1 1

Newmar Power

Newmar 12-12-3i Power Stabilizer [12-12-3I]

Newmar 12-12-3i Power Stabilizer [12-12-3I]

$312.00
$0.00 $312.00
Sale Sold out
Customizable
Fast
24/7 Support

12-12-3i Power Stabilizer

Feed sensitive electronics with proper voltage, regardless of the battery condition. This stabilizing converter provides continuous, precisely regulated output over the entire range of a battery’s usable voltage. This prevents subjecting loads to fluctuating input voltage, which can cause shutdown, diminish performance, and possibly damage sensitive circuitry.

This converter provides total input/output isolation, virtually eliminating conducted line noise and permitting the connection of negative ground gear to positive or floating ground systems, or vice versa. It can be modified for use as a battery charger, allowing them to maintain a battery at a great distance from the primary voltage source, providing reserve power if the main source fails. The rugged anodized aluminum case is ideal for marine applications.

Application Benefits Include:

  • Operate electronics at optimal input voltage, even from nearly drained batteries
  • Boost voltage to compensate for voltage drops in long wire runs from batteries
  • Eliminate voltage drops during momentary high current drain from batteries, as during engine start
  • Eliminate voltage fluctuation from charge sources
  • Eliminate voltage overshoot due to sudden removal of high current load

Specifications:

  • Input Voltage: 10-16
  • Input Amps: 4
  • Output Voltage: 13.6
  • Output Amps (Intermittent): 3
  • Output Amps (Continuous): 3
  • Case Size (H x W x D): 3.5 x 3.5 x 1.75 inches (8.9 x 8.9 x 4.5 centimeters)
  • Weight: 1 lb. (.45 kg)
  • Output: 12 or 24V, nominal, see matrix
  • Ripple: 150 mV P-P maximum
  • Regulation: 1% Line/Load

Duty Cycle Ratings:

  • Intermittent: 20 minutes max on time, 20% duty. Current limit is set at approx. 105% of intermittent rating.
  • Continuous: 24 hours, 100% duty
  • Idle Current: Less than 100 mA (including power “ON” light )
  • Operating Temp: 0-50 degrees C, Derate Linearly From 100% @ 40 degrees C To 50% @ 50 degrees C. Thermal shutdown @ 70 degrees C Case Temperature.
  • Switching Frequency: 40 kHz.
  • Efficiency: 85% – Typical.
  • Isolation – Output/Chassis; Input/chassis: 250 VDC

Mechanical Specifications:

  • Anodized aluminum heat sink case
  • Front panel terminal block
  • Heavy-duty mounting flange
  • Conformal-coated PC board

Options/Factory Modifications:

  • Operation as a battery charger (contact factory)
  • Parallel/redundant operation (contact factory)
  • High-vibration mounting kit
  • Non-standard output voltage (contact factory)

Option: Extreme Vibration Mounting Kit

The Extreme Vibration Mounting Kit is available to protect NEWMAR power converters from the extreme stresses of shock and vibration when mounted on high-vibration vehicles.

The kit (pictured here) replaces the standard vibration kit provided with the unit and fits into the unit’s mounting flange to act as a “super shock absorber” for electronics in high-vibration applications. It is available to fit all NEWMAR units from 2 to 70 lbs. Specify KIT–L for units that weigh 2–15 lbs. and Kit–H for units that weigh 16-70 lbs.

This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
View full details

Customer Reviews

Overall rating: 4.7 / 5 from 107 reviews.

Customer photo review of Ranew Outdoors Firminator G3 Planter 4ft, 5ft, 6ft & 8ft | 3 in 1 Food Plot Implement | 3pt Planter | Discs, Seeder & Cultipacker | For Tractor

The week before leaving for my mule deer hunt in Wyoming, I seeded the area surrounding the new runway at Wertheimer Airport in Norman. This past Tuesday, I returned to finish the job and was pleased to see that the seed I planted just two weeks earlier was already germinating and coming up nicely. These pictures show the freshly seeded areas alongside those planted two weeks ago. It’s a great comparison and a good example of what proper seedbed preparation and planting can accomplish. I used my Ferminator G-3, which is one impressive piece of equipment. It prepares the seedbed, plants the seed, smooths the soil, and firms everything up for good seed-to-soil contact—all in one efficient operation. I’ve owned and operated several no-till drills over the years, but I can say without hesitation that the Ferminator is the most efficient and versatile seeding machine I’ve ever owned. There’s something pretty satisfying about returning to a job and seeing those first green shoots coming through the ground. That’s when you know your hard work is paying off!

