Lucid Bots Window Washing Payload | Maximum Pressure 500 Psi | Dry Time 1-Minute
DESCRIPTION
The Window Washing Payload is tailored for efficient and professional-grade aerial window cleaning. Its innovative design ensures the safety and effectiveness of the cleaning process, emphasizing preparation, water quality, and optimal cleaning methods.
Best practices
1. Try not to clean in direct sunlight because it will cause the water and cleaning solutions to dry very quickly even if the temperature outside is low.
It is best to wash windows in the shade, or when the sun is low in the sky (ie, not as strong).
2. Water —> Cleaning Solution —> Water
It is best to apply water, then a cleaning solution, then rinse with water again.
Getting the windows wet before applying a cleaning solution enhances the cleaning powers of the cleaning solution and cools down the window. 3. Use clean, deionized water!
1. Make sure that your water is as clean as possible.
Do not use a dirty tank
2. Do not use a dirty hose
3. Do not use a dirty nozzle
4. Do not use a dirty pump
2. When possible, try to use deionized water with a dedicated hose and pump for water and water only. If you previously sprayed other chemicals or dirty water through that hose and pump, it won’t have as good of results.
4. Don’t allow the cleaning solution to dry on the windows.
For best results, let the cleaning solution sit on the windows for no more than 1 minute before rinsing.
5. Rinse from the top down!
6. Spend extra time on frames, as dirt, dust, and other debris can aggregate on these surfaces and might run down over the window after you’ve cleaned them.
7. It’s always a good idea to ground test the equipment you plan to use with the window washing payload to make sure it works well before you’re up in the air.
Things to keep in mind while using the window cleaning payload.
The injector valve might bring your flow rate down slightly, and using a low flow rate pump might cause the payload to not pull solution at height depending on the pump.
Some nozzles might restrict flow causing the payload not to pull the solution.
The window washing payload has a max pressure rating of 500 PSI if you use a higher pressure than this it might cause the payload to break.
The tubing inside the pinch valve might get stuck pinched shut if left in the valve for extended periods of time. There are extra lengths of tubing in your controller box to replace it with if this happens. (Here is a link to more if you need it)
Using different nozzles might change your dilution ratios slightly.
Empty and clean the window payload tank when storing or shipping the drone.
Key Features
Sunlight Avoidance: Prevent quick drying by cleaning in shaded areas or when the sun is low.
Three-Step Cleaning Process: Water → Cleaning Solution → Water ensures enhanced cleaning performance.
Use of Deionized Water: Promotes spotless results with dedicated hoses and pumps for clean water only.
Rinsing Best Practices: Rinse within one minute to prevent the cleaning solution from drying.
Top-Down Rinsing: Achieve streak-free results by following proper rinsing techniques.
Frame Cleaning: Extra care for dirt accumulation on window frames prevents debris runoff.
Ground Testing: Ensures all equipment functions well before drone operations begin.
Detailed Specifications
Item
Details
Max Pressure Rating
500 PSI (Do not exceed this pressure)
Recommended Water Type
Clean, deionized water only
Rinsing Direction
Top-down to avoid streaks
Cleaning Solution Dry Time
Rinse within 1 minute to prevent drying
Injector Valve Flow Rate Impact
May slightly reduce flow rate
Nozzle Restrictions
Use compatible nozzles to avoid flow issues
Pump Type
Ensure pump is compatible for height operation
Manuals & Documents
General Warranty Info:
Ripping It Outdoors works closely with our manufacturers to supply and support your products warranty needs as best as possible!
The majority of products come with a manufacturer represented warranty against manufacturing defects for at least a 12 month period after the date of sale.
Expendable components and "wear parts" including but not limited to blades, knives, teeth, oil, chain sprockets, skid shoes, knife mounting discs, and similar components are usually excluded from manufacturer warranties.
Please reach out to us for any specific warranty information needed about products and parts you can’t find!
Videos
Shipping
General Shipping Info:
Instantly calculate shipping quotesto the lower 48 states by1.adding this product to your cart,2.click continue to the checkout page and3.enter your shipping address to check rates. Contact us for quotes for shipping to Hawaii, Alaska, Canada, Mexico and Internationally.
Complimentary lift gate serviceon all freight shipments where it’s possible. We guarantee safe delivery!
Low shipping rates for customers. We have negotiated the best possible rates for customers from our trusted carriers (ODFL, ESTES, UPS, and FedEx).
Negotiate shipping rates if you think we can do better please reach out. Keep in mind some shipping rates also include assembly & configuration that as well!
Customer Reviews
Overall rating: 4.7 / 5 from 113 reviews.
