1 5

Turbo Turf

Turbo Turf Hydroseeder | Model HS-300-EH & HS-300-EH-P | Capacity 300 Gallon | 13 HP | Skid/Trailer Type

Turbo Turf Hydroseeder | Model HS-300-EH & HS-300-EH-P | Capacity 300 Gallon | 13 HP | Skid/Trailer Type

$7,995.00
$7,995.00
Sale Sold out
Customizable
Fast
24/7 Support
  • Engine and Pump: 13 H.P. Honda electric start engine with a 3" x 3" centrifugal pump (333 GPM, 72 PSI)
  • Tank Capacity: 300 gallons, ideal for seeding up to 4,000 sq. ft. per load
  • High-Quality Hose: 100 ft. of durable, lightweight 1 1/4" hose with three nozzles (wide, medium, and straight)
View full details

Product Description

Turbo Turf Hydroseeder | Model HS-300-EH & HS-300-EH-P | Capacity 300 Gallon | 13 HP | Skid/Trailer Type

Lead Time:

  • HE & Harve Series - 24 - 26 Week 
  • The T models 400 and up - 10 - 12 Week 
  • Small 50-150 to Jet agitated models - 2 - 4 Week
  • 300 is - 4-6 Week 

DESCRIPTION

The HS-300-EH is a powerful 300-gallon skid-type hydroseeder designed for efficient and effective residential and commercial seeding projects. Featuring a robust 13 H.P. Honda electric start engine coupled to a 3" x 3" centrifugal pump delivering 333 GPM at 72 PSI, this unit ensures rapid mixing and precise application of hydroseeding materials. It comes equipped with 100 feet of 1 1/4" discharge hose and three nozzles (wide hydroseeding, medium, and straight) for versatile application.

PUMP

This unit used a MIG-30 centrifugal pump with 333 gallons a minute of flow and 72 P.S.I. of pressure.  This pump was designed specifically for hydro seeding.  The housing material is cast and it is very low maintenance.   There are no grease fittings and the only maintenance required is to winterize if at the end of the season if it is stored where temperatures go below freezing.  The pump impeller mounds on the end of the engine shaft so there is no power loss.   Typically it can operate for 5 to 10 years with no maintenance.  The only thing to be careful of is to not run it dry.

ENGINE

This unit comes with a 13 H.P. Honda electric start engine.  This has proved to be a very reliable engine with a long life.  The engine has a two year warranty and service for the engine is available.

HOSE

This unit comes standard with 100 ft of 1 1/4″ I. D. hose.   The hose we use is both strong and light weight.  It is made from a poly material with a spiral reinforcement.   Additional hose is available in 50 feet or 100 feet sections.  The unit will handle up to 200 feet of hose.

BALE TRAY

This unit comes equipped with a bale tray that is molded into the tank.  The opening is 16″ with a hinged fill lid.  The bale tray makes it easy to add mulch and other materials with a minimum of spillage.   Minimizing wasted material can add up to big savings over time.

TRAILER

The HS-300-EH-P is permanently attached to a DOT approved double axle trailer with brakes on both axles, DOT lighting, a breakaway, safety chains and an on-board test box for the breakaway battery.  The trailer has a GVW of 7000 pounds and is 14’2″ long an 84″ wide.   It is available with either a 2 5/16″ ball hitch or a pintle hitch.

Key Features

  • Engine and Pump: 13 H.P. Honda electric start engine directly coupled to a high-volume 3" x 3" centrifugal pump, providing 333 GPM at 72 PSI.
  • Tank Capacity: 300 Gallons with a skid size of 45" x 92", and overall dimensions of 62" x 93" x 52".
  • Material Application: Capable of seeding 4,000 square feet per load, with a seeding rate of up to 2 acres per day with adequate water supply.
  • Mixing Efficiency: Rapid mixing with a full load; can handle partial loads efficiently. Material is applied at approximately 50 G.P.M., with a spray distance of approximately 55 feet using the straight nozzle.
  • Control and Versatility: Operators have full control over flow, allowing for quicker mixing, precise trimming, and extended reach on hillsides.
  • Construction and Design: Features include a bale tray for easy loading, quick coupler jets for service access, and a quick disconnect for the discharge hose.
  • Ease of Operation: Designed for one-person operation, suitable for mounting on trucks or operation from trailers.
  • Materials Compatibility: Suitable for hydroseeding with 2 to 3 bales of hydroseeding mulch per load, along with appropriate seed and fertilizer for 4,000 square feet.

