VERSATILE:
Sifts sand
Levels sand
Rakes algae
Lifts and tows loads
Operated on steep terrain
ECO FRIENDLY:
Quiet 24/7 operation SILENT
Safe for fauna, flora and sand acclaimed by the scientific community
100% electric, solar panels, zero emissions
Weights:
Robot : 420 Kg - 926 lbs
Sand sifter : 200 Kg - 441 lbs
Operating Instructions:
BEFORE FIRST USE
Charging:
Open the side panels of the box to access the Bebot. Do not unload. Charge the Bebot overnight, batteries must be charged 100% before first use.
Starting the BeBot:
1. Make sure the batteries are plugged to the system 2. Turn the red button on, at the top of the X-Bot. An Orange light will flash. 3. Always turn off the remote when stepping in the “working area” (2m around BeBot) 4. Turn on the remote by pushing the silver center button upwards. The remote will beep 5. Push the right stick downwards (one short push): the remote will connect to the X-Bot
Attaching the sand sifter:
1. Align both X-Bot palette and Sand Sifter palette. 2. Move the Xbot backward to align the sand sifter docking systems and the Xbot. Warning: Never plug or unplung the Sand Sifter when Xbot is on 3. Turn off the X-Bot, plug the Sand sifter cable at the back of the Xbot. 4. Turn the X-Bot on again. Don’t go forward with the X-bot to the risk of tearing the cable out. 5. Lock the docking systems together, using the right stick of the remote to go upwards and downwards. 6.
Unloading:
Once the sifter is locked, place the pin in. Ramps are supplied to allow a safe descent of the Bebot from the pallets Raise the sifter to the maximum height and drive of the palette using the ramp.
Storage:
Strictly store the Bebot in a dry environment, with a temperature between 5 to 30°C // 41 to 86°F.
During storage, battery must be recharged every 3-5 weeks to prevent battery damage. Do not leave the batteries
discharged for more than 48h.
After each use clean the Bebot:
We recommend using an air blower to remove the sand easily.
Water can be used. Do not spray water on the electronics box and batteries
Safety rules:
Make sure you are clear from the working area, 2 meters around the Bebot • If you need to get in the working area, wear safety shoes and gloves.
Do not lay under the sand sifter when it is in up position.
Do not open the rear door of the sand sifter when it is in downward position.
- Let us make sure you are getting the perfect cleaning system and you have all your needs covered. Check out the full line up of:
The Searial Cleaners!