I've started using the mulcher I on several parcels of land 10 acres . I have grind down a couple of 14 inch stumps. Caution the mount bracket behind the mulcher motor exhaust gets extremely hot even with gloves on . But the unit so far seems to works very good it's well put together.
The Firminator G3 is s heavy duty quality machine. The discs worked extremely well and planting and culti-packing is very smooth and easy. Working with Dillon at Ripping It Outdoors was a very good experience and seamless transaction.
The week before leaving for my mule deer hunt in Wyoming, I seeded the area surrounding the new runway at Wertheimer Airport in Norman.
This past Tuesday, I returned to finish the job and was pleased to see that the seed I planted just two weeks earlier was already germinating and coming up nicely.
These pictures show the freshly seeded areas alongside those planted two weeks ago. It’s a great comparison and a good example of what proper seedbed preparation and planting can accomplish.
I used my Ferminator G-3, which is one impressive piece of equipment. It prepares the seedbed, plants the seed, smooths the soil, and firms everything up for good seed-to-soil contact—all in one efficient operation.
I’ve owned and operated several no-till drills over the years, but I can say without hesitation that the Ferminator is the most efficient and versatile seeding machine I’ve ever owned.
There’s something pretty satisfying about returning to a job and seeing those first green shoots coming through the ground. That’s when you know your hard work is paying off!
Just got my Buffalo Turbine! Love it. Took a little bit to get used to getting the right angle for the nozzle, but not a problem. Side note, works much better if the frame is level as much as possible.
Love it!
Gary Haddock
Seems to be in order delivery wasn't able to use lift gate but tractor was able to take pallet off the truck bed. No damage to machine after visual check. won't know how it runs until rain stops.
Staff at RippingitOutdoors was very quick to call and double check the type of backet needed for the unit to ensure the online order matched( to fit my skid steer quick attachment on my l2501 Kubota). Explained the teeth & belt could be ordered through them directly over the phone when/if needed as well as selling other types of custom made brackets for Utv's ect. All around Great customer service and would purchase from again.
After spending way to much money for forest mulching services I discovered this wonderful machine. It's not a giant powerhouse forest mulcher, but it does everything a property owner needs to maintain a forested property. I wish I would have found it sooner.
The Firminator is well built and functions well. I am having some trouble while planting mixed size seeds. Next time out I’ll try setting it so only the smaller seeds drop out the open it up for the larger seeds.
easy buying process and great communication. Mulcher works great, easily clears overgrown brush and even mulched a 5" thick mulberry tree fairly easily. running it off of my old 331 bobcat with no problem powering the drum at all. Only small issue which isn't a big deal is that the supplied hoses are about 16" too short to operate a full range of motion.
Over all built well. I like it is all cast iron and metal and not plastic. Had to modify fertilizer disc mount to fit correctly, nothing major, a little grinding. I modified the center link hitch point to accommodate my John Deere quick hitch. Have yet to plant with it but I’m sure it will work perfect. Love the grease fittings everywhere. Reminds me of the old farm equipment I grew up on, and still use periodically.
My firminator RT was delivered in good condition in ND. I will be using it next week. I have a 45 HP John Deere tractor that is supposed to lift 2000 lb but really struggles to lift this 6 foot firminator RT. I will just have to use in as a two pass operation for now.
I do wish there was a better operating manual for this unit. Maybe that is something you can work on.
I will give you an update once I start using it in a few days.
Great piece of equipment. Performs far better than I expected. One piece of advice - if property is significantly overgrown, consider the tractor attachment first to bring down the over growth and then switch to the UTV attachment to maintain property. No complaints worked perfectly.
The seeder is GREAT! But the shipping was VERY POOR! Over $250 in shipping cost & the unit was in a poor quality cardboard box with no substantial packaging material. Several key components were bent. It was components that need to be straight for precision seeding. I’m disappointed ☹️ that a great product was so poorly packaged for shipping.
Very pleased. Product was better than anticipated and is working well.
I expect the 2000lb feeders to last at least a decade based on my use with cattle.
If feeding wild game would likely last a lifetime with minimal maintenance.
seeds come out way to fast at lowest setting when planting alfalfa literally the only reason I bought it now I can't even use it and I can't return it so I'm stuck with it for the price you pay you would think it would work!
It’s built solid. It handles Field grass hip high pretty well. With the maintaining the field grass after the first cut, the pasture field is starting to look like a lawn. The 84 inch with the best thing to get for 8 acres. It’s best to order belts for back up in the event if the belts were to break. But overall, I like the product quality is good.
When I think of ripping it outdoors something else comes to mind, but I digress. This spreader is awesome. Works like a champ. The hopper is big enough to do my 1 acre lot for my applications. Just load once and go. I would highly recommend this spreader. It saves a ton of time and is a quality product.