Detailed Specifications

Specification Details
Tank Capacity 300 Gallons
Engine 13 H.P. Honda Electric Start
Pump 3" x 3" centrifugal, 333 GPM, 72 PSI
Skid Size 45" x 92"
Overall Size 62" x 93" x 52"
Coverage per Load 4,000 sq. ft.
Empty Weight 715 pounds
Loaded Weight 3,100 pounds
Standard Hose 100 feet

Material Cost Breakdown

50-Gallon Hydroseeder

  • Mulch: 0.5 bales at $11.95 per bale = $5.98
  • Seed: 5 pounds at $2.05 per pound = $10.25
  • Fertilizer: 1.33 pounds at $2.19 per pound = $2.91
  • Tackifier: 0.67 oz at $1.00 per oz = $0.67
  • Total Material Cost for the Load: $19.81
  • Coverage: Approximately 667 sq. ft.
  • Cost per Sq. Ft.: 2.97 cents per sq. ft.
  • 10,000 Sq. Ft. Residential Job:
    • At 10 cents per sq. ft.: Charge = $1,000.00; Material Cost = $297.00; Profit = $703.00.
    • At 15 cents per sq. ft.: Charge = $1,500.00; Material Cost = $297.00; Profit = $1,203.00.

100-Gallon Hydroseeder

  • Mulch: 1 bale at $11.95 per bale = $11.95
  • Seed: 10 pounds at $2.05 per pound = $20.50
  • Fertilizer: 2.67 pounds at $2.19 per pound = $5.85
  • Tackifier: 1.33 oz at $1.00 per oz = $1.33
  • Total Material Cost for the Load: $39.63
  • Coverage: Approximately 1,333 sq. ft.
  • Cost per Sq. Ft.: 2.97 cents per sq. ft.
  • 10,000 Sq. Ft. Residential Job:
    • At 10 cents per sq. ft.: Charge = $1,000.00; Material Cost = $297.00; Profit = $703.00.
    • At 15 cents per sq. ft.: Charge = $1,500.00; Material Cost = $297.00; Profit = $1,203.00.

150-Gallon Hydroseeder

  • Mulch: 1.5 bales at $11.95 per bale = $17.93
  • Seed: 15 pounds at $2.05 per pound = $30.75
  • Fertilizer: 4 pounds at $2.19 per pound = $8.76
  • Tackifier: 2 oz at $1.00 per oz = $2.00
  • Total Material Cost for the Load: $59.44
  • Coverage: Approximately 2,000 sq. ft.
  • Cost per Sq. Ft.: 2.97 cents per sq. ft.
  • 10,000 Sq. Ft. Residential Job:
    • At 10 cents per sq. ft.: Charge = $1,000.00; Material Cost = $297.00; Profit = $703.00.
    • At 15 cents per sq. ft.: Charge = $1,500.00; Material Cost = $297.00; Profit = $1,203.00.

500-Gallon Hydroseeder

  • Mulch: 5 bales at $11.95 per bale = $59.75
  • Seed: 50 pounds at $2.05 per pound = $102.50
  • Fertilizer: 13 pounds at $2.19 per pound = $28.47
  • Tackifier: 6.67 oz at $1.00 per oz = $6.67
  • Total Material Cost for the Load: $197.39
  • Coverage: Assuming linear scaling, a 500-gallon unit covers approximately 6,667 sq. ft.
  • Cost per Sq. Ft.: 2.96 cents per sq. ft.
  • 10,000 Sq. Ft. Residential Job:
    • At 10 cents per sq. ft.: Charge = $1,000.00; Material Cost = $296.70; Profit = $703.30.
    • At 15 cents per sq. ft.: Charge = $1,500.00; Material Cost = $296.70; Profit = $1,203.30.