Thomas P. 5/5

Ranew Outdoors Firminator G3 Planter 4ft, 5ft, 6ft & 8ft | 3 in 1 Food Plot Implement | 3pt Planter | Discs, Seeder & Cultipacker | For Tractor

Customer photo review of Forax Gas Powered Mulcher | Model GP40 | 40" Cutting Width | 14-15 HP | For Tractors

Seems to be in order delivery wasn't able to use lift gate but tractor was able to take pallet off the truck bed. No damage to machine after visual check. won't know how it runs until rain stops. Staff at RippingitOutdoors was very quick to call and double check the type of backet needed for the unit to ensure the online order matched( to fit my skid steer quick attachment on my l2501 Kubota). Explained the teeth & belt could be ordered through them directly over the phone when/if needed as well as selling other types of custom made brackets for Utv's ect. All around Great customer service and would purchase from again.

Dwayne G. 5/5 Verified

Forax Gas Powered Mulcher | Model GP40 | 40" Cutting Width | 14-15 HP | For Tractors

Customer photo review of Ferntree Mini Excavator Forestry Mulcher | Model FF-L Series | 22"-30" Cutting Width | Machine Size 2.5- 6 Ton | For Mini Excavator

easy buying process and great communication. Mulcher works great, easily clears overgrown brush and even mulched a 5" thick mulberry tree fairly easily. running it off of my old 331 bobcat with no problem powering the drum at all. Only small issue which isn't a big deal is that the supplied hoses are about 16" too short to operate a full range of motion.

Clint S. 5/5 Verified

Ferntree Mini Excavator Forestry Mulcher | Model FF-L Series | 22"-30" Cutting Width | Machine Size 2.5- 6 Ton | For Mini Excavator

Over all built well. I like it is all cast iron and metal and not plastic. Had to modify fertilizer disc mount to fit correctly, nothing major, a little grinding. I modified the center link hitch point to accommodate my John Deere quick hitch. Have yet to plant with it but I’m sure it will work perfect. Love the grease fittings everywhere. Reminds me of the old farm equipment I grew up on, and still use periodically.

Curtis L. 4/5 Verified

Cole 12 MX Multiflex Planter | Model B46-664A / 0120103 | Width 13" | Size: One Row | 3PT Hitch Planter Attachment | Horsepower 25–45 HP | For Tractor

My firminator RT was delivered in good condition in ND. I will be using it next week. I have a 45 HP John Deere tractor that is supposed to lift 2000 lb but really struggles to lift this 6 foot firminator RT. I will just have to use in as a two pass operation for now. I do wish there was a better operating manual for this unit. Maybe that is something you can work on. I will give you an update once I start using it in a few days.

John L. 5/5 Verified

Ranew Outdoor Firminator Rototiller | RT Series | Working Width 4', 6' & 8' | Tiller, Seeder & Cultipacker | Horsepower 24–55 HP | For Tractors

It’s built solid. It handles Field grass hip high pretty well. With the maintaining the field grass after the first cut, the pasture field is starting to look like a lawn. The 84 inch with the best thing to get for 8 acres. It’s best to order belts for back up in the event if the belts were to break. But overall, I like the product quality is good.

Richard C. 5/5 Verified

Farm-Maxx Grooming Mower | FMR Series | Working Width 48", 60", 72" & 84" | 15-50 HP | For Tractors

When I think of ripping it outdoors something else comes to mind, but I digress. This spreader is awesome. Works like a champ. The hopper is big enough to do my 1 acre lot for my applications. Just load once and go. I would highly recommend this spreader. It saves a ton of time and is a quality product.

Chip M. 5/5 Verified

BEFCO | Baby-Hop Pull-Type Broadcast Spreader | Model 103 & 106 Series | 237–339 lb Capacity | 3′–20′ Spread Width | Horsepower 10 To 20 HP | For Lawn Tractors, ATVs & UTVs