback feeders that work as designed. They’re 13 years old and have always served well but this feeder misses the mark by a very high margin. I’d NEVER buy this product again.
Feeders need to be dependable and this unit is not.
This is my first experience with Ripping It Outdoors. Fortunately I got Dillion as a representative and everything from sales to shipping was spot on..
Thanks Dillion for your help!!
The only thing is when hooking up the actuator on my ATV. The wire is long going to the plug in. What has happened in the past about this. Is their video showing the usage of the control?
I had a guy from a shop come cut the shafts and hook me up. It went well. I've been using the mulcher and the tractor saw on my two tractors and having fun.
i love it, i'm a little inexperianced with it but i'll learn, i've never messed with chemicals much.
instead of putting it on an atv, i put it on a skid steer
We bought a 6' G3 last year and it worked well. We were missing the handle for seed adjuster on 1st one and they next day aired it. Just ordered an 8 ' model to go with it. Dillon is great to work with. Hope this one works out as well.