750-Gallon Hydroseeder

  • Mulch: 7.5 bales at $11.95 per bale = $89.63
  • Seed: 75 pounds at $2.05 per pound = $153.75
  • Fertilizer: 20 pounds at $2.19 per pound = $43.80
  • Tackifier: 10 oz at $1.00 per oz = $10.00
  • Total Material Cost for the Load: $297.18
  • Coverage: Approximately 10,000 sq. ft.
  • Cost per Sq. Ft.: 2.97 cents per sq. ft.
  • 10,000 Sq. Ft. Residential Job:
    • At 10 cents per sq. ft.: Charge = $1,000.00; Material Cost = $297.18; Profit = $702.82.
    • At 15 cents per sq. ft.: Charge = $1,500.00; Material Cost = $297.18; Profit = $1,202.82.

1000-Gallon Hydroseeder

  • Mulch: 10 bales at $11.95 per bale = $119.50
  • Seed: 100 pounds at $2.05 per pound = $205.00
  • Fertilizer: 26.67 pounds at $2.19 per pound = $58.43
  • Tackifier: 13.33 oz at $1.00 per oz = $13.33
  • Total Material Cost for the Load: $396.26
  • Coverage: Approximately 13,333 sq. ft.
  • Cost per Sq. Ft.: 2.97 cents per sq. ft.
  • 10,000 Sq. Ft. Residential Job:
  • At 10 cents per sq. ft.: Charge = $1,000.00; Material Cost = $297.00 (rounded); Profit = $703.00.
  • At 15 cents per sq. ft.: Charge = $1,500.00; Material Cost = $297.00; Profit = $1,203.00.

General Supply Information for a One Acre Job

Paper Mulch Covering:

  • 1000 lbs per acre: 25 40# paper bales, $21.95 per bale, totaling $548.75
  • 1200 lbs per acre: 30 40# paper bales, $21.95 per bale, totaling $658.50
  • 1500 lbs per acre (steeper slope): 38 40# paper bales, $21.95 per bale, totaling $834.10

Fertilizer:

  • 2-4 bags per acre
  • For residential use: 4 bags
  • For non-residential use: 2 bags
  • Cost per bag: $59.95

Trafficker:

  • For flat to slight slope: Turbo Tack, covers one acre, $49.95

Tracker:

  • For slopes: Witches Brew, covers one acre, $69.96

Wood Blend Mulch or 100% Wood:

  • Typical coverage: 2000 lbs per acre
  • For steep slopes: Up to 3500 lbs per acre

Seed Costs:

  • Reach out to us or check your local seed supplier

How Quickly Can I Do a 10,000sf Hydroseeding Job?

50-Gallon Hydroseeder:

  • Coverage per Load: Approximately 667 sq. ft.
  • Number of Loads Needed: About 15 loads (10,000 / 667).
  • Estimated Time per Load: Assuming approximately 20 minutes per load (including refilling and application).
  • Total Time: 15 loads x 20 minutes = 300 minutes or 5 hours.

100-Gallon Hydroseeder:

  • Coverage per Load: Approximately 1,333 sq. ft.
  • Number of Loads Needed: About 8 loads (10,000 / 1,333).
  • Estimated Time per Load: Assuming approximately 25 minutes per load.
  • Total Time: 8 loads x 25 minutes = 200 minutes or about 3 hours and 20 minutes.

150-Gallon Hydroseeder:

  • Coverage per Load: Approximately 2,000 sq. ft.
  • Number of Loads Needed: 5 loads (10,000 / 2,000).
  • Estimated Time per Load: Assuming approximately 30 minutes per load.
  • Total Time: 5 loads x 30 minutes = 150 minutes or 2.5 hours.

