The BatteryProtect disconnects the battery from non essential loads before it is completely discharged (which would damage the battery) or before it has insufficient power left to crank the engine.
12/24V auto ranging The BatteryProtect automatically detects system voltage
Programming made easy The BatteryProtect can be set to engage / disengage at several different voltages. The seven segment display will indicate which setting has been chosen.
A special setting for Li-ion batteries In this mode the BatteryProtect can be controlled by the VE.Bus BMS. Note: the BatteryProtect can also be used as a charge interrupter in between a battery charger and a Li-ion battery. See connection diagram in the manual.
Ultra low current consumption This is important in case of Li-ion batteries, especially after low voltage shutdown. Please see our Li-ion battery datasheet and the VE.Bus BMS manual for more information.
Over voltage protection To prevent damage to sensitive loads due to over voltage, the load is disconnected whenever the DC voltage exceeds 16V respectively 32V.
Ignition proof No relays but MOSFET switches, and therefore no sparks.
Delayed alarm output The alarm output is activated if the battery voltage drops below the preset disconnect level during more than 12 seconds. Starting the engine will therefore not activate the alarm. The alarm output is a short circuit proof open collector output to the negative (minus) rail, max. current 50 mA. The alarm output is typically used to activate a buzzer, LED or relay. Delayed load disconnect and delayed reconnect The load will be disconnected 90 seconds after the alarm has been activated. If the battery voltage increases again to the connect threshold within this time period (after the engine has been started for example), the load will not be disconnected. The load will be reconnected 30 seconds after the battery voltage has increased to more than the preset reconnect voltage.
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
Please contact your dealer for any returns, repairs or support issues related to this product. Quick Guide (pdf)
I've started using the mulcher I on several parcels of land 10 acres . I have grind down a couple of 14 inch stumps. Caution the mount bracket behind the mulcher motor exhaust gets extremely hot even with gloves on . But the unit so far seems to works very good it's well put together.
The Firminator G3 is s heavy duty quality machine. The discs worked extremely well and planting and culti-packing is very smooth and easy. Working with Dillon at Ripping It Outdoors was a very good experience and seamless transaction.
After spending way to much money for forest mulching services I discovered this wonderful machine. It's not a giant powerhouse forest mulcher, but it does everything a property owner needs to maintain a forested property. I wish I would have found it sooner.
The Firminator is well built and functions well. I am having some trouble while planting mixed size seeds. Next time out I’ll try setting it so only the smaller seeds drop out the open it up for the larger seeds.
easy buying process and great communication. Mulcher works great, easily clears overgrown brush and even mulched a 5" thick mulberry tree fairly easily. running it off of my old 331 bobcat with no problem powering the drum at all. Only small issue which isn't a big deal is that the supplied hoses are about 16" too short to operate a full range of motion.
Over all built well. I like it is all cast iron and metal and not plastic. Had to modify fertilizer disc mount to fit correctly, nothing major, a little grinding. I modified the center link hitch point to accommodate my John Deere quick hitch. Have yet to plant with it but I’m sure it will work perfect. Love the grease fittings everywhere. Reminds me of the old farm equipment I grew up on, and still use periodically.
My firminator RT was delivered in good condition in ND. I will be using it next week. I have a 45 HP John Deere tractor that is supposed to lift 2000 lb but really struggles to lift this 6 foot firminator RT. I will just have to use in as a two pass operation for now.
I do wish there was a better operating manual for this unit. Maybe that is something you can work on.
I will give you an update once I start using it in a few days.
Great piece of equipment. Performs far better than I expected. One piece of advice - if property is significantly overgrown, consider the tractor attachment first to bring down the over growth and then switch to the UTV attachment to maintain property. No complaints worked perfectly.
Put this on Kubota 900 with winch hookup. This thing is a beast (within reason). I named it ‘Homie”, cause Homie don’t play. It will take care of stuff up to about 2” in diameter. You still have to remember that this is NOT like the ones on a bobcat or larger machinery. It does have its limits. But all in all I am very satisfied with it. Now on to the good part! The staff at Ripping It are outstanding! Especially Kayla in the office. She has gone above and beyond on making sure everything went right, from ordering to questions about installation. This young lady would be of great value at ANY company ! Her knowledge and personality are like over the top. This is my first experience with Ripping It Outdoors and I can only say positive things about them. With all that being said, I do fill out reviews on things I buy, AND I give a honest review. If it’s bad then you will know it. But if it’s good, well I tell the truth ! Again Kayla, from the bottom of my heart, a great big THANK YOU for all your help and just talking to you. I feel like we’ve know each other for years!
TENT is easy to put up , material is tuff as told....only complaint is that i wish the bottom had about 3 to 4 inches overlap towards the inside so i could install a 2 x4 or something to help hold the tent down in high winds we have here in virginia thanks
Hi, my name is Ken. I’ve had a great experience with Ripping It Outdoors. I purchased a Forax Hp40 Mulcher for my mini excavator. Kayla Patterson is who I dealt with from the beginning until I received it at my house. She has been wonderful to work with and looking forward to working with her with any other orders I purchase. Kayla answered any questions I had and kept me updated throughout the whole process, can’t say it enough just a wonderful person to work with!!
These are great feeders if you don’t have any feral hogs but if the hogs tear off the wiring harness from the timer to the feeder motor, you’re disabled. Then, if you ask for help from Outback, they refer you to the dealer but really you’re on your own for parts and repairs.
I have three Outback feeders that work as designed. They’re 13 years old and have always served well but this feeder misses the mark by a very high margin. I’d NEVER buy this product again.
Feeders need to be dependable and this unit is not.
This is my first experience with Ripping It Outdoors. Fortunately I got Dillion as a representative and everything from sales to shipping was spot on..
Thanks Dillion for your help!!
The only thing is when hooking up the actuator on my ATV. The wire is long going to the plug in. What has happened in the past about this. Is their video showing the usage of the control?