300-Gallon Hydroseeder:

  • Coverage per Load: Approximately 4,000 sq. ft.
  • Number of Loads Needed: 2.5 loads (10,000 / 4,000).
  • Estimated Time per Load: Assuming approximately 40 minutes per load.
  • Total Time: 2.5 loads x 40 minutes = 100 minutes or about 1 hour and 40 minutes.

500-Gallon Hydroseeder:

  • Coverage per Load: Approximately 6,667 sq. ft.
  • Number of Loads Needed: 1.5 loads (10,000 / 6,667).
  • Estimated Time per Load: Assuming approximately 45 minutes per load.
  • Total Time: 1.5 loads x 45 minutes = 68 minutes or about 1 hour and 8 minutes.

750-Gallon Hydroseeder:

  • Coverage per Load: Approximately 10,000 sq. ft.
  • Number of Loads Needed: 1 load.
  • Estimated Time per Load: Assuming approximately 50 minutes per load.
  • Total Time: 50 minutes.

1000-Gallon Hydroseeder:

  • Coverage per Load: Approximately 13,333 sq. ft.
  • Number of Loads Needed: 1 load.
  • Estimated Time per Load: Assuming approximately 50 minutes per load.
  • Total Time: 50 minutes.

Hydroseeder Options & Add-Ons!

Manuals & Documents 

General Warranty Info:

  • Ripping It Outdoors works closely with our manufacturers to supply and support your products warranty needs as best as possible!
  • The majority of products come with a manufacturer represented warranty against manufacturing defects for at least a 12 month period after the date of sale. 
  • Expendable components and "wear parts" including but not limited to blades, knives, teeth, oil, chain sprockets, skid shoes, knife mounting discs, and similar components are usually excluded from manufacturer warranties.
  • Please reach out to us for any specific warranty information neededabout products and parts you can’t find!

Videos

Shipping

General Shipping Info:

  • Instantly calculate shipping quotes to the lower 48 states by 1. adding this product to your cart, 2. click continue to the checkout page and 3. enter your shipping address to check rates. Contact us for quotes for shipping to Hawaii, Alaska, Canada, Mexico and Internationally.
  • Complimentary lift gate service on all freight shipments where it’s possible. We guarantee safe delivery!
  • Low shipping rates for customers. We have negotiated the best possible rates for customers from our trusted carriers (ODFL, ESTES, UPS, and FedEx).
  • Negotiate shipping rates if you think we can do better please reach out. Keep in mind some shipping rates also include assembly & configuration as well!

Customer Reviews

Overall rating: 4.6 / 5 from 99 reviews.

Customer photo review of Forax Gas Powered Mulcher | Model GP40 | 40" Cutting Width | 14-15 HP | For Tractors

Seems to be in order delivery wasn't able to use lift gate but tractor was able to take pallet off the truck bed. No damage to machine after visual check. won't know how it runs until rain stops. Staff at RippingitOutdoors was very quick to call and double check the type of backet needed for the unit to ensure the online order matched( to fit my skid steer quick attachment on my l2501 Kubota). Explained the teeth & belt could be ordered through them directly over the phone when/if needed as well as selling other types of custom made brackets for Utv's ect. All around Great customer service and would purchase from again.

Dwayne G. 5/5 Verified

Forax Gas Powered Mulcher | Model GP40 | 40" Cutting Width | 14-15 HP | For Tractors

Customer photo review of Ferntree Mini Excavator Forestry Mulcher | Model FF-L Series | 22"-30" Cutting Width | Machine Size 2.5- 6 Ton | For Mini Excavator

easy buying process and great communication. Mulcher works great, easily clears overgrown brush and even mulched a 5" thick mulberry tree fairly easily. running it off of my old 331 bobcat with no problem powering the drum at all. Only small issue which isn't a big deal is that the supplied hoses are about 16" too short to operate a full range of motion.

Clint S. 5/5 Verified

Ferntree Mini Excavator Forestry Mulcher | Model FF-L Series | 22"-30" Cutting Width | Machine Size 2.5- 6 Ton | For Mini Excavator

Over all built well. I like it is all cast iron and metal and not plastic. Had to modify fertilizer disc mount to fit correctly, nothing major, a little grinding. I modified the center link hitch point to accommodate my John Deere quick hitch. Have yet to plant with it but I’m sure it will work perfect. Love the grease fittings everywhere. Reminds me of the old farm equipment I grew up on, and still use periodically.

Curtis L. 4/5 Verified

Cole 12 MX Multiflex Planter | Model B46-664A / 0120103 | Width 13" | Size: One Row | 3PT Hitch Planter Attachment | Horsepower 25–45 HP | For Tractor

My firminator RT was delivered in good condition in ND. I will be using it next week. I have a 45 HP John Deere tractor that is supposed to lift 2000 lb but really struggles to lift this 6 foot firminator RT. I will just have to use in as a two pass operation for now. I do wish there was a better operating manual for this unit. Maybe that is something you can work on. I will give you an update once I start using it in a few days.

John L. 5/5 Verified

Ranew Outdoor Firminator Rototiller | RT Series | Working Width 4', 6' & 8' | Tiller, Seeder & Cultipacker | Horsepower 24–55 HP | For Tractors

Put this on Kubota 900 with winch hookup. This thing is a beast (within reason). I named it ‘Homie”, cause Homie don’t play. It will take care of stuff up to about 2” in diameter. You still have to remember that this is NOT like the ones on a bobcat or larger machinery. It does have its limits. But all in all I am very satisfied with it. Now on to the good part! The staff at Ripping It are outstanding! Especially Kayla in the office. She has gone above and beyond on making sure everything went right, from ordering to questions about installation. This young lady would be of great value at ANY company ! Her knowledge and personality are like over the top. This is my first experience with Ripping It Outdoors and I can only say positive things about them. With all that being said, I do fill out reviews on things I buy, AND I give a honest review. If it’s bad then you will know it. But if it’s good, well I tell the truth ! Again Kayla, from the bottom of my heart, a great big THANK YOU for all your help and just talking to you. I feel like we’ve know each other for years!

Steve V. 5/5 Verified

Forax Gas Powered Mulcher | Model GP40 | 40" Cutting Width | 14HP Kohler Motor | For UTV Side by Sides and Tractors

TENT is easy to put up , material is tuff as told....only complaint is that i wish the bottom had about 3 to 4 inches overlap towards the inside so i could install a 2 x4 or something to help hold the tent down in high winds we have here in virginia thanks

Bill G. 4/5 Verified

30-06 Ground Blind Native - Spirit 600d 48"x48"x62" Camo

Hi, my name is Ken. I’ve had a great experience with Ripping It Outdoors. I purchased a Forax Hp40 Mulcher for my mini excavator. Kayla Patterson is who I dealt with from the beginning until I received it at my house. She has been wonderful to work with and looking forward to working with her with any other orders I purchase. Kayla answered any questions I had and kept me updated throughout the whole process, can’t say it enough just a wonderful person to work with!!

Ken B. 5/5 Verified

Forax Ultralight Mulcher | Model HP40 | Cutting Width 40" | Carrier 2-4-Ton | For Excavators

These are great feeders if you don’t have any feral hogs but if the hogs tear off the wiring harness from the timer to the feeder motor, you’re disabled. Then, if you ask for help from Outback, they refer you to the dealer but really you’re on your own for parts and repairs. I have three Outback feeders that work as designed. They’re 13 years old and have always served well but this feeder misses the mark by a very high margin. I’d NEVER buy this product again. Feeders need to be dependable and this unit is not.

Bob M. 2/5

Outback Wildlife Baby-Back Low Profile Pistolero Directional Unit Feeders | Available in 400#, 600# and 1000# Capacities | Lid Opening 16" and 24"